AutoCAD Inventor :: Controlling Name In Assembly Browser Of Imported Part?
May 23, 2012
I have a browser display issue that occurrs sometimes when imported parts are inserted into an assembly model. Before dropping some imported parts into my assembly model I changed the filename to something corresponding to our part numbering system. When the part is dropped into the model, the name of the instance displayed in the assembly browser is the same as that originally used by the originator of the model.
I know I can change the name in the browser by editing the name field in the occurrance tab; but I'd need to do this for each instance. What iproperty field (or other property field) should I edit at the part level so that the revised part name is used in the assembly browser whenever that part is inserted into an assembly?
View 2 Replies
ADVERTISEMENT
Mar 22, 2012
When I bring in a .sat file, I see these little "i" in the browser. The red Cross is dimmed. If I hover over the icon, it doesnt tell me anything. I can right click on Base2 and choose edit solid, and the "i" goes away, but something is still not right. I know something is wrong, because the mass is not correct for this part.
Notice the green check by "Base 3"? After I edit "Base 2", I do not have a check by it.
How do I get this to report the mass correcly.
View 1 Replies
View Related
Feb 8, 2012
using IV2012 within the same project file i have three models. one model i can open parts or assemblies from the browser or right click on the component on the window. the other two models upon the right click or selecting in the browser the open or the edit are not available as an operation.
T7400-64bit XP
Xeon 3.2 GHz, 8GB
1.5GB NVIDIA Quadro FX5600
Factory Design Suite 2012
View 1 Replies
View Related
Nov 15, 2012
I use Inventor 2013 as a single user, my company is about to invest in Vault and we are about to introduce a new automated Part Numbering Scheme as well.
I use a spreadsheet and iLogic rules as ‘Product Configurator’ to generate new iterations of my master assembly.
Now, the Assembly Browser in Inventor may display my assembly tree and its components by Part No or File Name or Default Browser Nod. See attached image.
This can be selected and set on the ribbon: click Assemble tab Productivity panel Rename Browser Nodes.
For example at Top Level Assy I have a rule to run other rules in components. Should I change the displayed components names on the Assy Tree the rules loose reference. So they wouldn’t run.
(for example: iLogicVb.RunRule("PANEL ASSY 2ndS:1", "Tie Rods & Washer Plates 2ndS")
PANEL ASSY 2ndS:1 is a component with a rule in it "Tie Rods & Washer Plates 2ndS"
This is the default Browser Nod Name and it could also be
- AAA-0111 --> Part No
- PANEL ASSY 2ndS.iam:1 --> File name
- PANEL ASSY 2ndS:1 --> Default
I suppose this can be avoided by not changing from Default, but what an inconvenience should we have to.Unless if there is an other way to reference our components in iLogic?
View 1 Replies
View Related
Dec 24, 2013
Code that can provide basic information of the highlighted browsernode on the browser bar? i can get a mouseclick but not sure on the mousemove.
View 2 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
Jun 9, 2013
I don't remember... what is it?
How can i create it...and why?
View 9 Replies
View Related
Dec 11, 2013
I would like to simplify this assembly into one seamless part for FEM calculation:The assembly consists out of parts that, in reality, will be welded together. Due to their form, there is no way to place them exactly onto each other, therefore there are slight gaps between the parts:
Now when I try to merge the assembly into one part via "simplify" --> "create simplified part" and choose "single solid body with seams between planar faces merged", Inventor does not fill these gaps (even though it displays only one part in the bottom right corner of my window). Unfortunately, the remaining gaps brings "contact" problems in the FEM simulation.
how to close the gaps and really merge the assembly into one part?
View 6 Replies
View Related
Nov 15, 2013
New user 2014
Part created in assembly does not update to part file.
View 9 Replies
View Related
Mar 29, 2012
I have a part that has protrusions. When i mate that part up to another part that second part needs to have cutouts/holes to receive those protrusions.
i mainly use it in sheetmetal parts. and use the rectangular protrusions on de contour to mate up with corresponding cutouts in the other sheet. this works with positioning and also makes for a nice weld spot/area.
