AutoCAD Inventor :: Bill Of Materials Shows Unused IParts
Sep 19, 2012
I have an iassembly with iparts in an .iam file and I went to make a shop drawing of this assembly. When I go to do this, I get my parts list showing all versions of the iparts, even the ones that are not used. It will show a 0 in quantity.
This is under the "structured" view and I do not see a "pars" tab, which is what I've read I need to look for.
I've read that I have to be very careful with the way that I create iassemblies and iparts, How to make a drawing with a BOM that only shows the parts currently in use.
View 1 Replies
ADVERTISEMENT
Aug 19, 2013
When i use the BOM feature, i get a list but cannot get panel sizes as dimensions in a table. I can get a part ID and other not so important in for for a BOM but dimensions and sizes should be key.
How can i get a detailed BOM to include panel sizes (like a cut list).
View 3 Replies
View Related
Jun 12, 2013
I am seeing this "varies" message on certain items in my BOM but can't tell where the incosistencies are. The strange thing is that my part number LCVINYL is showing the correct length of material while the Unit Quantity is showing "varies". Normally this would make me think that the inconsistency is in the name only. Where should I be looking to correct this?
BTW all of these LCVINYL parts were created in the frame generator if that matters.
View 4 Replies
View Related
Aug 13, 2013
I changed the names and locations of my parts in an assembly, opened the drawing, and found all of the parts and names. I then looked at the parts list on the assemblies in the drawings. Even though the assemblies updated, the part name did not update. How do I update the BOM to match the assembly (I thought it would do this automatically?)?
View 2 Replies
View Related
Apr 20, 2012
I have tube and pipe subassembly in my assembly. When I see my BOM, each route is a subassembly but some not, and went I add balloon on pipe from "this not subassembly but in realy is one" it give me the same item number for each pipe generate in this route.
How can change this "fake" part to assembly for BOM?
View 6 Replies
View Related
Mar 5, 2013
How & where I can add fields that I require for my equipment. I see I can add it to the bill of materials in the assembly but that doesn't carry through to the drawing.
I see that I can add to the parts list in the drawing but i don't want to have to add the information into my drawings every time I use one of my machines.
Basically I am busy creating a library of all the machines I use. This library will then be used for numerous drawing for many different clients. I need the required info to be in my drawing from the beginning without me having to add it to every clients drawing.
View 6 Replies
View Related
Jun 11, 2013
I have a problem with Bill Of Materials in drawings.
I want to show a structured list of the top level components in this general arrangement. But whenever i select a view for inventor to create the table it only gives me to option for 'Components Only.'
I have edited the assembly and switched off the 'Components only' option in the IAM, but it still will only let me put a parts only BOM into the drawing. I have right clicked the node in the IDW browser and selected 'bill of materials' and here i have also switched off 'parts only' but still the same.
How do i get a top level BOM into my drawing?
iv12(sp2) w7(6.1 SP1) 16gb ram NIVIDA
View 2 Replies
View Related
Sep 16, 2013
Im trying to generate a list of parts and assemblies that has all the quantities included in it.Ive found that if i use the structured view it does not multiply the part count by the number of assemblies, so if i export the bill of materials i wont get the actual number of parts that i require.
If i use the parts only list then it wont include the sub assemblies.the job that im working on has hundreds of sub assemblies and thousands of parts so manually adding them up is not an option.Using Inventor 2014 Pro.
View 9 Replies
View Related
Oct 14, 2013
I am using AutoCAD 2014. We were recently asked if there is a way to automatically update bill of materials if you change or add materials in a drawing. Bill of material is not necessarily in the same drawing? Do I need to create a table?
We normally just create a bill of material separately from the rest of the drawings in AutoCAD. They also want to be able to export it to exel
View 3 Replies
View Related
Jul 14, 2012
I am doing a project where am required to open AutoCAD Database and Extract Data from AutoCAD.I am using VB.Net as Front End.I am not using NetLoad.
Directly i am opening the AutoCAD Drawing and trying to access the data.
acadApp = CreateObject("AutoCAD.Application")
acadApp.Visible = False
Dim ValCount As Integer = 0
'acadDoc = acadApp.Documents.Open(Files(ValCount), True, Type.Missing)
acadApp.Documents.Open("C:SomeDwg.dwg", True, Type.Missing)
acadApp.Visible=false
Now using acadApp i am trying to extract Data as AcadApp has AutoCAD Drawing
View 9 Replies
View Related
May 21, 2013
I am drawing water pumping stations for my company, and they are wanting to do a "Bill of Material" for each job. But they are wanting to do it through the block attribute system in autocad. This actually seems more time consuming than just counting the parts and inserting the new quantities in a table.
