AutoCAD 2010 :: Dialog Box Vanishes Immediately?
Apr 2, 2012
I started having this problem today: Whenever I try to insert a block (either from the command line or the pull-down menu), the dialog box appears for a fraction of a second and immediately vanishes. There are no options on the command line after this, and the main window loses focus. At first I thought it was somehow ending up behind the main window, but that's not the case. Hitting escape brings focus back and the program runs fine otherwise until I try and use the insert command again.
I installed the SP1 update earlier today, but this problem didn't start happening until hours after that. I then tried to do a fresh install, and the problem was still there before I reinstalled SP1, so I don't think that's the problem.
This first starting happening after creating a block, the same way I always do, but I don't see what I could've done. This problem isn't limited to a specific drawing of mine, it happens with all my files as well as new ones.
View 1 Replies
ADVERTISEMENT
Oct 4, 2010
I am having a problem with AutoCAD crashing without fully loading. I will get the splash screen and the application background will momentarily appear with "AutoCAD 2011" in the title bar then it will all disappear with no visible error message. By checking ACD2011ENUAdlm.log in C:Documents and SettingsAll UsersApplication DataAutodeskAdlm I get the following error message:
3536 2010/10/04 10:05:39 Reason=Fatal error
View 9 Replies
View Related
May 1, 2011
I'm be battling this all day and can't work it out. I've got a drawing and title block and a table with text on my model space. When i create viewports etc and try and sort out the layout, the text in the title block and key disappears.
View 9 Replies
View Related
Apr 16, 2013
Problem: occasionally when I copy an object (text, polylines, blocks etc) and then paste, it appears as though nothing has happened. However the object is copied, it is simply not visible. If I then regen all entities also vanish. I can save and reopen the drawing this fixes the issue. For me this is fine, but it is happening to others multiple times in one day.
View 5 Replies
View Related
Apr 18, 2013
Just installed AutoCad 2012 and I have the Property Dailog Box open. I anchor it to the left side of the drawing screen and "Lock" all toolbars in place. When I get out and go back into Autocad, the dailog box is still locked, but it is in the middle of the drawing screen.
View 3 Replies
View Related
Feb 14, 2012
What command turns off the annoying "selection dialog box"? I don't know if it's new or not, but it started showing up this week. I see the purpose, but don't like it or the fact that autocad makes difficult to turn off a feature after it puts it there without warning. Attached is a screen shot of it.
View 2 Replies
View Related
May 19, 2011
Anytime I try to add a custom scale either by selecting the "custom scale" option from the paperspace viewport scale menu or by entering the command SCALELISTEDIT manually, the dialog box doesn't appear.
It's not that the box isn't opening because all other buttons and functionality are restricted in AutoCAD until I hit escape to exit out of the command. It's as if it's opening on a separate monitor, except it doesn't appear on my secondary monitor when I plug it in either.
Is there a command where I can manually add a custom scale or a property that I can change to force the box to be docked?
View 9 Replies
View Related
Jan 11, 2011
My AutoCAD has started doing something different, I don't remember turning it on, and now I can't figure out how to turn it off.
What happens is when I hover the mouse near two or more objects a little blue box icon appears telling me that there is multiple objects there. Then, if I click, it asks me which object I want to select. URL....
View 3 Replies
View Related
Feb 27, 2012
When opening AutoCAD 2010, I get an error message "Unable to load profile...". This happened unexplicably. I have been using AutoCAD several months with no problems. One annoying consequence is that dialog boxes do not display. For example, running DIMSTYLE does not open the Dimension Style dialog box; instead, a list of options such as ANnotative, Save, and Restore appears. How do I get back to normal?
View 1 Replies
View Related
Sep 18, 2012
I'm having a problem that my file dialog box won't open when I go to open, new or save as. When I hit open, new or save as the command bar wants you to type the file name. My co-worker told me to type CMDDIA and change it to 1. But that didn't work for my error. How to fix my AutoCAD issue. I attached a .jpg of what the command bar looks like when I hit the open button.
View 2 Replies
View Related
Dec 22, 2012
How to get rid of this warning dialog:
It appears at startup. I recently installed software (Simtra PathPlanner) that works with AutoCAD that may have caused this.
Using AutoCAD 2012 on Windows 7 64-bit.
View 7 Replies
View Related
Oct 17, 2012
How could I be bringing up the Rename Dialog Box when I am in the Layer Dialog Box creating new layers? It seems to happen from now and again mostly when I go to change the color of the new layer. This shouldn't be an issue but once the box comes up, all my work inside the layer dialog box will be lost when I close it and reopen it.
Doesn't matter if I pick "OK" "CLOSE" or the "X" in the upper right hand corner of the box. Rename command, just what I hit, strike or click that brings it up and hopefully a means to change my CUI so I don't do it anymore.
View 3 Replies
View Related
May 1, 2013
I'm new to AutoCAD 2011 (from AutoCAD-14). Is it possible to make the properties dialog box function like it did in AutoCAD-14?If not, can I remove some of the items in the properties dialog box.
View 2 Replies
View Related
Mar 19, 2013
I am difficulty getting the options dialog box to open (under the file menu "red A" dropdown list, options button). When I click on it, all of the buttons on top go gray and nothing appears. When I click on the black workspace, I get a compluter bell sound.
What I've tried to do to solve the problem is restart the computer and shutdown the computer.
View 2 Replies
View Related
Mar 9, 2012
I have several lisp routines I have been using since Acad 2002 (with occasional minor revisions) for my title blocks that open up a dialog boxes. None of the lisps I have that should open up a dialog box are working in a fresh 2012 install.