But also for making holes to accommodate a mold pin used in custom punch dies. I want the intervening part to receive a corresponding (propperly tolleranced) hole automatically. Much like a bolted connection does.
same for parts like circlips. i want them to automatically generate the seat in the part it's mated to. Rather than using the axle generator.
Ofcourse one can place the parts and do an in assembly interpart projection and go from there, but i want the part to generate the (predifined) modification to the other part. It would save time and also reduces problems as the parts are moved about or even removed.
View 7 Replies
View Related
Jul 1, 2013
I have an assembly with 10 parts in it. We use many assembly features at the assembly level (Revolve cut, Extrusion cut..etc). How to find the mass difference of each part by comparing at its parts level and its assembly level.
View 1 Replies
View Related
Oct 3, 2013
I have a two part duct fire damper assembly. The IDW has the combined two part assembly, which I know how to turn the CoG on, so that it can be dimensioned. The problem is each piece will more than likely be hoisted separately so I would like to show the CoG for each piece, not the combined master assy.is there a way to do this?
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 5 Replies
View Related
Aug 20, 2013
If I want to find part which is inside another part or assembly, which means no matter how I turn camera, I always cannot see that part.
Does inventor has this function? Or is it possible to develope by .NET API?
View 4 Replies
View Related
Feb 7, 2013
I can't seem to find how to use the Inventor 2012 API to project an entire sketch profile from one .ipt to another .ipt file from within an .iam file.
i7-2720QM Dell Precision M6600, Win 7 Pro 64-bit, 8GB RAM
Autodesk Product Design Suite Ultimate 2013
Autodesk Vault Professional 2013
View 2 Replies
View Related
Dec 3, 2013
Why when I mirror a part in an assembly the mirrored part gets a new part number? I want to mirror only the position of the part which is always the same part. Is it possible to do that in Inventor?
View 7 Replies
View Related
Feb 19, 2013
I changed the name of a valve manually in the browser. Now, when I copy the valve to a different part name it does not update the name of the new part in the browser. How do I get the part name in the browser to be dynamic again?
View 5 Replies
View Related
Jan 14, 2013
I have the attached symbol next to parts in an assembly, I'm not sure what this is, I have updated all components in the assembly and checked that in the sketch doctor for error however there are none.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
May 5, 2004
Is there a setting or something somewhere that turns off/on the display of the origin folder? I have rebooted and restarted Inventor. For some reason, I can't get see the folder. Even when I edit a part, it is not there. See attached images.
View 5 Replies
View Related
Jul 29, 2012
I have one doubt i have one big assembly in that more than thousand parts.
my doubt is how to find particular part in browser bar.
like how to search particular part number in browser bar.
View 2 Replies
View Related
Jun 13, 2011
I need to make installation plans on climate ceilings, which are steel cassettes with Meandro tube element located where cold or hot water is flowing through.
[URL]......
Now it may occur that a cassette is given a code 700 which represents the type of cassette. If inside the cassette is placed a Meandro element its become a follow number eg 700-01.
It may also be that the same cassette No. 700 gets another Meandro element and because the cassette has not changed shape the number 700 remains the same but the follow number change e.g. 700-02.
At the moment I change the number in the browser,(inv2012) I therefore want automatically the iproperties ,partnumber and stock number, to fit. When I go to the BOM, the part- and stock numbers automatically will be placed.
The browser codes are not displayed in the BOM. So if I specify for change I only have to do so in the browser. I wanted to do so by iLogic but then ran into problems. I found a tutorial from Rob Cohee with ilogic so you won’t forget to fill in your iproperties.
[URL].......
I also wanted to do so with the iproprtie Stock number but get an error stating that I must declare the name. How must i declare a name.
Also i was told for entering the browse name in ilogic i had to use displayName, but I get a error stating that the name is Read Only.
So how can i, after i change the browse name, automatically fill in the iproperties ‘part number and/or stock number? Is there an ilogic code for?
View 4 Replies
View Related
Jul 2, 2013
I have a program which creates a new part. It works, but
The browser pane sets to "No Browser"The actual part window is not maximised inside the Inventor but in "normal" mode.
If I click on the brower I can go into Model mode, and the No Browser option disappears.
And I can simply maximise the window using the maximise icon in the part Window.
But how do I do these programatically? And why is there no Model browser by default?
