ok my question is, when i save my work the Save Window pops up but is half way off the screen. i can't press the OK Button to save because that half is off the sceen.
How can i bring down the Save Menu so I can press OK BUTTON to save my work.
Dialog boxes are appearing in various different places rather than a central location on the screen...
For example: the Save dialog appears half off screen towards the lower right section of the display. Various other boxes appear in the top left, upper right. All dialog boxes are moveable, so i can reposition them to the middle but the next time i used appear where they were, not centrally.
I work both on a 13" macook pro seperately and with and a 27" apple display attached. Dialog boxes are visiable on the 27" display but often in odd places.
Is there any way i can reset their position? I have tried reseting all dialogs, trashed the preferences in the preferences in the library folder on the computer but no luck. I am puzzled.
I am using two screens and moving Illustrator to the larger screen from my laptop so that I can see things better. I am still using CS2. One day for reasons I still do not understand, my PDF dialog box disappeared. Illustrator thinks it is there, but the only thing I can do is escape out of it. I can't save a file as a PDF, and I need to do that on a regular basis. I even tried uninstalling and reinstalling CS2, but it did not change anything.
How to retrieve a dialog box that has gone off the screens?
When I want to edit the annotation scale of an object, the dialog box seems to open, but I cannot see it. I copied my profile from my computer with two monitors, so I suspect that is the problem. I tried Alt + down arrow, then right and left arrows to see if I could find it, but that did not work. CMDDIA is 1.
View 1 Replies View RelatedI have a dual screen set up. I left work last night with no problems. I fired up my PC this morning and all of a sudden all of my dialog boxes appear on my second screen. I have disconnected the second screen and all the boxes return to normal. Plug the second screen back in and the dialog boxes go back to the second screen.
View 5 Replies View RelatedI loaded autocad R2013 and went into the .cui dialog box to look for the screen menu section. It used to be under the legacy portion but it's no longer there. I've been looking all around to try and find where it's at.
View 4 Replies View RelatedWhy do the dialog boxes and right click menus disappear underneath AutoCAD 2012? It does not happen every time, only most of the time. I can roll the mouse pointer over were the box or menu is supposed to be and some of the buttons and textboxes will reappear but not all.
View 3 Replies View RelatedIf I double click a workplane in the browser, the edit dimension dialog comes up half way off screen, does not remember the screen position if I move it, so it has to be repositioned every time. Seems to be tied to the browser position.
View 9 Replies View RelatedNormally I use two monitors, but I'm travelling. Because I last placed the extrude box on my other monitor I can no longer get access to it on the only screen I have left. Normally, as with any window, you could hit Alt+Space and M but....the blasted mini-toolbar takes focus first!! It seems that all the other menus don't have this, only extrude. Is there any way to reset menus when disconnecting? There really should be. I'd say that the program ought to know that there is only one monitor connected and respond accordingly.
W7-64, all up to date
Inventor Professional 2014
Windows 7, x64
Dual-core i7, 8GB RAM
NVIDIA Quadro FX 880M
HP Elitebook 8540w
The Layers, Channels, Paths Dialog Window doesn't appear on my screen. Have tried everything I can think of.
View 2 Replies View RelatedThe Layers, Channels, Paths Dialog Window doesn't appear on my screen.
View 1 Replies View RelatedI'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I have used "Share My Screen" meeting feature a few times on my machine.
a client and it gave me the blue screen of death crash and forced a restart. After it did this 3 times I gave up.
Windows XP Home 2002 SP3
PhotoshopCS4 Extended
CS4 Production Premium
RADEON X300 SE 128MB Hypermemory
Intel Pentium (R) CPU 3.00 GHz 2.99 Ghz
2.50 GB RAM
Model Space Screen Darkens and am unable to see screen
View 2 Replies View RelatedHow do i stop the screen from moving when I drag something to the edge of the screen?
View 1 Replies View RelatedI would like to change this title screen to english title screen at the precisely same picture on below but I want it to be in english title screen.
View 9 Replies View RelatedSetup: Designer Pro 7 on win 7 (64bit)
Trying to use the builtin screen capture tools under Utilities/Screen capture.
There appears to be no way to do a selected capture or partial selection of parts of a window. Instead we have:
Full screen []
active window []
content of active window [x]
So I selected the last one above as shown `Content of Active Window'
But what I actually get is a mini version of the entire Designer pro 7 application Including the menus, borders, and all that guff that no one usually wants in a capture of part of the full screen.
So what does `Content of active window' mean as apposed to `Active window'?
Its really unbelievable that there is no provision like `Region' found in most screen grab tools where you select with the mouse what you want captured.
