Screen does not refresh and shows geometry from one of the viewports to the side, as you pan the window.
Geometry stays on when you go to model space.
Was working ok until Autocad suggested upgrading video performance.
Will not work even after downloading lastest video driver from NVIDIA
Acad 2012
Dell E6530
NVIDIA NVS 5200M
64-bit
In ACAD 2012 if there is two viewport in a layout hatch shows up as solid. I tried the same in ACAD 2011 and everything works ok.
View 4 Replies View RelatedWhy do the dialog boxes and right click menus disappear underneath AutoCAD 2012? It does not happen every time, only most of the time. I can roll the mouse pointer over were the box or menu is supposed to be and some of the buttons and textboxes will reappear but not all.
View 3 Replies View RelatedIt was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
Where can you compare 2 photos side by side in Full Screen in Elements 11? Version 9 has this feature under Display View.
View 1 Replies View RelatedI am trying to see my model space in paper space but nothing is there. tried creating viewports, but they are blank, tried to try different scales, still no joy? tried different layers etc, all layers are on!
This is only happening last couple days but is same for all my drawings. I must have changed a setting or got something very wrong?
how to get my paperspace back!
I have been using various versions of VideoStudio for years to successfully edit videos for courtroom presentations, but this is the first time I have been asked to create a video using two videos playing simultaneously or a side by side image. The first video is a surveillance camera video of a traffic accident, and the second video is a video of a reconstruction of the accident recorded later on the same surveillance system. Even though we can play the videos separately in court, the prosecutor is asking whether or not there is a way to combine both videos into one final product, thereby showing the actual accident side by side with the recreation.
View 2 Replies View RelatedI've got to plot several "half-size" sets of drawings (originally 24x36 drawings) and I am trying to minimize paper waste. I thought there was a way to set the drawings to fit multiple copies side by side but I am at a loss right now.
Civil 3D 2011 Version 2.1
Win 7 x64 SP1
Intel Core i5 3.33 GHz
4 GB RAM
I am trying to invoke AutoCAD 2012 and am gettting the following error: CUsersatillgrenDesktopAutoCAD.exe "The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log or use the command-line sxstrace.exe tool for more detail.
View 2 Replies View RelatedI just started using Photoshop CS3. I've found that when using it occasionally other application windows will stop refreshing properly, and will only sparatically update. Has anyone else encountered this? I'm on Xp Pro with 4GB and dual xeons.
View 1 Replies View RelatedDraw a rectangle, circle, or inport image.
press alt, release
use moiusewheel, mousewheel + shift, and mousewheel + ctrl
the screen blanks out and does not respond. Until you press esc, or click elsewhere on the screen.
There appears to be a bug in CS6 - does this work in any version of Photoshop?
Problem - data sets are not refreshed when contents of the data file are changed, despite clicking "Apply Data Set".
The latest updates are installed, running on Windows 7 Professional, 64-bit, plenty of RAM and available storage. This has never worked before and appears to be a bug in the software. I’ve gone so far as to close PS and even rebooted between steps 4 and 5, same problem. Here's how to recreate it:
1. Create a psd, define variables (I've tried both text and graphic layers)
2. Assign csv file as "Data Set", save the psd
3. Run export, close psd
4. Chage data in csv that was defined as Data Set, save and close csv file
5. Re-open same psd
6. Click "Apply Data Set" - nothing happens
Data is NOT refreshed regardless of whether Data Set 1 or “All data sets” is selected. The only thing that seems to work is to open the PSD and redefine the exact same file as the data set again, then batch export. Because I'd be dealing with volumes of psd files that use volumes of Data Set files that change daily, this isn't feasible.
Defining (or redefining the same file) cannot be recorded in batch mode, nor through the listener (tried previous version just to see).
In coreldraw x4 i needed to refresh a screen (Ctrl + w) after every change in artwork.
I am using macros in corel draw.
Using X6 64 bit on Windows Ultimate. Tables appear blank until a manual screen refresh?
View 4 Replies View RelatedMust have been something I installed earlier in the day or late last night because the way InDesign CC nows redraws the screen is painfully slow. It's true that an Upgrade has been applied this morning through the CreativeCloud panel? I'm on Windows 8.1 running 9.2 x64. This Dell XPS8700 machine has never disappointed. 16 gig of RAM, fast Nvidia video card, 7200 RPM hard drive. It's just zippy! But now, I don't know what could be wrong? I don't have other processes running in the background. I checked to make sure I have the latest drivers for my video card. I tried trashing the Prefs file. The only thing I have not tried is to restart the system?
