AutoCAD Inventor :: Bill Of Materials Varies
Jun 12, 2013
I am seeing this "varies" message on certain items in my BOM but can't tell where the incosistencies are. The strange thing is that my part number LCVINYL is showing the correct length of material while the Unit Quantity is showing "varies". Normally this would make me think that the inconsistency is in the name only. Where should I be looking to correct this?
BTW all of these LCVINYL parts were created in the frame generator if that matters.
View 4 Replies
ADVERTISEMENT
Aug 19, 2013
When i use the BOM feature, i get a list but cannot get panel sizes as dimensions in a table. I can get a part ID and other not so important in for for a BOM but dimensions and sizes should be key.
How can i get a detailed BOM to include panel sizes (like a cut list).
View 3 Replies
View Related
Aug 13, 2013
I changed the names and locations of my parts in an assembly, opened the drawing, and found all of the parts and names. I then looked at the parts list on the assemblies in the drawings. Even though the assemblies updated, the part name did not update. How do I update the BOM to match the assembly (I thought it would do this automatically?)?
View 2 Replies
View Related
Apr 20, 2012
I have tube and pipe subassembly in my assembly. When I see my BOM, each route is a subassembly but some not, and went I add balloon on pipe from "this not subassembly but in realy is one" it give me the same item number for each pipe generate in this route.
How can change this "fake" part to assembly for BOM?
View 6 Replies
View Related
Mar 5, 2013
How & where I can add fields that I require for my equipment. I see I can add it to the bill of materials in the assembly but that doesn't carry through to the drawing.
I see that I can add to the parts list in the drawing but i don't want to have to add the information into my drawings every time I use one of my machines.
Basically I am busy creating a library of all the machines I use. This library will then be used for numerous drawing for many different clients. I need the required info to be in my drawing from the beginning without me having to add it to every clients drawing.
View 6 Replies
View Related
Sep 19, 2012
I have an iassembly with iparts in an .iam file and I went to make a shop drawing of this assembly. When I go to do this, I get my parts list showing all versions of the iparts, even the ones that are not used. It will show a 0 in quantity.
This is under the "structured" view and I do not see a "pars" tab, which is what I've read I need to look for.
I've read that I have to be very careful with the way that I create iassemblies and iparts, How to make a drawing with a BOM that only shows the parts currently in use.
View 1 Replies
View Related
Jun 11, 2013
I have a problem with Bill Of Materials in drawings.
I want to show a structured list of the top level components in this general arrangement. But whenever i select a view for inventor to create the table it only gives me to option for 'Components Only.'
I have edited the assembly and switched off the 'Components only' option in the IAM, but it still will only let me put a parts only BOM into the drawing. I have right clicked the node in the IDW browser and selected 'bill of materials' and here i have also switched off 'parts only' but still the same.
How do i get a top level BOM into my drawing?
iv12(sp2) w7(6.1 SP1) 16gb ram NIVIDA
View 2 Replies
View Related
Sep 16, 2013
Im trying to generate a list of parts and assemblies that has all the quantities included in it.Ive found that if i use the structured view it does not multiply the part count by the number of assemblies, so if i export the bill of materials i wont get the actual number of parts that i require.
If i use the parts only list then it wont include the sub assemblies.the job that im working on has hundreds of sub assemblies and thousands of parts so manually adding them up is not an option.Using Inventor 2014 Pro.
View 9 Replies
View Related
Oct 14, 2013
I am using AutoCAD 2014. We were recently asked if there is a way to automatically update bill of materials if you change or add materials in a drawing. Bill of material is not necessarily in the same drawing? Do I need to create a table?
We normally just create a bill of material separately from the rest of the drawings in AutoCAD. They also want to be able to export it to exel
View 3 Replies
View Related
Jul 14, 2012
I am doing a project where am required to open AutoCAD Database and Extract Data from AutoCAD.I am using VB.Net as Front End.I am not using NetLoad.
Directly i am opening the AutoCAD Drawing and trying to access the data.
acadApp = CreateObject("AutoCAD.Application")
acadApp.Visible = False
Dim ValCount As Integer = 0
'acadDoc = acadApp.Documents.Open(Files(ValCount), True, Type.Missing)
acadApp.Documents.Open("C:SomeDwg.dwg", True, Type.Missing)
acadApp.Visible=false
Now using acadApp i am trying to extract Data as AcadApp has AutoCAD Drawing
View 9 Replies
View Related
May 21, 2013
I am drawing water pumping stations for my company, and they are wanting to do a "Bill of Material" for each job. But they are wanting to do it through the block attribute system in autocad. This actually seems more time consuming than just counting the parts and inserting the new quantities in a table.
I am drawing these with 2 and sometimes 3 views.....the problem with that, I would draw 3 views of a valve (3 blocks), and It counts it as 3 different valves.
View 1 Replies
View Related
Dec 6, 2012
Is there a fast, acurate way to convert a Bill Of Materials done in autocad text (I could convert it to mtext if I have to) onto a word document?
I am able to do it line by line with ddedit /copy but what a hassel.
View 8 Replies
View Related
Jan 25, 2013
Can Revit architecture 2012/2013 create a bill of materials? If not, which autodesk product can create a bill of materials on a kitchen design?
View 1 Replies
View Related
Nov 16, 2012
In assembly file - BOM - mass property, parts with the same name (part number) i get "VARIES"..Parts have a little bit different mass - 0,167kg and 0,168kg. I do not want to have different part number.
So, i'm going to do something like this in iLogic :
iProperties.MassOfComponent("fi_N1:1")=Round(iProperties.MassOfComponent("fi_N1:1"),1)
it works but is there any way to do it for all parts (hundreds) automagically in the loop (iLogic or VB) ?