This is C++ COM from an external EXE.
View 5 Replies
View Related
Jun 28, 2013
place a component in the assembly.
create an assembly plane based on the assembly origin planes, (not the component origin planes).
in the browser, try to drag the plane above the component.
its not working on my machine?
View 7 Replies
View Related
Jan 25, 2013
I'm using VB 2010 express. My code is getting selected part and changing some "Design Tracking Properties" of it. But when I change the properties focus goes from the selected part/sub?... How can I make part selected again? How can I make it focused.I need like below like
invDocument.SetFocus or invDocuments.MakeItSelected like...
Dim asmDoc As AssemblyDocument
asmDoc = inv_App.ActiveDocument
'********
Dim invDocument As Document = Nothing
Dim compOcc As ComponentOccurrence = Nothing
[code]...
View 2 Replies
View Related
Jan 7, 2013
Is there a way to rename browser nodes within a part in a similar way that the rename browser nodes tool works in assemblies? I am copying designs with derived parts, after copying the design I can see that the part files contain the correct links to other parts when I open the base component but they display as the old name in the browser which is not ideal.
View 4 Replies
View Related
Jan 6, 2012
I have tried the Frame Analysis for the first time and quit from this option as requested.
BUT now the subassemly consisting frame and all its parts are grey even after restarting Inventor.
Here is some bug. [URL] ....
View 6 Replies
View Related
Dec 17, 2013
A customer sent me a .step file. In order to produce the part that I need, I wanted to add some machining to his original part. Os I derived in his part and then added the features that I needed. Just a few tapped holes in one side.
Now, my customer made a few changes to his original part (added some detail) and he has sent me his new .stp file. I did not think it would be any problems if I just overwrote the original stp file with the new one. But, if I do that, when I open my part, Inventor complains that the updated part is part is not usable.
I tried saving the imported file as a .ipt and then bringing that into an assembly and doing the machining there. But, now when I replace the imported file with the updated version, my features fail.
Is there a workflow that will allow me to update the part that is derived into another part?
Using 2013,SP3-update3
View 5 Replies
View Related
Sep 19, 2012
When I suppress a part or a sub-assembly in Inventor 2013 and then right click on the suppressed item in the browser window I always get an cadabundus error message (see attachment), after I press OK I get the normal right click menu hovering over the item.
I have Inventor 2013 RTM 64 bit Build 138, and running on Vista 64bit.
View 2 Replies
View Related
Jun 21, 2013
We have imported an AutoCAD 3D model into Inventor and the process generates many individual Inventor parts which are placed in a new Inventor assembly. The parts are all unconstrained in the assembly but spacially positioned relative to each other as they were in the AutoCAD file.
We want to create a new, empty, assembly and place the individual parts one by one into the new assembly constraining them appropriately as we go. This way we can develop a more logical set of sub-assemblies and have the parts more intelligently connected.
So to the point of my question, at last!. Each individual part, generated from the import, contains just a single body. There is no sketch or any features. The part's origin is at the point of the original AutoCAD model's origin. All of the imported parts will have the same origin point. We want to move the part's single body in space to align with the part's origin point and planes. This way when we re-build the assembly we can use each part's origin planes when constraining the part.
There doesn't appear to be any way of constraining or 'snapping' a part's body in space to the origin planes.
View 1 Replies
View Related
Feb 14, 2013
I am looking at building a support for a customers part. Trouble is the part is curves and surfaces. Part doesnt have too many "flat" sides to it. I am struggling with how to get what I need. In this video, I am showing how the part will move onto the support (support is clear blue).
I created an assembly, then derived the iam into a part... subtracting out where the part will sit in the support. The problem I am having is removing the material so the part can move into the support from above.
Here is a picture of the support with the part subtracted out. I would post this, but the filesize is pretty large (18mb).
I cant seem to find a way to trim this off.
View 1 Replies
View Related
Oct 18, 2011
is it possible to rename the browser node on part level with an iLogic rule? I know that in the assembly environment is an Inventor OOTB functionality to rename the nodes to the filename, Part number or the default value.
Inventor Professional 2011
Windows 7 Enterprise 64bit
Dell Precision M4500
Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz
8 GB RAM
View 2 Replies
View Related