The lisps work in 2010 but not in 2012. I searched through the boards and found some info but it hasn't worked (made sure ATTREQ & ATTDIA set to 1).
Here is one the lisps in question:
(defun c:title(/ archl sqftl filel datel salel namel builderl planl subdivision1l subdivision2l plana planb year month day rb1 rb2 rb3 insp1)
(setvar "cmdecho" 1)
(command "attdia" "0")
(command "-osnap" "none")
(setq dcl_id (load_dialog "tools.dcl"))
[code]...........
I have tried changing the attdia value to 1 in the lisp but the result is the same. The command fails at the same spot:
Command: TITLE attdia Enter new value for ATTDIA <1>: 0
Command: -osnap Enter list of object snap modes: none
Command: nil
If I use -insert I can get the blocks to run by typing all the information at the command line but I want my dialog boxes back!
View 3 Replies
View Related
May 13, 2013
If I open the drawing and then run the publish command the Status shows "No errors". If the file is not opened and I use the add sheets button to add the exact same file, it shows an error in the Status of "Layout not initialized".
View 3 Replies
View Related
May 30, 2012
I used to be able to save as and browse to the file where I want to sane or open a file
Now I get a dialog box where I can only save to the default location or manually enter the path and file name
Same with opening a file - I go file open and it is gives a path to the last file I used. There is option to browse - how I get this back to the normal function of open/save by browsing?
View 2 Replies
View Related
Jan 27, 2012
My symbols dialog box show letters, I need it to show symbols. How to I fit this?
View 2 Replies
View Related
May 29, 2012
This is an annoying change from acad 2007 to acad 2011. Every time I start and end the Mtext command, as the dialog box opens and closes, the screen "shudders", or "jumps" a little. It is hard on my eyes. I have explored the MTEXTFIXED and the MTEXTED commands, but I can't get it to settle down.
View 1 Replies
View Related
Mar 25, 2012
In previous version of AutoCAd 2008 (or earlier) the images dialog to edit the images (i.e., brightness, sharpness, etc, it has been a long time and I forgot what they were, but they were there and with many options) was obvious, versatile, and very easily found then, but I could not find it in AutoCAD 2012.
how to get it in AutoCAD 2012?
View 1 Replies
View Related
Feb 8, 2012
Why do the dialog boxes and right click menus disappear underneath AutoCAD 2012? It does not happen every time, only most of the time. I can roll the mouse pointer over were the box or menu is supposed to be and some of the buttons and textboxes will reappear but not all.
View 3 Replies
View Related
May 3, 2012
I cannot get dialog boxes for purge, xref, etc. I only get the command line.
I made sure filedia=1 and cmddia=1.
The tilde ~ key will not bring up the dialog box from the command line.
View 9 Replies
View Related
Feb 17, 2012
In AutoCAD Architecture 2012 (AutoCAD 2012) I want “Entire drawing” selected by default in “Find where:” in “Find and Replace Dialog Box” instead of “Current space/layout”.
View 1 Replies
View Related
May 27, 2011
I have a user that can't move or resize his xref dialog box. He is using dual monitors and has no problem with any other dialog box. I've tried changing settings for docking/hide.
View 2 Replies
View Related
Nov 5, 2013
Is there are way to make the size of this dynamic, So you can drag it wider and taller, There are other boxes that seem to be frozen in size. I use this with many custom fields and it's difficult to enter data when you see what your doing.
View 2 Replies
View Related
Jul 23, 2012
my "block editor settings" dialog box won't show up wether i try to access it via command line, options, or the block editor. everything else disables like it should be running..... but no dialog box?
I'm running autocad 2012.
View 2 Replies
View Related
Nov 16, 2010
In the save as dialog box, the button for creating a new folder will automatically create a named "new folder" at the bottom of the files list. It does not come up highlighted for naming but can be right-clicked, renamed. If your files list is long you won't even see the new folder created as it does not snap to the folder either. Conversely; I can still right-click, new, folder. This acts as expected which creates folder at the top of files list, highlighted for naming.
View 6 Replies
View Related
Sep 18, 2013
when I invoke the Revcloud command and type "O" for options, I get a message box that says "Unable to open dialog box", if I close that message box I'm able to draw cloud lines in my drawing but I have no control of the cloud since I can not access the options dialog box.
My Revcloud was working fine last week.
why I'm getting the "Unable to open dialog box" message?
View 3 Replies
View Related
Sep 6, 2012
How do I turn on the dialog boxes when I enter commands? I finally found HPDLGMODE for the hatch command, but I would like it for all commands, especially array.
I have my FILEDIA set to 1.
View 1 Replies
View Related
Jun 12, 2012
My issue is with the Publish dialogue. I am publishing several sheets to PDF. I do not want layers to be available in the PDF. I shoud be able to control whether or not layers export with the PDF in the "Publish dialogue box > Publish Options > General DWF/PDF options > Layer Information" (then there are two options, either to include or not include layer information). However, when I change it to "don't include" and close out of that box, the main Publish dialogue still shows the layer option as included and the layers are in the PDF after I publish it. why the layers still show up?
View 2 Replies
View Related
Sep 10, 2012
It used to be that when you selected a ployline onscreen you could set properties for the line in the properties dialog. With this version of ACAD, if the polyline is not of uniform width on all sections then the global width option is missing from the options dialog.
I know that you can now right click and go polyline/width but i suppose i have been doing this a certain way for so long and now i cant and its annoying.
View 5 Replies
View Related
