AutoCAD Civil 3D :: How To Insert Or Move Part Of Profile
May 13, 2013I have changed the horizontal aligment.
As there is not any auto-update tool (or I dont see) I need to displace the profile 123,46 meters from 1021.27 stattion.
ADVERTISEMENT
AutoCAD Civil 3D :: Insert A Jog Into Profile Label
Dec 13, 2012Is there a way to insert a jog into a profile label?
View 9 Replies View RelatedAutoCAD Civil 3D :: Drawing Template - Insert For Field For Stations Of A Long Profile
Feb 29, 2012Is it possible to insert a "field" instruction in the drawing template to get automatically the stations (beginning and end) of the long profile for the sheet considered ?
Example 0+700 - 1+400
AutoCAD Civil 3D :: How To Insert Data Of Sample Line In Road Profile - Height And Length
Oct 21, 2013I made an alignment of road, inserted with sample line, then i made a profile. But on the sample line on profile, there is not a data of height and lenght of profile. How to get those data in road profile. I can manually draw that, but i think there is an easier way?
View 1 Replies View RelatedAutoCAD Civil 3D :: Part Publisher Profile
May 3, 2013So, I finally got a 3d solid part published with the one attachement point (autodeskconnectionpoint). Looks great in object viewer with a pipe connected to it. However, put it in profile, and my 8' tall item shows like 1.5ft tall.
content file available, though this won't let me attach it?
AutoCAD Civil 3D :: Create Side Ditch As Part Of Assembly But With Different Profile
Apr 10, 2012I am trying to create an assembly with a U channel (side ditch) that's top will follow the sidewalk it is next to but I need the profile of the U channel to be different than that of the roadway. Is there a way to create a custom subassembly part that will do this? Can I create a different allignment/profile for the bottom of the U channel that can then link to the other assembly?
The only other think I can think of is to use a dynamic block to add the U channel to my cross sections, but that will take a lot of time to do.
AutoCAD Civil 3D :: New Part Builder Pipe Displays Incorrectly In Profile View?
Dec 31, 2013Using part builder, I created a new pipe part for an odd-sized CMP arch pipe. In plan view, the pipe looks good. At first glance, I thought the pipe was drawn correctly in a profile view, but I realized that the pipe was displayed with the invert located at the wrong place in the profile view. I thought this was because the insertion point of the new pipe part that I had made was placed at the incorrect location in part builder.
So, I swapped out the incorrect pipe size for another one that I knew was correct, and then deleted the incorrect pipe from the pipe parts list, and went back to part builder, and placed the insertion point at the invert of the pipe; then saved the edited pipe part, ran partcatalogregen, added the "corrected" pipe part to the pipe parts list and swapped in the new corrected pipe size to the pipe network. However, the pipe still displays incorrrectly on the profile view.
The pipe data is correct in the pipe properties: the invert is stated to be located at elevation 20. The overall height of the pipe , 38" (3.1667') is correctly displayed on the profile view. But the actual location of the pipe invert is not shown at the correct location, elevation 20, on the profile view.
AutoCAD Inventor :: Insert STEP (STP) Part Into Existing Part File?
Sep 11, 2013The simple question is… how can we insert a step (stp) part into an existing part file?
The story behind the question is this:
Normally when we get a step file assembly from a customer, if the part has changed, we put our part into Old Versions and save their new step file as our ipt number and replace it in our assembly file. With Vault, in order for us to maintain the history of the part files, we need to keep the original file so we can’t just delete it or replace it, so now we need to figure out how to get a step file into an ipt. The Import command on the Manage tab (with 2013 at least?) does not allow import of stp files just yet.
The only other option I can think of is to put the original part into an assembly with the step file, create a copy of the step information in the part file and use it to recreate the new (step based) part.
Inventor 2013 (SP2 Update 2), Windows 7 Professional (64-bit), SP1, Intel Xeon 3.07GHz CPU, 12GB RAM, NVIDIA Quadro 2000, Vault Basic 2013
AutoCAD Civil 3D :: Profile Geometry Points Of Superimposed Profile To Alignment Label
Mar 1, 2013I have an alignment label that I normally use to show the PVI's of a profile in the plan view.
This is a little unusual, but in a specific case I wanted to design my profile at one alignment, but show it at another. I designed my swale profile in the pathway profile view and then superimposed the swale profile on the swale profile view. I then went back to the swale alignment to add these labels.
It's a no-go AFAICT. The only profile available for me to select for these labels is the original ground profile from the surface.
AutoCAD Civil 3D :: How To Base Structure Profile Label Location On Top Of Profile View
Nov 4, 2013I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?
