Why do the dialog boxes and right click menus disappear underneath AutoCAD 2012? It does not happen every time, only most of the time. I can roll the mouse pointer over were the box or menu is supposed to be and some of the buttons and textboxes will reappear but not all.
View 3 RepliesScreen does not refresh and shows geometry from one of the viewports to the side, as you pan the window.
Geometry stays on when you go to model space.
Was working ok until Autocad suggested upgrading video performance.
Will not work even after downloading lastest video driver from NVIDIA
Acad 2012
Dell E6530
NVIDIA NVS 5200M
64-bit
I just started using Photoshop CS3. I've found that when using it occasionally other application windows will stop refreshing properly, and will only sparatically update. Has anyone else encountered this? I'm on Xp Pro with 4GB and dual xeons.
View 1 Replies View RelatedDraw a rectangle, circle, or inport image.
press alt, release
use moiusewheel, mousewheel + shift, and mousewheel + ctrl
the screen blanks out and does not respond. Until you press esc, or click elsewhere on the screen.
In coreldraw x4 i needed to refresh a screen (Ctrl + w) after every change in artwork.
I am using macros in corel draw.
Using X6 64 bit on Windows Ultimate. Tables appear blank until a manual screen refresh?
View 4 Replies View RelatedMust have been something I installed earlier in the day or late last night because the way InDesign CC nows redraws the screen is painfully slow. It's true that an Upgrade has been applied this morning through the CreativeCloud panel? I'm on Windows 8.1 running 9.2 x64. This Dell XPS8700 machine has never disappointed. 16 gig of RAM, fast Nvidia video card, 7200 RPM hard drive. It's just zippy! But now, I don't know what could be wrong? I don't have other processes running in the background. I checked to make sure I have the latest drivers for my video card. I tried trashing the Prefs file. The only thing I have not tried is to restart the system?
Â
Other than that, I suppose it's always possible to uninstall and re-install InDesign CC?
How do I get the screen to refresh properly when drawing a line larger than the art board when the screen scrolls? Everything turns white in CS6, CS5 and CS4.
View 12 Replies View RelatedMy AutoCAD 2012 installation has been doing this for a while, but I don't remember it always doing this:
After I close a drawing (if it is the last drawing open), by using either the "close" command or by clicking the "x" on the window, instead of going to the generic gray-stripe background it just shows what the drawing looked like before close. This keeps messing with my head, as I think AutoCAD has just stopped responding.
If you look closely, though, you can see that the "AutoCAD" and "Autodesk" labels appear on the drawing, but I don't immediately notice this because my drawings are more complex than the sample drawing I've attached.
See images below.
However, when I manually resize the application window (either by restoring or maximizing, or by draging the window edge, the application window refreshes to show the proper generic gray-stripe background.
System specifications: AutoCAD 2014 64-bit SP1, Windows 7 64-bit SP1, Intel Core i7-2600K, AMD FirePro V4900
16GB RAM, Crucial M4 SSD, 3 Dell Monitors (2 30" 2560x1600 & 1 20" 1200x1600)
When I want to edit the annotation scale of an object, the dialog box seems to open, but I cannot see it. I copied my profile from my computer with two monitors, so I suspect that is the problem. I tried Alt + down arrow, then right and left arrows to see if I could find it, but that did not work. CMDDIA is 1.
View 1 Replies View RelatedI have a dual screen set up. I left work last night with no problems. I fired up my PC this morning and all of a sudden all of my dialog boxes appear on my second screen. I have disconnected the second screen and all the boxes return to normal. Plug the second screen back in and the dialog boxes go back to the second screen.
View 5 Replies View RelatedI loaded autocad R2013 and went into the .cui dialog box to look for the screen menu section. It used to be under the legacy portion but it's no longer there. I've been looking all around to try and find where it's at.
View 4 Replies View RelatedSometime the ViewCube disappear from my screen, so it is not possible to rotate my drawing so see my objects in 3D.
The same ViewCube is in my Viewport and in this case I would like to make it disappear due the Viewport is locked and the commands do not operate normally here in this area.
Just in case you do not know what is the ViewCube please check the images attached.
If I double click a workplane in the browser, the edit dimension dialog comes up half way off screen, does not remember the screen position if I move it, so it has to be repositioned every time. Seems to be tied to the browser position.
View 9 Replies View RelatedNormally I use two monitors, but I'm travelling. Because I last placed the extrude box on my other monitor I can no longer get access to it on the only screen I have left. Normally, as with any window, you could hit Alt+Space and M but....the blasted mini-toolbar takes focus first!! It seems that all the other menus don't have this, only extrude. Is there any way to reset menus when disconnecting? There really should be. I'd say that the program ought to know that there is only one monitor connected and respond accordingly.
W7-64, all up to date
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
Just upgrade my system to Vistax64 and installed my CS3 on here and its working great. There is however a strange thing going on with my palettes UI and it disappearing. I was just testing it out after the install (which installed fine) and have been using it now for about two weeks. I did try searching all over Google and stuff like that to see if anyone else ran into this issue but didn't really find anything useful. Attached are some screen shots so you can see what I'm talking about. As you can see, that is actually my Layers Palette has no top border, heading, nor tabs. It's just blank. If I click onto it, it will collapse (minimize) and everything will show up again (tabs, buttons to close the palette, etc) If i click on it again, then it'll just expand like it should look. It no only does this with the layers palette but with all the windows docked to the right side if expanded out. (not sure if I'm making any sense, pictures tell the whole story) I'm running Vista Ult 64bit, 8 GB Ram and 3.5 Ghz quadcore processor. It works and runs fine, this just happens every once in a while and its very annoying. Also happens in dreamweaver, flash, and illustrator. I did reinstall photoshop twice just to make sure that it just wasn't a faulty install but it works and works well. Just besides this UI bug. Drivers have been updated for my gtx260 card, all hardware drivers are good.