View 1 Replies
View Related
Mar 16, 2012
In one of the columns, for different parts I have value *Varies* displayed instead of iproperty value that other parts display. Why?
View 3 Replies
View Related
Mar 2, 2012
I have another issue with Fram Generator drawing BOM;
One of my like components has cutouts in it, making the mass "Varies" between these like components.
View 9 Replies
View Related
Jul 11, 2013
In particular item 29 - same part number, exactly the same parameters (I checked them one by one), but a "Varies" for Unit Qty.It is a truss frame, and item 29, as many others, has "trim to frame" end treatments.
View 1 Replies
View Related
Aug 6, 2012
I need a special pattern that varies the original sketch dim. Is this possible?
C1
C1
Inventor Professional 2013
Vault Collaboration 2013
View 9 Replies
View Related
Nov 4, 2011
I noticed on my parts list that I had an item that was listed as *Varies* in the description, and part # columns I have set. Seen it before, so I went to my BOM and saw that it's a part that I've published to the CC.
Thought, OK, go and replace the 12 parts that I needed to. Tried the "Replace All" and it still came up on my BOM as *Varies*.
Went through and replaced each part in the assembly one at a time. Still shows up in BOM as *Varies*.
I thought that when I publish parts to the CC, they become Read-Only, and I can't edit any of the iProperties or the part itself.
In the attached BMP, I've cut out the offending row in my BOM. All the columns are greyed out to where I can't edit anything, as designed...
Why would these published parts come up as *Varies* in 2 of my columns if the values I've set when I published them would never change??
IV 2010 Tube & Pipe SP4; ACAD Mechanical 2010;
2.5 ghz Xeon Processor
8 gb RAM
Windows 7 Professional x64
EVGA GTX 560 2gb DDR5
View 2 Replies
View Related
Nov 28, 2012
I have an assembly which includes another one assembly also. So the issue is when i am generating the bill of material, the assembly which i have attached to the main assembly showing as single item with the assembly name.
The sub assembly i have attached to the main assembly by place and constaint option.does that making the problem ?
Inventor Professional Suite 2010
Windows 7
View 8 Replies
View Related
Mar 18, 2013
I've used Frame Generator to build a frame. Then in my idw , I've created a "part list" of the frame and added "Mass" to the Columns , some member shows the mass , but others show *Varies*, I note that when I leave out the "End Treatments" I don't have the *varies*,
View 6 Replies
View Related
Jan 30, 2013
There is import button which is import column schema (xml file) from file on Bill of Material window... Is it possible to make this within API, VB Express 2010.
View 2 Replies
View Related
Jun 16, 2011
I am running Autodesk Inventor Professional 2010. I use FEA a lot on steel and aluminum structures but was wondering if Inventor is capable of doing FEA on composite structures. I personally want to estimate the strength of some carbon fiber tubing but wasn't sure whether or not I would be getting good data from it. I know that composites don't yield and was wondering how or if that will affect anything. Also, if you can do an FEA on a composite, any solid website to get material properties from?
View 3 Replies
View Related
Jun 10, 2013
All of a sudden, I have very limited selections for part color and material. What setting has changed that causes this?
View 5 Replies
View Related
Mar 1, 2012
I came up with 2 questions related to my Inventor 2012 install :
1. Is there a way to install only Showcase 2012 from install kit if on fist "session" I've unchecked it from customize-installation? How ?
2. Can I add new materials to library ? If so is there a website with samples to upgrade inventor material library with new ones?
View 2 Replies
View Related
Sep 26, 2012
Could you tell me or give me a link to the procedure to migrate the materials library. I have a materials library that I created in 2012 and I would like to migrate it to 2013.
View 4 Replies
View Related
Jan 24, 2013
I have successfully opened a STEP file from our Engineering group and saved it away as an Inventor Assembly. I would like to define Materials and/or Surface finishes for all parts. Why wouldn't the Surfaces and Materials synchronize between the Styudio's Surface Creator and the BOM Materials Control in the Assembly area?
I have found the way to define a new Surface in the "Inventor Studio" Interface and saved it with a unique name. Now, I would like to assign that Surface as a Material to the parts in the assembly ... and of course I would like to define numerous other surfaces and materials for assignment to all the parts throughout the assembly. Finally, I would like these surfaces / materials to follow the model into Showcase for presentation purposes.
View 1 Replies
View Related
Mar 21, 2012
Is it possible to change materials mid animation in inventor 2012? Essentially, im looking to rotate a camera arround an assembly,make the enclosure glass and do it again.
Additionally, Is there a way to use animations already created in an ipt file (using the same model) in Inventor Studio?
View 4 Replies
View Related
Jul 30, 2012
I am lookng for a way to allow multiple material selections for a drawing/model
We have components that avaialable in both 304 and 316. We have seperated stock codes for each of the selections what I would like to do is to come up with a way that I don't need multiple models of these features. The deisgns are virtually the same except for the material change.
In previous cad systems I used a tabled system in the model that would allow you to vary paramters such as Iproperties or even dimensions in one model.
This elimated duplication of work includeing double maintenance for the models?
View 4 Replies
View Related
Jan 5, 2011
Is there a way to associate layers to materials so when they are placed in a drawing they are automatically placed on the proper layer. I have line weights set for each individual layer and would like each material component to have its own line weight.
View 9 Replies
View Related
Jun 29, 2010
Two questions.
Is there a way to add new materials to physical properties?
Is there a cloud feature in Inventor for drawings, or is that something that can only be done in Autocad Mechanical and Mechanical Desktop?
View 5 Replies
View Related
