AutoCAD Inventor :: Imported Part Shows I In Browser?
Mar 22, 2012
When I bring in a .sat file, I see these little "i" in the browser. The red Cross is dimmed. If I hover over the icon, it doesnt tell me anything. I can right click on Base2 and choose edit solid, and the "i" goes away, but something is still not right. I know something is wrong, because the mass is not correct for this part.
Notice the green check by "Base 3"? After I edit "Base 2", I do not have a check by it.
How do I get this to report the mass correcly.
View 1 Replies
ADVERTISEMENT
May 23, 2012
I have a browser display issue that occurrs sometimes when imported parts are inserted into an assembly model. Before dropping some imported parts into my assembly model I changed the filename to something corresponding to our part numbering system. When the part is dropped into the model, the name of the instance displayed in the assembly browser is the same as that originally used by the originator of the model.
I know I can change the name in the browser by editing the name field in the occurrance tab; but I'd need to do this for each instance. What iproperty field (or other property field) should I edit at the part level so that the revised part name is used in the assembly browser whenever that part is inserted into an assembly?
View 2 Replies
View Related
Jul 20, 2012
It was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
View 6 Replies
View Related
May 30, 2012
When copying an iam + ipn, and making some changes, the browser suddently shows far too many parts or assemblies ?
Is there a way to "update" the browser?
View 2 Replies
View Related
Feb 19, 2013
I changed the name of a valve manually in the browser. Now, when I copy the valve to a different part name it does not update the name of the new part in the browser. How do I get the part name in the browser to be dynamic again?
View 5 Replies
View Related
Jan 14, 2013
I have the attached symbol next to parts in an assembly, I'm not sure what this is, I have updated all components in the assembly and checked that in the sketch doctor for error however there are none.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Jul 29, 2012
I have one doubt i have one big assembly in that more than thousand parts.
my doubt is how to find particular part in browser bar.
like how to search particular part number in browser bar.
View 2 Replies
View Related
Jun 13, 2011
I need to make installation plans on climate ceilings, which are steel cassettes with Meandro tube element located where cold or hot water is flowing through.
[URL]......
Now it may occur that a cassette is given a code 700 which represents the type of cassette. If inside the cassette is placed a Meandro element its become a follow number eg 700-01.
It may also be that the same cassette No. 700 gets another Meandro element and because the cassette has not changed shape the number 700 remains the same but the follow number change e.g. 700-02.
At the moment I change the number in the browser,(inv2012) I therefore want automatically the iproperties ,partnumber and stock number, to fit. When I go to the BOM, the part- and stock numbers automatically will be placed.
The browser codes are not displayed in the BOM. So if I specify for change I only have to do so in the browser. I wanted to do so by iLogic but then ran into problems. I found a tutorial from Rob Cohee with ilogic so you won’t forget to fill in your iproperties.
[URL].......
I also wanted to do so with the iproprtie Stock number but get an error stating that I must declare the name. How must i declare a name.
Also i was told for entering the browse name in ilogic i had to use displayName, but I get a error stating that the name is Read Only.
So how can i, after i change the browse name, automatically fill in the iproperties ‘part number and/or stock number? Is there an ilogic code for?
View 4 Replies
View Related
Jul 2, 2013
I have a program which creates a new part. It works, but
The browser pane sets to "No Browser"The actual part window is not maximised inside the Inventor but in "normal" mode.
If I click on the brower I can go into Model mode, and the No Browser option disappears.
And I can simply maximise the window using the maximise icon in the part Window.
But how do I do these programatically? And why is there no Model browser by default?
This is C++ COM from an external EXE.
View 5 Replies
View Related
Aug 5, 2013
In an assembly of a gymnasium divider curtain, I create a path on a 3D sketch which snakes its way upward through a series of grommets. A circular profile is then swept along the path to create a new part - a cable. The cable is its own unique part document and is saved and then vaulted in a job-specific folder. The curtain assembly has several instances of this cable. Everything looks fine until the assembly is closed and later opened for editing. When the assembly is opened, the cables show up in the browser as "Unresolved." Graphically, they have disappeared.
