AutoCAD Inventor :: CC Published Parts - (VARIES) In Columns?
Nov 4, 2011
I noticed on my parts list that I had an item that was listed as *Varies* in the description, and part # columns I have set. Seen it before, so I went to my BOM and saw that it's a part that I've published to the CC.
Thought, OK, go and replace the 12 parts that I needed to. Tried the "Replace All" and it still came up on my BOM as *Varies*.
Went through and replaced each part in the assembly one at a time. Still shows up in BOM as *Varies*.
I thought that when I publish parts to the CC, they become Read-Only, and I can't edit any of the iProperties or the part itself.
In the attached BMP, I've cut out the offending row in my BOM. All the columns are greyed out to where I can't edit anything, as designed...
Why would these published parts come up as *Varies* in 2 of my columns if the values I've set when I published them would never change??
IV 2010 Tube & Pipe SP4; ACAD Mechanical 2010;
2.5 ghz Xeon Processor
8 gb RAM
Windows 7 Professional x64
EVGA GTX 560 2gb DDR5
View 2 Replies
ADVERTISEMENT
Sep 14, 2006
How do you select parameters for export in parts that have already been published?
I have a part that I have published. There are some parameters that Ii would like to have available to the Parts List upon creation. I don't see a way to do this after the part has been published. I have been able to select the parameters for export before publishing and they will be marked for export when the part is placed form the content Center.2010 Suite-SP4 64bit
View 1 Replies
View Related
Jan 28, 2013
I can publish a part containing a user text parameter to the content centre for use in frame generator however when I go to insert that part an error as per the attached screen shot.
To re-create the error you have to follow the below steps.
Create a part with a text user parameterPublish for use in frame generator.Create frame with the part and an error will be created as per the attached screenshot.
Is there a way to work around this error being created and use parts with text user parameters in Frame Generator?
View 5 Replies
View Related
Aug 9, 2011
Large Assembly / Inventor 2008
I have a layout drawing, and I want to add a parts list, but I want to break it into 2 "columns" rather then a long one
how do I do that?
View 9 Replies
View Related
Nov 8, 2011
I have a situation where I need to add additional columns to a parts list.
These columns will not be a standard inventor column option, I need to put a specific number for reference in that column.
I start by double clicking on the parts list to bring up the editing option. Then I click on "Column Chooser" where I can personalize the parts list.
There is an option to add a "blank" column, which is great, but I need to add more than one.
Every time i add the "blank" column it disappears from the "Available Properties" it goes to the "Selected Properties" side and then when I click on "New Property" to add another "blank" column, it wont let me.
When trying to add the new property I am pressing the "space bar" key in order to leave it blank, but it just wont show as an "add" option in the "aAvailable Properties" section.
The reason I am not typing in the specific numbers is because I want them to be vertical and not horizontal - this saves me space on the drawing.
I've done this before, yet I cannot duplicate what I've done in the past and it's driving me insane.
how I can add multiple "blank" columns.
View 2 Replies
View Related
Nov 16, 2012
In assembly file - BOM - mass property, parts with the same name (part number) i get "VARIES"..Parts have a little bit different mass - 0,167kg and 0,168kg. I do not want to have different part number.
So, i'm going to do something like this in iLogic :
iProperties.MassOfComponent("fi_N1:1")=Round(iProperties.MassOfComponent("fi_N1:1"),1)
it works but is there any way to do it for all parts (hundreds) automagically in the loop (iLogic or VB) ?
View 1 Replies
View Related
Jun 12, 2013
I am seeing this "varies" message on certain items in my BOM but can't tell where the incosistencies are. The strange thing is that my part number LCVINYL is showing the correct length of material while the Unit Quantity is showing "varies". Normally this would make me think that the inconsistency is in the name only. Where should I be looking to correct this?
BTW all of these LCVINYL parts were created in the frame generator if that matters.
View 4 Replies
View Related
Mar 16, 2012
In one of the columns, for different parts I have value *Varies* displayed instead of iproperty value that other parts display. Why?
