I'm be battling this all day and can't work it out. I've got a drawing and title block and a table with text on my model space. When i create viewports etc and try and sort out the layout, the text in the title block and key disappears.
View 9 RepliesProblem: occasionally when I copy an object (text, polylines, blocks etc) and then paste, it appears as though nothing has happened. However the object is copied, it is simply not visible. If I then regen all entities also vanish. I can save and reopen the drawing this fixes the issue. For me this is fine, but it is happening to others multiple times in one day.
View 5 Replies View RelatedI started having this problem today: Whenever I try to insert a block (either from the command line or the pull-down menu), the dialog box appears for a fraction of a second and immediately vanishes. There are no options on the command line after this, and the main window loses focus. At first I thought it was somehow ending up behind the main window, but that's not the case. Hitting escape brings focus back and the program runs fine otherwise until I try and use the insert command again.
I installed the SP1 update earlier today, but this problem didn't start happening until hours after that. I then tried to do a fresh install, and the problem was still there before I reinstalled SP1, so I don't think that's the problem.
This first starting happening after creating a block, the same way I always do, but I don't see what I could've done. This problem isn't limited to a specific drawing of mine, it happens with all my files as well as new ones.
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
in ps my text looks fine,. but when i go to preview for plotting its rotated 90 deg.
View 1 Replies View RelatedAutoCAD 2012
Border lines print okay but zone numbers/letters get cut off. This should be A on the right and 1 on the bottom
Prints to printer okay but print to pdf is messed up.
If I move one of the text boxes lower or to theright, that box gets cut off but the rest then print okay.
I have a problem with plotting 3D drawings. I have certain perameters I have to follow!
1. I have to use our company standard CTB files because our plots include 2D drawings that use color to define line thickness.
2. I have to use viewports, we use "carrier" sheets (paper space) to hold xrefs of all details, plans, etc...
3. I have to use Arial font and filled arrows.
The proceedure I use - I create 3D solids, then rotate them to the view I prefere (typically an isometric view), then I put text with arrows etc.. in. Once the Isometric (3D) is done I xref it into the model space of my "carrier" sheet. I then create a viewport and set it to plot "Legacy Hidden" as this allows me to plot the drawing to the correct line weights and so on using our CTB files.
The problem is that when I use the "Legacy Hidden" setting, all of the text, arrows, polylines and hatch are not filled. I have tried all of the other settings for plotting and they just do not do what I need - Hidden plots as a color image and on the black and white plotter is gray and not black, others give unsatisfactory results as well!
I have found a workaround but that won't cut it with our CAD committee, I am tring to get them to "allow" us to use 3D as a proper way to do isometrics and perspectives. This is my drawback!
One work around uses 2 viewports (one a copy of the other with the plot settings changed and the layers turned off/on then place one directly over the other to properly plot), the second is more reasonable but I have not tried it yet, it would involve creating a 3D drawing, then xrefing it into another drawing file that would contain the viewport and all of the text, polylines and so on).
I have a table which is linked to a datalink from Excel. The table and contents (text) show up in paperspace; however, only the table frame shows up within the plot preview, or when I try to plot it. The text does not show up.
View 4 Replies View Relatedhow to get line weights defined through Inventor? After printing or output to PDF I can barely read the dimensions. Is this with the drawing setup? or with the printers?
View 1 Replies View RelatedI have some very strange problems printing from Autocad. Some of the text is missing. The printer used is a HP9500. If I use a PDF driver to print to file, then print from the PDF file, it's ok, the text is showed, but printing directly from autocad has been resulting in this type of issue.
I checked the layers, and they are ok. The fonts are ok. It's not printing some text "near the viewport" borders. It was what I could conclude.
When Im in model mode mode I create txt to annotate my diamentions, when I sent up my page in paper mode and plot it to a pdf, all the text ive created in model mode appears on the pdf as outlined text ( hollow ).
View 1 Replies View RelatedHow to configure autocad 2008 to treat the .SHX fonts as "text" and not as "graphics" when plotting in PDF?
Using the plotter configuration editor, you can treat True Type fonts as "text" or "graphics". How about .shx fonts? My goal is to plot drawings (containing .shx fonts) in PDF whose text are content readable.
My problem is that all of my dimensions and text have changed colour to white, with my by layer colour as an outline of the text, the arrows and lines still look correct however. I put the dimensions on a seperate layer and this seemed to happen after hiding this layer then later unhiding it. I have looked through the properties to change the colour unsuccessfully.
On another note, the monochrome print option does not work when creating a plot - it will still create it in colour. What can I do to sort these issues? It is fustrating as all I really need to do with this drawing is to export the it for a report and it looks messy!
I'm having trouble with paper space labels. When i zoom in and out to adjust my viewport, the scale looks fine. Then when i go to plot preview all text are enlarged. Then when I cancel I go to paperspace and labels remain large.
View 9 Replies View RelatedWhen printing a paper space viewport in Conceptual Visual Style mode, text objects are visible in the print preview but not in the printout on paper. Why are they not hidden in the preview if they are not going to be printed?