I am drawing these with 2 and sometimes 3 views.....the problem with that, I would draw 3 views of a valve (3 blocks), and It counts it as 3 different valves.
View 1 Replies
View Related
Dec 6, 2012
Is there a fast, acurate way to convert a Bill Of Materials done in autocad text (I could convert it to mtext if I have to) onto a word document?
I am able to do it line by line with ddedit /copy but what a hassel.
View 8 Replies
View Related
Feb 22, 2013
I've got some insulation that is colored white and no matter what white I use or alter the views still show grey. 2011 didn't have this problem as white-flat looked white on screen.
View 1 Replies
View Related
Jan 25, 2013
Can Revit architecture 2012/2013 create a bill of materials? If not, which autodesk product can create a bill of materials on a kitchen design?
View 1 Replies
View Related
Sep 13, 2011
Is there a way to "clean up" the material editor of unused materials? i.e. in Maya you can choose to delete unused nodes, so the only materials that remain are the ones in your scene.
View 2 Replies
View Related
Jul 20, 2012
It was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
View 6 Replies
View Related
Nov 28, 2012
I have an assembly which includes another one assembly also. So the issue is when i am generating the bill of material, the assembly which i have attached to the main assembly showing as single item with the assembly name.
The sub assembly i have attached to the main assembly by place and constaint option.does that making the problem ?
Inventor Professional Suite 2010
Windows 7
View 8 Replies
View Related
Jan 30, 2013
There is import button which is import column schema (xml file) from file on Bill of Material window... Is it possible to make this within API, VB Express 2010.
View 2 Replies
View Related
Jul 5, 2013
I created an iPart of a flat sheet metal with several holes in it. It requires 3 Parameters to be be defined:
- length (user defined parameter which can take any value)
- width (user defined parameter which can take any value)
- hole_diameter
I created a skeleton file with several user defined parameters including length and width.
Both files (skeleton.ipt and flat_sheet.ipt) are placed in the same assembly. I now would like IPart instance to follow along the changes made in the skeleton - but how do I connect these parameters? and if not, what would be an appropriate Top Down approach for including iParts?
View 1 Replies
View Related
Oct 21, 2011
If I put iParts into an assembly, and then convert this assembly to an iAssembly, I can include "Table Replace [My_iPart]" as a column in the parameter table. As the value of this column I can select the individual rows of the given iPart parameter table.
However, I can not make this column be a "Custom Parameter Column". (In fact it seems to me that in an iAssembly I can not make any other types of columns to be "Custom Parameter Columns" either). Also, if a parameter of the iPart is a "custom parameter", I can not carry over this "customness" into the iAuthor parameter table.
This means that I need to insert table rows by hand, one-by-one, which is quite cumbersome. Imagine you have an iAssembly containing only two iParts, each having N rows. This means N^2 rows in the iAssembly, all of which I need to specify by hand. Plus I can not use the "customness" of a parameter of an iPart within the assembly.
In an iAssembly containing an iPart, I would like to
- have a "Custom Parameter Column" in the iAssembly parameter table, which can select rows from the iPart parameter table (selectable values would automatically be all the rows from the correcponding iPart)
- if my iPart has a custom parameter, I would like to have this custom parameter available as a separate custom-value column in the iAssembly
Is it possible somehow? Or is it conceptually wrong?
View 3 Replies
View Related
Aug 14, 2013
This is using Inventor 2013 Professional.
I've created a simple iPart and want to insert multiple instances of it into an assembly. The plan is to use a parameter-driven iPart to create multiple variations on the same basic model which will eventually be lasercut.
I've included a sample archive. 2DiPart is a simple part with a couple parameters. 2Dassembly is where I've tried to include this part. I'm able to walk through all the dialogs to place the iPart, and will even see it in the canvas as I select the insertion point. However, after I dismiss the dialog, nothing shows up in the canvas. I'm still able to see the component instances in the project explorer however.
How to best to get multiple instances of a parametric iPart into a drawing that can be lasercut.
View 2 Replies
View Related
Jan 3, 2012
I created a Ipart with like 14 different configurations now it operates smoothly within the part. Now once i insert it into a assembly it wont let me chance the configuration. I heard there was a problem like this but i thought it was only when you insert a part into a assembly and change it into a ipart while its still within a assembly.
Now my part never was in a assembly. Ill upload it and let me know if you have the same issue. Once i drop the part it doesn't give me the option to choose a configuration and when i click the configuration in the itable it still doesnt change it. Now this is only within a assembly.
View 8 Replies
View Related
Sep 26, 2013
Subject: Inventor placing Iparts in Assembly (Autodesk Inventor 2010)
Problem:
When placing an Ipart into a project Assembly it will make a copy of that variant and place it in the same map as the Ipart.