View 3 Replies
View Related
Mar 2, 2012
I have another issue with Fram Generator drawing BOM;
One of my like components has cutouts in it, making the mass "Varies" between these like components.
View 9 Replies
View Related
Jul 11, 2013
In particular item 29 - same part number, exactly the same parameters (I checked them one by one), but a "Varies" for Unit Qty.It is a truss frame, and item 29, as many others, has "trim to frame" end treatments.
View 1 Replies
View Related
Aug 6, 2012
I need a special pattern that varies the original sketch dim. Is this possible?
C1
C1
Inventor Professional 2013
Vault Collaboration 2013
View 9 Replies
View Related
Mar 18, 2013
I've used Frame Generator to build a frame. Then in my idw , I've created a "part list" of the frame and added "Mass" to the Columns , some member shows the mass , but others show *Varies*, I note that when I leave out the "End Treatments" I don't have the *varies*,
View 6 Replies
View Related
Oct 16, 2013
The attached IPart works wonderfully for all sizes, shows no errors or recovery alerts.
The problem is that once it is published, the ORB end changes for any size 1/2" (8) or under.
It just turns into a Hex head, I don't understand what the problem is.
View 9 Replies
View Related
Oct 17, 2013
Is it possible to move a part in CC when it "landed" in the wrong category/folder?
- - looking for some kind of explorer type drag & drop instead of re-publishing.
se attched jpg, which shows what I mean.
View 9 Replies
View Related
Feb 22, 2012
I had a ipart that i already published into the content center library, how do i go back and edit the model? not all the published data but the ipart model its self
View 1 Replies
View Related
Jul 27, 2012
Is there a way to get columns in form? I would like to put
Hole F Type { List the types} Hole F Location {input box}
Hole N Type { List the types} Hole N Location {input box}
Hole G Type { List the types} Hole G Location {input box}
If not this form will be off the monitor.
View 9 Replies
View Related
Feb 28, 2013
I'm doing a revision rearrangement and would like to add to the BOM New, Existing, and Relocated properties. The problem is that each individual component may be unique. Ie. I have a desk w/ 3 identical monitors. One monitor is existing and the others are new. I'd like to have the BOM show that I have 3 monitors, 2 are new and 1 is existing. The BOM would have 4 columns, one for the total number of parts and 3 for the New, Existing, and Relocated counts.
I don't mind if the new columns need to be manually updated.
View 9 Replies
View Related
Jul 18, 2012
Is there a way to set the decimal place for the columns in Autodesk Inventor 2011? I have a length column I am trying to use for the p/n but I need it to be 2 places and they show up from zero to 4 dec places. I have set it inside excel but it never retains the setting.
View 9 Replies
View Related
Nov 2, 2011
Is there any way that values in BOM columns would automatically change depending on the characteristics of the part?
Example:
I have a parametric metal rod that depending on its length has a different part number assigned to it in our company's catalog.
When I change its length in parametric assembly (50" rod is has different number than 70" rod) I want the part number to change as well in the "part number" column.
View 5 Replies
View Related
Aug 31, 2012
I got this routine off the In The Trenches blog and am trying to change it, some. For some reason when I export I can only get 4 columns to export. So what the heck am I missing here? The Part List I am using has all the colums I am trying to export on it.
'-------------Start Of ilogic ------------------------------------------------
'get the path and name of the drawing file
path_and_name=ThisDoc.PathAndFileName(False)' without extension
'define oDoc
oDoc=ThisDoc.Document
[Code] ....
Inventor Pro 2013 (PDS Ultimate)
Vault Pro 2013
Windows 7 64
Xeon 2.4 Ghz 12GB
View 2 Replies
View Related
Jul 16, 2012
Is there is any way to re-arrange the columns in my ipart table without having to delete all of my parameters and then adding them back in the order that I want them to appear in? I would like certain information grouped together instead of having to scroll back and forth across the row to edit certain parameters.
View 5 Replies
View Related
Nov 28, 2012
I would like to be able to export the description column of a BOM to an excel file, and exclude all the other data. I can't see any reference to doing this in the API. We have almost 20 columns so deleting them once the file is made is a bit of a pain.