View 2 Replies View RelatedI’m trying to create a plot command that reads settings in from a variable stored in a text file but its becoming muddled up somewhere.
(defun c:MYPLOT ();Setting nessesary variables...(setq fname "C:/ICT/AutoCAD_Architecture_Suite_2012/CUSTOM/TREADSTONE/PEN/MYOUTPUTDEVICE.PEN")(if(setq f(open fname "r"))(while (setq MYOUTPUTDEVICE (read-line f))(close)))(setq fname "C:/ICT/AutoCAD_Architecture_Suite_2012/CUSTOM/TREADSTONE/PEN/MYPAPERSIZE.PEN")
[code].......
I am a Mac user and new to AutoCAD. I am enrolled in a CAD class this semester and the instructor for my session is requiring Windows. Supposedly this is because AutoCAD for Mac does not allow for proper printing on their plot style setting.
I understand that I can install Bootcamp and Windows on my computer, but I'd really like to avoid that if I can. If I were to do my work on my Mac and then digitally transfer my files to a PC for printing purposes, would my files become corrupted or compromised in any way?
Where else do they keep this setting? I only have found it in Active Layout in extended dada
(entget (vlax-vla-object->ename(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object)))) '("*"))
The last pice of extended data is:
("PLOTTRANSPARENCY" (1071 . 0))
When i change it to 1
(setq layout(vla-get-activelayout (vla-get-activedocument(vlax-get-acad-object))))
(vla-getXdata layout "PLOTTRANSPARENCY" 'type 'data)
(vlax-safearray-fill data '("PLOTTRANSPARENCY" 1))
(vla-setXdata layout type data)
it stays there (extended data), but the setting in Plot dialog box doesn't change!!! And it still prints no transparency.
It takes to save the drawing and reopen it again to see the change.
The command -PLOT does not have this setting as well, so my options back to VBA or Lisp, but HOW?
I have a problem to plot thin lines and dots when Plot Transparency option is On in the Plot dialog box.
The lineweight is a half of the original. I think i have tried everything.
It shows correctly in the Plot Preview but when printed there are no dotted hatches and lines are much thinner.
Can users with a 64 bit computer share pc3's and pmp's with 32 bit users without adverse effects?
View 1 Replies View RelatedWhen I publish a drawing as a multipage DWFx (or PDF for that matter) with "Include Layer Information" selected, the Plot Stamp (Simple Date/Time and Text) comes out but on different layers on different layouts.
Example:
First Layout : Plotstamp resides on Layer 0
Second Layout: Plotstamp resides on Layer 3P
Third Layout: EQPT-VC
etc
Some general information:
Autodesk AutoCAD 2011 64bit
Autodesk DesignReview - 2012
Adobe Acrobat X Professional
Layer 0 Is thawed/plotable and on in all layouts, viewports all layers, viewports. It has at least one entity per layout
Is there anyway to rectify this and still use the built-in Plot Stamp?
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
I have found that when I Publish, the drawing comes out shifted about 1/8" down and 1/8" left as compared to when I use Plot. Which of course is just enough to cut off the sheet border which is 1/2" from the paper edge. I am using the same Page Setup for both Publish and Plot, same drawing.
This is to an Oce TDS600, and it only happens with 15x21 paper size. All paper sizes are set to 0" border. Probably an Oce issue, but have any of you seen this before?
I recently upgraded from 2010 to 2012 and when trying to plot, using the very same page setups as before the upgrade, the quality (or resolution) of the plot is very poor and pixelated. I am using very high resolution aerial imagery. The output is not at all high resolution (totally pixelated, not presentable as professional). It seems like AutoCAD is reducing the image quality now. Is this a system variable that can be adjusted?
View 1 Replies View RelatedI have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
I am aware of the plot stamp available in the Plot Dialog box, however, we are looking at ways to imbed this info in the dwg. I currently have the WD_TB with an attribute for FULLFILENAME, an attribute for PLOT DATE, and an attribute for PLOT TIME12. So I get the information on the dwg. I would like to be able to run all these attributes as a string. I have tried FULLFILENAME|PLOT DATE|PLOT TIME12 with spaces, commas, ( ), " ", etc. and I do not know the proper syntax to get this to work. I have also tried (getenv "FULLFILENAME") or the getvar, in the title descriptions box.
View 1 Replies View RelatedAutoCAD Architecture 2011
Windows 7 x64
8GB RAM
Created new PC3 for KIP 3100 plotter using its AutoCAD Heidi driver for Win7x64. Upon plot preview the following error occurs.
This causes a crash report which has been submitted to Autodesk. The response was to install service pack 2. Error still occurs after installing the service pack.
Using the non-AutoCAD driver works.
In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
Unfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.
I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines.
Here is some background info. My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings. Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration. I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.
When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color. All my lineweights in the layers property manager are set to default. I have attached a blank drawing that is based off of my template.