I have an assembly which includes another one assembly also. So the issue is when i am generating the bill of material, the assembly which i have attached to the main assembly showing as single item with the assembly name.
The sub assembly i have attached to the main assembly by place and constaint option.does that making the problem ?
Inventor Professional Suite 2010
Windows 7
There is import button which is import column schema (xml file) from file on Bill of Material window... Is it possible to make this within API, VB Express 2010.
View 2 Replies View RelatedWhen i use the BOM feature, i get a list but cannot get panel sizes as dimensions in a table. I can get a part ID and other not so important in for for a BOM but dimensions and sizes should be key.
How can i get a detailed BOM to include panel sizes (like a cut list).
I am seeing this "varies" message on certain items in my BOM but can't tell where the incosistencies are. The strange thing is that my part number LCVINYL is showing the correct length of material while the Unit Quantity is showing "varies". Normally this would make me think that the inconsistency is in the name only. Where should I be looking to correct this?
BTW all of these LCVINYL parts were created in the frame generator if that matters.
I changed the names and locations of my parts in an assembly, opened the drawing, and found all of the parts and names. I then looked at the parts list on the assemblies in the drawings. Even though the assemblies updated, the part name did not update. How do I update the BOM to match the assembly (I thought it would do this automatically?)?
View 2 Replies View RelatedI have tube and pipe subassembly in my assembly. When I see my BOM, each route is a subassembly but some not, and went I add balloon on pipe from "this not subassembly but in realy is one" it give me the same item number for each pipe generate in this route.
How can change this "fake" part to assembly for BOM?
How & where I can add fields that I require for my equipment. I see I can add it to the bill of materials in the assembly but that doesn't carry through to the drawing.
I see that I can add to the parts list in the drawing but i don't want to have to add the information into my drawings every time I use one of my machines.
Basically I am busy creating a library of all the machines I use. This library will then be used for numerous drawing for many different clients. I need the required info to be in my drawing from the beginning without me having to add it to every clients drawing.
I have an iassembly with iparts in an .iam file and I went to make a shop drawing of this assembly. When I go to do this, I get my parts list showing all versions of the iparts, even the ones that are not used. It will show a 0 in quantity.
This is under the "structured" view and I do not see a "pars" tab, which is what I've read I need to look for.
I've read that I have to be very careful with the way that I create iassemblies and iparts, How to make a drawing with a BOM that only shows the parts currently in use.
I have a problem with Bill Of Materials in drawings.
I want to show a structured list of the top level components in this general arrangement. But whenever i select a view for inventor to create the table it only gives me to option for 'Components Only.'
I have edited the assembly and switched off the 'Components only' option in the IAM, but it still will only let me put a parts only BOM into the drawing. I have right clicked the node in the IDW browser and selected 'bill of materials' and here i have also switched off 'parts only' but still the same.
How do i get a top level BOM into my drawing?
iv12(sp2) w7(6.1 SP1) 16gb ram NIVIDA
Im trying to generate a list of parts and assemblies that has all the quantities included in it.Ive found that if i use the structured view it does not multiply the part count by the number of assemblies, so if i export the bill of materials i wont get the actual number of parts that i require.
If i use the parts only list then it wont include the sub assemblies.the job that im working on has hundreds of sub assemblies and thousands of parts so manually adding them up is not an option.Using Inventor 2014 Pro.
I can delete every unused material except one in the Material Editor.I am trying to make the custom Material library and somehowI have got the Material I cannot delete. URL....
View 9 Replies View RelatedI am in the samill building buisness. While designing I thought it would be nice to show logs on our equipment. Is there anyway to show bark on drawings to show the texture on the final drawing?
View 1 Replies View RelatedI am using AutoCAD 2014. We were recently asked if there is a way to automatically update bill of materials if you change or add materials in a drawing. Bill of material is not necessarily in the same drawing? Do I need to create a table?
We normally just create a bill of material separately from the rest of the drawings in AutoCAD. They also want to be able to export it to exel
I am doing a project where am required to open AutoCAD Database and Extract Data from AutoCAD.I am using VB.Net as Front End.I am not using NetLoad.
Directly i am opening the AutoCAD Drawing and trying to access the data.
acadApp = CreateObject("AutoCAD.Application")
acadApp.Visible = False
Dim ValCount As Integer = 0
'acadDoc = acadApp.Documents.Open(Files(ValCount), True, Type.Missing)
acadApp.Documents.Open("C:SomeDwg.dwg", True, Type.Missing)
acadApp.Visible=false
Now using acadApp i am trying to extract Data as AcadApp has AutoCAD Drawing
i have created a simle part file which has a User parameter (L). The part should be cut with a laser cutting machine.
My problem is, that there is 76 different dimensions for L parameter. So I have to generate 76 different dxf drawing.
is there a way to crearte a VBA code for modifying the L parameter, regenerate the part file, and export the surface of the part file as a DXF file?
We face the problems of generate of L section in AutoCAD 2014 LT when we appload data from notepad the same command is not working (Appload Command is not working) in the same command is working in AutoCad 2010.