View 3 Replies
View Related
Jan 30, 2013
I have an iPart with 10 key columns that I published to the Content Center. During the publishing process I can only select 9 of those key columns and I can't add a 10th. I need to get that 10th one in there. why there is a limit or how to get aroud it?
View 1 Replies
View Related
Sep 27, 2012
I am trying to replace a custom part - created from a content center part - with a copied part with a different name. (I am using the replace tool in an assembly.) However, Inventor is not replacing the part with the part I pick but rather the content center version of it.
View 3 Replies
View Related
Mar 30, 2012
On the main sheet of my drawing I have the overall Parts List. Shows almost all parts except for the few that we don't want to list. On the second sheet I inserted a Parts List to show only parts that are shown in a detail on that page, made the rest non-visible.
On the main sheet there is an item (#13) that has a QTY of 3. Two of those Three are optional parts. What I'm trying to do is insert a custom part into the Parts List, give it an item number of 13A and put in the description "OPTIONAL", then do an Override in the balloon to show 13A.
I get it in the Parts List, Apply it, close it, save the drawing. Looking at the Parts List, item #13A is there, but item #14 is gone. I go back into the Parts List and 13A is there and there's a blue box around the item # and the description. I uncheck Static Value and number 14 shows up (item # and the description).
Then I go over to sheet two, open that Parts List and it lists 13A at the bottom with all the info I added in sheet one and it's non-visible. Go back to sheet one, open the Parts List and there is no 13A to be found.
View 9 Replies
View Related
Jun 5, 2012
How about setting parameters so these four columns show in a boom: Width ft., Width in., Length ft., Length in. Also, how about getting the bom to show surface square footage for coating purposes?
View 3 Replies
View Related
May 18, 2012
I am not a regular user of the Inventor General Table. I can make and edit the table with no problems. I want to eliminate the lines from one of the columns while leaving the lines in the remaining columns. I tried to set up the column before inserting it but could not find the column format that would allow me to do that in the Style Editor.
How to do this. I need to also remove the (read only) from the Style Editor.
View 7 Replies
View Related
May 2, 2013
I am working on an assembly that is designed around a box (bounding box) that could change size. I modeled the bounding box and placed it in a new assembly file. All other parts have been created within the assembly by referencing that bounding box with starting work plane and project geometry.
The problem comes in when I change the bounding box dimensions. The work planes for each additional part, which were defined by the faces of the bounding box, do not move when the sides move. Also, my projected geometry is not updating correctly. This is a simple box, with all 90° corners. So, all associated parts (at this point) are just rectangles.
View 4 Replies
View Related
Aug 21, 2012
My parts list on my idw do not update when I make changes to the model. Specifically, I have deleted a bolted connection on my design and replaced with a different components but the parts list table does not update - all I see is a lightning bolt in the browser next to the parts list but I cannot update it here.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Aug 7, 2013
I was using virtual parts to add nuts and bolts to a drawing in 2013
I can make a VP bolt in the assembly, no problem, set it's size, weight, etc.
In the VP itself, there is no option for number of bolts I want it to emulate. For arguement's sake the weight was 1 pound per bolt (they are big bolts).
I can go into the BOM and say quantity 60, hit done and save the assembly.
If i open the drawing, the parts lists shows 60lbs for the 60 bolts total - which it should when summing the weight.
The problem is the BOM/assembly. If the weight of my assembly (without bolts) is 10,000lbs, the assembly sees the VP weighing 1lb and says the total weight is 10,001 lbs. Am i going to have to pattern a fake part to get this to work right? Shouldn't the total weight take into account the quantity set in the Bom??
View 2 Replies
View Related
Dec 9, 2013
Is there a way to display the density of materials that are assigned to varius parts in the parts list on a drawing? I don't need the mass of the parts I just need the material density to show up next to their respective parts.
For example, if I have a part with [steel mild] material assinged to it (no matter the size) I need a column in the BOM on the drawing to show: 490.684 lbs/ft^3. "Worry when there's something to worry about."
View 3 Replies
View Related