View 9 Replies View Relatedok my question is, when i save my work the Save Window pops up but is half way off the screen. i can't press the OK Button to save because that half is off the sceen.
How can i bring down the Save Menu so I can press OK BUTTON to save my work.
Dialog boxes are appearing in various different places rather than a central location on the screen...
Â
For example: the Save dialog appears half off screen towards the lower right section of the display. Various other boxes appear in the top left, upper right. All dialog boxes are moveable, so i can reposition them to the middle but the next time i used appear where they were, not centrally.
Â
I work both on a 13" macook pro seperately and with and a 27" apple display attached. Dialog boxes are visiable on the 27" display but often in odd places.
Â
Is there any way i can reset their position? I have tried reseting all dialogs, trashed the preferences in the preferences in the library folder on the computer but no luck. I am puzzled.
I am using two screens and moving Illustrator to the larger screen from my laptop so that I can see things better. I am still using CS2. One day for reasons I still do not understand, my PDF dialog box disappeared. Illustrator thinks it is there, but the only thing I can do is escape out of it. I can't save a file as a PDF, and I need to do that on a regular basis. I even tried uninstalling and reinstalling CS2, but it did not change anything.
Â
How to retrieve a dialog box that has gone off the screens?
I've never asked about this but I've succeeded in doing this many times over the years. I have this habit of flying through my keystrokes and sometimes hit a key or a series of keys causing the entire Tool bar and Window presets to disappear.Â
Until now, I've reset each window to show my actions, history, etc. and re click on Tools in the Window scroll to have them show up again. The question is two-pronged: What am I accidentally hitting on my keyboard to make all these disappear at once and is there a keystroke I can use to bring them all up again?
Just installed AutoCad 2012 and I have the Property Dailog Box open. I anchor it to the left side of the drawing screen and "Lock" all toolbars in place. When I get out and go back into Autocad, the dailog box is still locked, but it is in the middle of the drawing screen.
View 3 Replies View RelatedWhat command turns off the annoying "selection dialog box"? I don't know if it's new or not, but it started showing up this week. I see the purpose, but don't like it or the fact that autocad makes difficult to turn off a feature after it puts it there without warning. Attached is a screen shot of it.
View 2 Replies View RelatedThe following happened in LR4, I installed RC2 hoping it may cure it but problem remains:
Â
Photos in whatever module cannot dispaly images after having worked properly for a while in any module no image display but grey rectangles... asking for "display in the explorer" shows in superposition that images are ther...
catalogue seems ok (structure and all, metadata are ok, in the development module memory has been kept of photos adjustment...
Â
Re-opening catalog or optimizing does not have any effect....
Â
Quiting LR is just abrupt with no asking for back-up...
Anytime I try to add a custom scale either by selecting the "custom scale" option from the paperspace viewport scale menu or by entering the command SCALELISTEDIT manually, the dialog box doesn't appear.Â
It's not that the box isn't opening because all other buttons and functionality are restricted in AutoCAD until I hit escape to exit out of the command. It's as if it's opening on a separate monitor, except it doesn't appear on my secondary monitor when I plug it in either.
Is there a command where I can manually add a custom scale or a property that I can change to force the box to be docked?
My AutoCAD has started doing something different, I don't remember turning it on, and now I can't figure out how to turn it off.
What happens is when I hover the mouse near two or more objects a little blue box icon appears telling me that there is multiple objects there. Then, if I click, it asks me which object I want to select. URL....
When opening AutoCAD 2010, I get an error message "Unable to load profile...". This happened unexplicably. I have been using AutoCAD several months with no problems. One annoying consequence is that dialog boxes do not display. For example, running DIMSTYLE does not open the Dimension Style dialog box; instead, a list of options such as ANnotative, Save, and Restore appears. How do I get back to normal?
View 1 Replies View RelatedI'm having a problem that my file dialog box won't open when I go to open, new or save as. When I hit open, new or save as the command bar wants you to type the file name. My co-worker told me to type CMDDIA and change it to 1. But that didn't work for my error. How to fix my AutoCAD issue. I attached a .jpg of what the command bar looks like when I hit the open button.
View 2 Replies View RelatedHow to get rid of this warning dialog:
It appears at startup. I recently installed software (Simtra PathPlanner) that works with AutoCAD that may have caused this.
Using AutoCAD 2012 on Windows 7 64-bit.
I started having this problem today: Whenever I try to insert a block (either from the command line or the pull-down menu), the dialog box appears for a fraction of a second and immediately vanishes. There are no options on the command line after this, and the main window loses focus. At first I thought it was somehow ending up behind the main window, but that's not the case. Hitting escape brings focus back and the program runs fine otherwise until I try and use the insert command again.
I installed the SP1 update earlier today, but this problem didn't start happening until hours after that. I then tried to do a fresh install, and the problem was still there before I reinstalled SP1, so I don't think that's the problem.
This first starting happening after creating a block, the same way I always do, but I don't see what I could've done. This problem isn't limited to a specific drawing of mine, it happens with all my files as well as new ones.
The Layers, Channels, Paths Dialog Window doesn't appear on my screen. Have tried everything I can think of.
View 2 Replies View RelatedThe Layers, Channels, Paths Dialog Window doesn't appear on my screen.
View 1 Replies View Related