Other than that, I suppose it's always possible to uninstall and re-install InDesign CC?
How do I get the screen to refresh properly when drawing a line larger than the art board when the screen scrolls? Everything turns white in CS6, CS5 and CS4.
View 12 Replies View RelatedI have been doing some very simple editing of photo's taking a copy from part of one and pasting it as a new layer on another photo. I can then manipulate the size, placement and orientation easily with my X4 version of PSP.
I just purchased the new x6 and am ASTONISHED that this simple exercise doesn't work at all in the 64 bit version and only partially in the 32bit version of x6. What happens is that the screen isn't redrawing the changes as you move the pasted part around. It can be refreshed manually but gets into such a mess when you are trying to place the image that it's unusable. I go back to X4 and using exact same photo's I can work without any problem.
I'm on win7 ultimate all upto date and an 8800 GTS graphics card with latest drivers. There should be no reason x4 works and x6 does not.
My AutoCAD 2012 installation has been doing this for a while, but I don't remember it always doing this:
After I close a drawing (if it is the last drawing open), by using either the "close" command or by clicking the "x" on the window, instead of going to the generic gray-stripe background it just shows what the drawing looked like before close. This keeps messing with my head, as I think AutoCAD has just stopped responding.
If you look closely, though, you can see that the "AutoCAD" and "Autodesk" labels appear on the drawing, but I don't immediately notice this because my drawings are more complex than the sample drawing I've attached.
See images below.
However, when I manually resize the application window (either by restoring or maximizing, or by draging the window edge, the application window refreshes to show the proper generic gray-stripe background.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
I had the properties window docked on the right side of my screen before I reinstalled ACAD LT 2009. Now I can't figure out how to get it back.
View 9 Replies View Relatedsplit screen.cad tutor..jpg
In AC LT 12 can you split the screen and work on one side independently of the other without it also showing up on the opposite side?
How to get the browser back along the left side of the screen.
View 1 Replies View RelatedI have a drawing that I created with acad 2010 that has a pdf xref attached. I just updated to 2013. And now when I go to plot the drawing my xref shows up in preview but doesn't show up on the plot.
I can go back to my 2010 version, and it plots fine. What gives?
When I first installed Photoshop 6, my Workspace was snapped into the right side of the screen; it was attached to that side. Somehow I have managed to pull it off there, and I would really like to put it back, but I can't figure out how. I'm including a screen shot, since I'm sure I'm not describing the problem well at all.
View 5 Replies View RelatedFor some reason, in CS3 I have an opening in the editing space which allows other applications, or the finder, to show through.
How can I grey out that space so it isn't transparent?
When I preview or play a slideshow in Lightroom 5 I see a black screen. I've tried it using various settings, images, lengths, and with the show saved or unsaved, all with the same result. In a preview I can see the show advancing through the slides; all remain black.
Sometimes (unpredictably) the screen isn't black, but rather two colors or color washes separated diagonally.
There are no videos in the shows. (A black screen for a slideshow with a video as the first slide is a known issue mentioned in the Lightroom Journal.)
Exporting to pdf works properly. An exported video shows as a black screen.
(Mac Pro, OS X 10.7.5, Radeon X1900 XT video card)
I have upgrade to 5.2 but still have the same problem whith black screen.
View 1 Replies View RelatedI have some aligned dimensions in model space - they look ok, text is oriented according to WCS. Also I have some viewports with UCS (I used commands UCS, PLAN) where dimensions look wrong, text is not oriented correctly. Is it possible to "update" dimension in viewport to orient text as in model space?
Programmatically created dims in viewports oriented as in model space, not considering current UCS.
My untabbed documents always snap to left side of the screen. I can't center them in the screen. How do I fix this?
View 5 Replies View RelatedIn Photoshop 5.5 I hid the history panel on the right side of the screen. How do I get it back?
View 3 Replies View RelatedI've used Elements for years and just got 11. There are only 8 tools shown on the tool bar (and not move tool). How to I see all the tools on the left side of the screen? Resolution is better than recommended.
View 5 Replies View RelatedI've been using LR since May '13. I originally used LR4, then upgraded to 5 on my iMac. A few days ago when using the Develop Module, the right side of the screen is missing. On the right are the tools and panels for making global and local adjustments to a photo. Gone. I've tried to control-click on develop across the top of the screen.
View 3 Replies View Related