Maybe I'm just missing how to use this thing, but have included the result of what a `content of active window' does. Its a mini version of the entire application...
I did take a class for it in college so I know the basics, but still learning. I am trying to create a very basic animation where I have 2 assets that begin off the stage on either side. I would like the elements to slide in from the sides and meet in the middle with about a 20px overlap. I tried setting a keyframe for both elements at 0 seconds and setting the X translations to -2000px and 2000px and then setting another keyframe at 5 seconds and changing the X translations to 48% and 52% respectively. This got me the desired effect, but only because I have such a large monitor. If the browser window is resized or the screen is smaller, the effect does not stay the same due to using percentages to center the elements.
is there a way to animate elements to the middle of the screen without percentages(maybe by using margin:0 auto or something)? Or is there a way to accomplish what I am looking for so that the positioning of the elements is the same regardless of browser window size?
I am using Photoshop CS5 and when I save for the web, my saves are extremely contrasty. When I save normally they are fine. I have tried every setting I can find in the Save for Web dialog box.
View 1 Replies View Relatedthe Print Dialog simply will not show up so I can adjust the ICC profiles etc.I have CS6 Upgrade installed (upgraded from CS5) and running on a Windows 8 PC.
View 8 Replies View RelatedAll of a sudden my print dialog/preview box is not showing in my PS CS6. Everytime I try to print I get an error message saying: There was an error opening your printer. Printing functions will not be available until you have selected a printer and re-opened document.
I see no place to pick a printer as there is no longer a dialog box. All other programs on my network have no problem with choosing a network printer.
I've a question regarding the Print dialog that states "Needs Calibration" just below the drop down for selecting printers. The selected printer is a HP Photosmart C7180 and PS CS5.5.
What calibration PS is refering to? I've tried the built in pen and color adjustment on the printer but that operation does not seems to be of interest by PS.
I already registered, but the register dialog comes up everytime I run photoshop.
Clicking do not register doesn't help. Next time I start photoshop the same dialog comes up again.
How do I get rid of this?
CS2 on vista
I remember back in CS3 we had the option to use the Adobe dialog for Saving and Opening files. On CS4 I don't have this feature anymore. Was it included or do I need to change a setting?
View 11 Replies View RelatedI have tried to create Actions that involve creating a new file for use as a displacement map. When you copy your original then hit cmd+N (ctrl+N in his case), the NEW picture dialog comes up with the size of the new document preset to be the same size as the picture in the clipboard.
The problem is that the Action records that size as the new document size, instead of getting a new value from the clipboard every time. That creates problems when running the action on a cropped or non-standard sized originals. The 'NEW' dialog box should include, in addition to the many preset sizes, a CLIPBOARD option that would be scriptable.
If I open Photoshop CS3 I am able to drag an image from a Windows Vista folder into the Photoshop window and the image opens in Photoshop.
If I go into the open Dialog Box within Photoshop and select an Image I cannot drag the image into the main Photoshop window I must click on the "open" button.
I have a photographer friend who says he use to be able to work this way and for some reason it no longer works. I suspect he is wrong.
Is this normal or is something not working correctly.
In insert my disc in the drive and the dialog box does NOT appear.
View 2 Replies View Related3D problem. When trying to initiate a 3D function in Photoshop CC all I get is the preferences dialog box. Nothing appears to be out of place in the prefs, OpenCL is active as is the GPU. My system is Windows 7, i7 6 core CPU, dual GeForce GTX590 GPUs (3gb of ram each) and 32gb of system ram. Scratch disk has more than 500gb of free space.
View 1 Replies View RelatedToday, after accidentally exporting a file as a TIFF the options dialog box for TGA files no longer appears.
Which means my workflow has come to an absolute and complete stop since I can no longer export proper 32-bit TGA files that are required for import into other software.
I've deleted all the preferences inside ~/Library/Preferences though that did not fix it.
I use CS6 on a system that utilities two monitors. To maximize the amount of screen on Monitor 1 used for viewing my photos, I have arranged the workspace so that my history, actions and other panels are on Monitor 2.
However, whenever I open a window, for example Image->Adjustments, it always opens the window or dialog/settings box on Monitor 1, over the top of the photo that I'm trying to edit. I then have to drag the window across to Monitor 2 manually before making the necessary adjustments.
Upon shutting down the window and then performing another adjustment, the new window doesn't 'remember' that I had last shut it down on Monitor 2, and it opens on Monitor 1 again.
Is there any way of getting CS6 to open these windows and dialog boxes on Monitor 2 by default?
Whenever I save something as a PNG, Photoshop asks if I want to save it in interlaced format. Is there a way to set a default for that so it doesn't ask me every flippin' time?
View 4 Replies View Related