View 1 Replies View RelatedI am drawing water pumping stations for my company, and they are wanting to do a "Bill of Material" for each job. But they are wanting to do it through the block attribute system in autocad. This actually seems more time consuming than just counting the parts and inserting the new quantities in a table.
I am drawing these with 2 and sometimes 3 views.....the problem with that, I would draw 3 views of a valve (3 blocks), and It counts it as 3 different valves.
I have created a point cloud and surface from LiDAR data. The point cloud data was relatively large from what I am familiar with (approximately 30 GB all told), and ESRI ASC surface file (approximately 8 GB) was generated after a laborious wait. However, when I attempt to add the ASC file as a raster to view the surface, MAP 3D crashes and loses connection with my PC (i.e. window freezes, and I have to force MAP 3D to shutdown). My computer is fairly updated with quad core processor, 3 GB RAM, etc. Is this not enough power to process such a large image file, or have I error ?
View 2 Replies View RelatedI have a drawing with surface profiles and the linetype generation is working on some and not the others. They're all dynamic and they're not dref'd in and like I said, a few with the same style look correct and a few are incorrect.
C3D 2012
I'm woring with 2D polylines as exported from another piece of software. The problem I have is that the LTGeneration resets to disabled evertime a polyline is edited, ie broken or trimmed. Plinegen is set to 1 as the system variable, but as far as I can tell every time a line is broken etc it creates a new entity that doesn't inherit the ltgen properties of the previous line or the system variables. I know i can convert to polylines, but is there a better way?
View 6 Replies View RelatedIn the sheet profile view the sampled(existing ground) profile for all 3 profiles does not generate the correct linetype(sample 1). The design drawing that I created the individual sheet from displays it correctly (sample 2). The preferences show it is generating(sample 3), it’s just not displaying correctly in the sheet itself.
View 8 Replies View RelatedI have a piece of code that needs closed polylines.
I use the following selectionfilter to filter the selection so I can only select closed polylines:
Dim sf As New SelectionFilter(New TypedValue() {New TypedValue(0, "LWPOLYLINE"), New TypedValue(70, 1)})
Today I noticed that in some drawings this filter won't select all the closed polylines for me.
After some experimenting I found the 'linetype generation' property of the polylines to be the problem. If this is enabled the above filter will not let me select a closed polyline. If I disable it, there is no problem.
How can I make my code for selecting closed polylines more robust? Is there a 'TypedValue' for closed polylines with the linetype generation enabled?
I am happy that survey figures now have the long awaited "linetype generation" on in 2013 but sometimes I need it off. Is there a toggle or am I now STUCK with it on all the time?
View 2 Replies View RelatedCan't seem to locate the Inventor Material Library....under Default in Projects, the Inventor Material Library is highlighted in Red. Where I need to browse to inorder to locate it?
View 2 Replies View RelatedIs there a fast, acurate way to convert a Bill Of Materials done in autocad text (I could convert it to mtext if I have to) onto a word document?
I am able to do it line by line with ddedit /copy but what a hassel.
Is there a way for the scale to be correct to the drawing?
View 1 Replies View RelatedI changed the material using the vb.net code shown below.but after changing material the object is not updated ,the volume and mass didn't change .
Dim oDoc As PartDocument
oDoc = inventorApp.ActiveDocument
Dim oDTProps As PropertySet
oDTProps = oDoc.PropertySets.Item("{32853F0F-3444-11d1-9E93-0060B03C1CA6}")
[code]....
How to make a type of material go in one direction or by another degree . Ex: if you click on a wood type material, it goes up or down and right or left depending which side of that object is. On the picture below, it goes up and down, side to side no all sides go in one direction. I need to know how to mange the direction of the way of where the material go.
View 7 Replies View RelatedIs there a way to export a Inventor .iam/.ipt to .stp/.sat and keep material property and center of Gravity?
Is there any "external" format that will keep these properties?
We are a mid sized company the builds our parts from raw materials. Steel Coils, Steel tubing, Steel plate, etc.
We are have been migrating from MDT to Inventor over the last few years. We are now trying to implement Vault and integrate that data into our ERP system. We would like to model a part and assembly and check that into Vault then pass the BOM into our ERP system.
It all sounds good up until I looked at how our part files were structured. There is not BOM in an ipt that I have found phantom or referential. Here is my problem
It takes 1 lb of a .0625" thich steel sheet that is 6.5" wide. We stamp our product in a 200 ton press producing a finish componet.Problem 1- Part1.ipt (model of my stamping) does not have a lower level it is a component in Inventor there is no BOM that I have found.Problem 2 - Part2.iam uses part1ipt but we punch a hole in it and push material outward to create a lip so we can lap weld the next part.When I try to extrude this feature I can only cut the part I cannot add material or deform it in any way.Problem 3 - We also manufacture bent tubes. We consume 1.5 ft of part C to make part D. I cannot insert 1.5ft of a part that is 20ft long as we buy it. then we bend it. I cannot insert a 1.5ft part into an assembly and then bend it.
Major problem - even though I can change the dwg file or idw file to add a parts list Vault does not put this information in the Item master BOM.
We have a general template (excel file) for material list. Is there way to connect this template with inventor. Or alternatively change the inventor BOM list to suite our template?
View 1 Replies View Related