So when variant B of Ipart A is selected it will make a copy of variant B in the same folder where Ipart A is located.
Question:
Is it possible to make a “save as” option or another similar manner to save those copies of variant B in a project map of a project assembly?
Instead of saving all the Ipart variants to a single folder. So each time a new project is started they have all the parts in the same folder.
Reason:
I am making a local library for parts that are used for repairs. These parts have many variants and some times need to be customized for a repair.
The current system keeps polluting itself causing the users to loose their parts and accidentally delete the original parts etc.
I contacted Autodesk support and theyrecommended to post this question on this forum. They did mentioned that vba programming could achieve this. I have no knowledge of this type of programming.
View 1 Replies
View Related
Oct 21, 2011
I have a wishlist item. One of my major process-related issues with iparts is the fact getting variables into your table is inconvenient. Why wouldn't it be possible to put an "Add to IPart Table" option in the context menus for dimensions, planes, features, anything you can put in the table from the table window. That way you are not constantly moving back and forth between your sketches and your table when you set up an Ipart or Iassembly. This feature would save me TONS of time as well as clean up my tables. Right now the easiest way to set up the table when dealing with a complex sketch is just to add all the dimensions, make my changes for each variation, save to table and then go back and delete the columns I didn't change.
View 5 Replies
View Related
Feb 3, 2012
How do you change from one i-part to different one within the assembly?
View 4 Replies
View Related
Feb 14, 2012
I need a parameter from an iPart to show up in my Parts List by using the Stock Number iProperty, then CHANGE with each variation of the iPart (PLATE BC-01, PLATE BC-02, PLATE BC-03, etc). I already have the parameter exported, named 'BOTTOM_A.' Stock number has the expression: '=1/4" HRS x <BOTTOM_A>.'
However, this only works for that particular part. The number does not change when I place a Parts List for PLATE BC-02 and PLATE BC-03. All three have the same number. I found that the number corresponds to the active part. If I double-click PLATE BC-02 in the ipt file to show it, the number for the separate Parts Lists will all correspond to PLATE BC-02.
I've attached an image of the Parts Lists after double-clicking PLATE BC-02 in PLATE BC.ipt. I can include more if needed.
View 4 Replies
View Related
Oct 23, 2013
I have a large library of standard parts and assemblies that I will be migrating from Inventor 2009 to Inventor 2013
Residing in this library are iparts and iassemblies. Both the factory and the members.
Question is how to migrate these iparts and iassemblies,.
option 1 migrate the factory first THEN the members
option 2 migrate the members then the factory (pretty sure this will not work)
option 3 migrate both factory and members at the same time
option 4 migrate the factory and generate new members (not my favorite option)
option 5 ?????
I should add that I intend to use task scheduler to migrate the files
Inventor 2010
View 5 Replies
View Related
Jun 7, 2012
When we create iparts and generate the files from the mother ipart, Inventor creates an additional folder to place the iparts into. Is there a setting somewhere to force Inventor to place these generated files into a user defined location?
Or is this just something we have to live with and do we have to manually move the files after generating them.
View 5 Replies
View Related
Apr 13, 2012
I am finding it difficult to find good through examples of how to use iLogic with iParts and iAssemblies. I have been through several of tutorials, but can't seem to find examples for what I need. Here is a link to a video to give you a bit of an idea of what I am trying to do. How/when and what snippets to use in order to get the iParts and iAssemblies to function properly.
See Video : [URL].....
First video went to long here is the rest.. [URL].......
One thing I think I mentioned in the last video, but not sure I explained it well, is that instead of having the main file name show up in the browser..the part name shows up. When I go to change parts using a form I created it keeps telling me it can't find the current part.
View 1 Replies
View Related
Jan 12, 2010
users using i-parts and i-assemblies with vault. The links seem to cause more problems than its worth. Assemblies that constantly want to be updated, rebuilt, parts lists on drawings using data from the wrong instance of the factory. etc.
View 9 Replies
View Related
Apr 12, 2013
The attached sketch shows how I originally decided to use iParts in drawings and assemblies. In assemblies I use the generated iPart, and in drawings I use the "master" iPart file. I did that because I wanted to keep the drawing linked to the "master" part, to avoid the situation where the drawing would be out of date because I forgot to regenerate the iParts.
The problem is that I don't know how to force the drawing to refer to the correct version of the iPart. To use the terminology in my sketch, I open X2.idw and get a drawing of X1.ipt, not X2.ipt. Should I use the generated iPart in my drawings? And, if so, is there a way I can automatically regenerate. I'm prone to forgetting key steps like that.
View 7 Replies
View Related
