AutoCAD Inventor :: Browser Shows Everything But No Model Shows Up On Workspace Screen
Jul 20, 2012
It was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
View 6 Replies
ADVERTISEMENT
Feb 16, 2012
For some reason, in CS3 I have an opening in the editing space which allows other applications, or the finder, to show through.
How can I grey out that space so it isn't transparent?
View 21 Replies
View Related
Mar 22, 2012
When I bring in a .sat file, I see these little "i" in the browser. The red Cross is dimmed. If I hover over the icon, it doesnt tell me anything. I can right click on Base2 and choose edit solid, and the "i" goes away, but something is still not right. I know something is wrong, because the mass is not correct for this part.
Notice the green check by "Base 3"? After I edit "Base 2", I do not have a check by it.
How do I get this to report the mass correcly.
View 1 Replies
View Related
May 30, 2012
When copying an iam + ipn, and making some changes, the browser suddently shows far too many parts or assemblies ?
Is there a way to "update" the browser?
View 2 Replies
View Related
Oct 30, 2013
When I try to open any file in PS6 (jpg, png, psd), it shows open in the history but the file doesn't show up on the work space. I have never had this happen to me before! I've updated everything available, too.
View 2 Replies
View Related
Nov 1, 2012
I have designed a layout in Illustrator (CS5.1) for a webpage. I save for web with transparency and when I view in a browser there is a gray outline of the artboard from illustrator. How to remove this outline?
View 1 Replies
View Related
Feb 24, 2012
I have done a drawing on my auto cad 2011 on windows and when i open it up on my auto cad 2011 for mac it only shows one layer in model space all the layers are on and thawed. how can i get the rest of my drawing to show up?
View 2 Replies
View Related
Mar 28, 2012
I have a bit issue with inserting xrefs in model space .Basically, when I insert the xref in model space, the xref shows in an angle.
View 1 Replies
View Related
Oct 23, 2012
Screen does not refresh and shows geometry from one of the viewports to the side, as you pan the window.
Geometry stays on when you go to model space.
Was working ok until Autocad suggested upgrading video performance.
Will not work even after downloading lastest video driver from NVIDIA
Acad 2012
Dell E6530
NVIDIA NVS 5200M
64-bit
View 5 Replies
View Related
Jun 19, 2013
When I preview or play a slideshow in Lightroom 5 I see a black screen. I've tried it using various settings, images, lengths, and with the show saved or unsaved, all with the same result. In a preview I can see the show advancing through the slides; all remain black.
Sometimes (unpredictably) the screen isn't black, but rather two colors or color washes separated diagonally.
There are no videos in the shows. (A black screen for a slideshow with a video as the first slide is a known issue mentioned in the Lightroom Journal.)
Exporting to pdf works properly. An exported video shows as a black screen.
(Mac Pro, OS X 10.7.5, Radeon X1900 XT video card)
View 33 Replies
View Related
Sep 18, 2013
I have upgrade to 5.2 but still have the same problem whith black screen.
View 1 Replies
View Related
Jul 12, 2012
I've just started using Photoshop CS6 via Creative cloud. (Before i used a DVD version of CS5)I'm having a weird problem with the liquify filter:When I want to open a picture in the filter it shows only a blue screen... Why? What happened?
At first I thought maybe it couldn't'nt work with the dng format and then I tried opening a jpeg in the liquify filter, same problem.I've had no problems in CS5 and I'm working on the same computer.
View 9 Replies
View Related
Apr 2, 2010
Sometimes when I view vector art on the screen the letter I shows up extra wide and big, but the printed version works fine. Example below. This only happens some of the time to me, but not always with the same piece of artwork. I think this must be a common problem.
View 8 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Oct 29, 2012
I opened the drawing and then from the drawing opened the model. In the drawing it is showing the 4th instance of ROUND CRS-032175 X 33 as an assembly. It also is not showing in the view and yet the visibility is checked. AI2012 SP2
View 1 Replies
View Related
Jan 31, 2012
.jpg export screen shows a solid black area instead of my graphic image - why? but when I open the .jpg file that was exported, it looks correct (not a large black rectangle). why is the preview window in the export window showing a large black area? see attached screenshot.
View 9 Replies
View Related
Nov 25, 2013
I'm doing an evacuation plan of an office building. The drawing itself is in the model space, obviously. The fire extinguishers and escape routes are added in layout.
The problem is that everything that I add in the layout ends up beneath the drawing in model space. I.e. the walls of the building are shown in front of the fire extinguishers which makes my evac.plan look like poop.AutoCad Architecture 2013.
View 3 Replies
View Related
Jan 3, 2013
As the subject line says, when multiple instances of Inventor are open on the same machine, the addin will only show in the first one. I do not see any errors generated and tried many approaches. I tried to use the ribbon abpannelcontrol
created by the first instance. Or in every subsequent instance of Inventor to delete the existing ribbon abpannelcontrol, and recreate them from scratch. Both approaches did not work.