Windows 7 Professional, 64-bit
Inventor 2013 / Vault Collaboration 2013
View 1 Replies
View Related
Jan 25, 2013
I'm using VB 2010 express. My code is getting selected part and changing some "Design Tracking Properties" of it. But when I change the properties focus goes from the selected part/sub?... How can I make part selected again? How can I make it focused.I need like below like
invDocument.SetFocus or invDocuments.MakeItSelected like...
Dim asmDoc As AssemblyDocument
asmDoc = inv_App.ActiveDocument
'********
Dim invDocument As Document = Nothing
Dim compOcc As ComponentOccurrence = Nothing
[code]...
View 2 Replies
View Related
Feb 8, 2012
using IV2012 within the same project file i have three models. one model i can open parts or assemblies from the browser or right click on the component on the window. the other two models upon the right click or selecting in the browser the open or the edit are not available as an operation.
T7400-64bit XP
Xeon 3.2 GHz, 8GB
1.5GB NVIDIA Quadro FX5600
Factory Design Suite 2012
View 1 Replies
View Related
Jan 7, 2013
Is there a way to rename browser nodes within a part in a similar way that the rename browser nodes tool works in assemblies? I am copying designs with derived parts, after copying the design I can see that the part files contain the correct links to other parts when I open the base component but they display as the old name in the browser which is not ideal.
View 4 Replies
View Related
Dec 17, 2013
A customer sent me a .step file. In order to produce the part that I need, I wanted to add some machining to his original part. Os I derived in his part and then added the features that I needed. Just a few tapped holes in one side.
Now, my customer made a few changes to his original part (added some detail) and he has sent me his new .stp file. I did not think it would be any problems if I just overwrote the original stp file with the new one. But, if I do that, when I open my part, Inventor complains that the updated part is part is not usable.
I tried saving the imported file as a .ipt and then bringing that into an assembly and doing the machining there. But, now when I replace the imported file with the updated version, my features fail.
Is there a workflow that will allow me to update the part that is derived into another part?
Using 2013,SP3-update3
View 5 Replies
View Related
Jun 21, 2013
We have imported an AutoCAD 3D model into Inventor and the process generates many individual Inventor parts which are placed in a new Inventor assembly. The parts are all unconstrained in the assembly but spacially positioned relative to each other as they were in the AutoCAD file.
We want to create a new, empty, assembly and place the individual parts one by one into the new assembly constraining them appropriately as we go. This way we can develop a more logical set of sub-assemblies and have the parts more intelligently connected.
So to the point of my question, at last!. Each individual part, generated from the import, contains just a single body. There is no sketch or any features. The part's origin is at the point of the original AutoCAD model's origin. All of the imported parts will have the same origin point. We want to move the part's single body in space to align with the part's origin point and planes. This way when we re-build the assembly we can use each part's origin planes when constraining the part.
There doesn't appear to be any way of constraining or 'snapping' a part's body in space to the origin planes.
View 1 Replies
View Related
Feb 14, 2013
I am looking at building a support for a customers part. Trouble is the part is curves and surfaces. Part doesnt have too many "flat" sides to it. I am struggling with how to get what I need. In this video, I am showing how the part will move onto the support (support is clear blue).
I created an assembly, then derived the iam into a part... subtracting out where the part will sit in the support. The problem I am having is removing the material so the part can move into the support from above.
Here is a picture of the support with the part subtracted out. I would post this, but the filesize is pretty large (18mb).
I cant seem to find a way to trim this off.
View 1 Replies
View Related
Oct 18, 2011
is it possible to rename the browser node on part level with an iLogic rule? I know that in the assembly environment is an Inventor OOTB functionality to rename the nodes to the filename, Part number or the default value.
Inventor Professional 2011
Windows 7 Enterprise 64bit
Dell Precision M4500
Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz
8 GB RAM
View 2 Replies
View Related
Nov 6, 2013
Whenever I mport a part it has the welding texture applied to it. Where can I change it to so I don't have go around and select the faces to clear them. Changing the material has no effect on removing the texture.
View 3 Replies
View Related
Jul 25, 2012
I have a STEP file which is of a part similar to the rudder of a boat or an oar blade but twisted at the end, and I have to draw the split line to match the profile of the blade. I imagine I have to use a 3D sketch because of the twist and we are guessing that the split line will run down the apex of the blade, but I don't know how to get the 3D sketch to "stick" to the apex (there is no real apex as it's curved).
View 5 Replies
View Related
Nov 17, 2011
I would like the size of bearing to be included in addition to existing data to the File name, Part number and Browser name like for example the DIN 625 T1 does. I have copied the DIN 625 bearings to the custom library. I have added required info to File Name building and to the Part Number building in the custom library and now my Filename and Part Number are as I like to.
But I cannot find how to force the Browser name to be equal to Part number or File Name? [URL]
View 2 Replies
View Related
Jun 4, 2012
Why can’t Inventor Fusion save an imported STP file as a Inventor part?
View 1 Replies
View Related
Aug 9, 2012
how to import into a derived part the following iprops:
1. some of the iprops from the "Project" tab
2. the material from the "Physical" tab
Objective: I want to propagate those iprops into the derived part to prevent any errors down-line.
IV 2010 Suite
Digital Storm PC:
EVGA & Intel components
Win 7 Pro 64 bit
View 4 Replies
View Related
Oct 29, 2012
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies
View Related
Apr 8, 2013
I am trying to use the Browsernode.addchild method to add an occurence to an empty browser folder. The code fails at this point and I gett an error pointing to the line "Call oTargetNode.AddChild(oSourceNodeDef)". I can add the occurence with the browserpanes.Reorder method without issue if the folder is not empty. The code is pasted Below.
Format:HTML Format Version:1.0 StartHTML: 165 EndHTML: 29338 StartFragment: 314 EndFragment: 29306 StartSelection: 314 EndSelection: 314
SyntaxEditor Code Snippet
DimPrcsTpAsStringPrcsTp=InputListBox("Process Type?", MultiValue.List("ProcessType"), Parameter("ProcessType"), Title :="Select Process Type", ListName :="Process Type")DimRtgNameAsStringRtgName=PrcsTp&"-"&Parameter("NoRtgsInc")+1MessageBox.Show(RtgName, "Title",MessageBoxButtons.OKCancel)DimoAsmAsAssemblyDocument=ThisDoc.DocumentDimoMatrixAsMatrix=ThisApplication.TransientGeometry.CreateMatrixDimoOccAsComponentOccurrenceoOcc=oAsm.ComponentDefinition.Occurrences.AddVirtual(RtgName, oMatrix)DimoCompDefVirtualAsVirtualComponentDefinition=oOcc.Definition'CREATE AND SET THE
[code]....
View 1 Replies
View Related
Nov 7, 2011
When I press F1 Inventor opens the help on my default browser (Chrome), but when I click the bynocular it uses Internet Explorer.
Is it possible to force Inventor to use a browser of my choice or the default browser?
View 1 Replies
View Related
Nov 1, 2012
I have designed a layout in Illustrator (CS5.1) for a webpage. I save for web with transparency and when I view in a browser there is a gray outline of the artboard from illustrator. How to remove this outline?
View 1 Replies
View Related
Jul 17, 2012
In CS6 Bridge it shows an image that has been first time imported and put thru raw and photoshop. that the process version is 6.7. Should that not read 7.1. Images taken on canon EOS 450D
View 14 Replies
View Related
Oct 31, 2012
When I open Photoshop all my actions are there. But after using the program for a minute or two and then clicking the icon in the top right for ALL my actions, I find that I now have only one-panel of actions in alphabetical order and it only goes through part of the Cs. Closing the program brings it back to normal, but again, after a few minutes use, most of the actions are again inaccessible.
View 1 Replies
View Related
Nov 2, 2012
I like the 3D Tool but is it possible to use the 3D tool to raise the nontransparent part of an imported image while leaving the transparent part flat?
View 3 Replies
View Related
Nov 15, 2011
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
View 7 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