View 3 Replies
View Related
Oct 26, 2011
Recently I have had two assemblies change at random times to a monochrome color and I cannot change them back to their respective colors. I can open sub-assemblies and they show as the correct color but when I close them the main assembly and the recently open sub-assembly go back to monochrome. When placed on a drawing sheet they appear the correct color on the screen and printed in color. The Visual Style is Shaded With Edges.
System:
Intel Core T7700 @ 2.40 GHz
8 GB RAM
250 GB SSD
NVidia Quadro FX 1600M
View 6 Replies
View Related
Aug 5, 2013
In an assembly of a gymnasium divider curtain, I create a path on a 3D sketch which snakes its way upward through a series of grommets. A circular profile is then swept along the path to create a new part - a cable. The cable is its own unique part document and is saved and then vaulted in a job-specific folder. The curtain assembly has several instances of this cable. Everything looks fine until the assembly is closed and later opened for editing. When the assembly is opened, the cables show up in the browser as "Unresolved." Graphically, they have disappeared.
Windows 7 Professional, 64-bit
Inventor 2013 / Vault Collaboration 2013
View 1 Replies
View Related
Nov 16, 2013
I am using Inventor Pro 2014 on Windows 8.1 and when I insert or import a DWG file from AutoCAD into Inventor to extrude it into a solid, nothing shows up. Apparently a wizard is supposed to pop up but when I try it nothing at all happens. I have tried reinstalling it but nothing seems to work. I think importing a DWG into a 2D sketch is a fairly basic thing to do but I'm baffled that it isn't working. I have SP1 already installed.
View 7 Replies
View Related
Jul 25, 2006
I have a problem with Inventor 11 Studio. The reflection on the ground made by "XZ Reflective Gp" works in a way that when rendered, it shows a partial or cut reflection of my assembly, see attached .jpg file. I have not found yet where this "reflection depth" is regulated.
View 9 Replies
View Related
Jan 3, 2014
I can see this brick pattern bump map in my working viewport but when I render an image, it doesn't show up.
View 1 Replies
View Related
Sep 5, 2013
I have a inventor drawing where the text is not visible but shows up on the Print.
View 3 Replies
View Related
Jul 28, 2012
With all the service packs and updates installed 2012 still fails to sometimes recognize frame members properly. Not only is the frame mitre being ignored, the frame was never as long as the idw is showing. It was only as long as the edge. I have spent hours deleting and re-created the frame, views and even completely re-created the drawing but why it's doing this. 2010, 2011 & 2012 have all had frame generator bugs.
View 2 Replies
View Related
Feb 22, 2013
I've got some insulation that is colored white and no matter what white I use or alter the views still show grey. 2011 didn't have this problem as white-flat looked white on screen.
View 1 Replies
View Related
Sep 19, 2012
I have an iassembly with iparts in an .iam file and I went to make a shop drawing of this assembly. When I go to do this, I get my parts list showing all versions of the iparts, even the ones that are not used. It will show a 0 in quantity.
This is under the "structured" view and I do not see a "pars" tab, which is what I've read I need to look for.
I've read that I have to be very careful with the way that I create iassemblies and iparts, How to make a drawing with a BOM that only shows the parts currently in use.
View 1 Replies
View Related
May 2, 2012
I have what is to me a rather large assembly. 1823 total occurrences in the active document and 700 open documents in the session.My problem is that when I open the assembly nothing shows up on the monitor in the image area. The tree is fully populated an showing visibility on all the parts.I have tried saving as a different level of visibility and still no go.
View 9 Replies
View Related
Nov 29, 2011
Trying to do two variations of an assembly using representations. I turned sub-assemblies off in different representations by unchecking "visibility." I can switch back and forth between representations in the assemby and the sub-assemblies go on and off, but drawing views where I've selected a given representation still show the "invisible" assemblies.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
View 6 Replies
View Related
Oct 31, 2012
I have a drawing that I created (.dwg) in Inventor 2013 that, when opened, is completely blank. However, when in the File>Open dialog box, I can click on the name of the drawing and the preview shows the complete drawing with all views fully dimensioned. I closed Inventor, laucned AutoCAD and tried opening the same file and it was still blank (no views). I then closed that file and open the old version of the file from the, "OldVersions" folder with Autocad and all the views and dimensions were there.
So I launced Inventor again and reopened the offending print and noticed that the model is not shown in the drawing's model tree. I'm 100% positive that I did not delete this model/view from the drawing before saving the file. This is a small drawing and it will only take me a few mintues to recreate it.
I'm using Inventor 2013, SP1.1
Windows 7 64 Bit
Dell M6600
Nvidia Quadro 5010M
View 4 Replies
View Related
Oct 1, 2012
Drawing based on .ipn shows (should not show) surfaces used to trim, even their visibility are turned off.
Drawing is normal if based on .iam.
Only one part of the assembly is the problem. Other parts, also with trimming surfaces, are shown normal.
Please see images in .pdf attached.
View 2 Replies
View Related