View 9 Replies View RelatedAutoCAD Civil 3D :: Creating Profile Bandsets With More Than 2 Profile / Surface Elevations Shown
Mar 14, 2013Im creating a Profile Bandset and would like to have multiple surface/profile elevations shown, ie: EG, FG, Back of Curb and Back of walk. While creating this bandset I see that the text component editor properties only has code for profile 1 elevation and profile 2 elevation in the properties area, which the code for this looks like below.
<[Profile1 Elevation(Uft|P2|RN|Sn|OF|AP)]>
<[Profile2 Elevation(Uft|P3|RN|AP|Sn|OF)]>
Ive tried to write my own code using the profile 2 as an example but it doesnt seem to work as a 3rd surface/profile and only seems to mimic the profile 2 elevation when placed in the band
My questions are as follows
1) does Civil 3d only allow 2 surface elevations in any band set? if it does allow more profiles/surface elevations what am i missing to create it?
2) if Civil 3d does alow for multiple surfaces to be shown in the band set how do i get the text component editor to supply the extra profile elevation codes? or would i need to create from scratch
3) if i need to write the code from scratch does any listing of the codes and meanings of each code ie what does RN, Uft, Sn and so forth do and mean .
AutoCAD Civil 3D :: Editing Profile Style Of Single Profile Instead All Of Profiles?
Mar 5, 2012I have a group of profiles in a drawing and I want to change how one of the profiles is displayed through the profile view style manager, but I do not want to change how all of the profiles look. Is there a way to change the way a single profile looks without changing all of them?
View 2 Replies View RelatedAutoCAD Civil 3D :: Proposed Profile And Existing Surface Not Showing In Profile
Jun 17, 2013I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.
View 3 Replies View RelatedAutoCAD Civil 3D :: Created Profile From File But Cannot Create Profile Report
Jan 17, 2012I am working C3D 2012. I have a proposed alignment and profile design by another firm that I had to tranfer into C3D. I had no problem getting the horizontal alignment to display from a text file. I tried to do the same with the profile by using the 'create a text file and create the profile from file' command. I got the POB, PI's, and POE to display. I then defined the VC. I wanted to verifiy that the profile was indeed accurate compared to what we were provided. So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".
I know the Proposed profile is indeed set to proposed in the properties. I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.
Is there a way to convert this profile to be recognized as a FG profile?
Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit
AutoCAD Civil 3D :: Make Curb Return Profile Without Profile View Like Intersect Command
Feb 28, 2011I try to make curb return profile without profile view like a intersect command.
I was make curb return alignment but I can not find profile command without profile view.
AutoCAD Civil 3D :: Create Dynamic EOP Profile Based On Cross Slope From Center Line Profile
Jun 28, 2012The intersection wizard makes dynamic EOP profiles based off of the cross slope from the centerline. Well the intersection tool doesn't always work with funky intersection layouts. Is it possible to manually create a dynamic EOP profile based on the cross slope from the centerline profile?
Civil 3D 2012
Windows 7, 64 bit
AutoCAD Civil 3D :: Structures In A Profile View Extending Outside The Profile
Nov 22, 2013I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.
Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit
AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View - Update
Jul 24, 2012I have yet to produce a profile. I created a polyline and turned it into an alignment.
Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.
Is the sample5 an alignment that sits on the surface? how come there is still no profile?
AutoCAD Civil 3D :: Showing Profile Elevation Differences Right Above Profile 2
Jul 17, 2012differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.
So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.
AutoCAD Civil 3D :: Create Proposed Profile From Surface Profile
Mar 17, 2011We have an engineer who is taking an existing surface and wants to show a proposed road 2" higher than existing.
I told him to simply adjust his assembly for his corridor to account for the 2" difference, but the County agency needs to see a profile.
My questions:
1) Is there a way to easily copy a profile made from a surface and "convert" it to a proposed profile? If we copy and explode, it turns into hundreds (thousands?) of tiny pline segments and it would be a mess to convert all those to a profile 1 by 1. If we make the corridor, and choose "profile from corridor", we do not have an option that could be used to represent the centerline.
2) Other than loss of dynamic updating), would it make sense to adjust the assembly so the top surface would be accurate, then copy the profile, explode the copy to a block and simply shift that (as essentially basic linework)?
AutoCAD Civil 3D :: Profile Band / Profile Structure Mask
Jul 9, 2012where to change the text height and color for the lower band where the stations are. Also, how do I get the exist grade and proposed grade to show at the specified stations vertically like LDD used to do it.
Second, how do i mask the pipe in the manholes on the profile. Right now i can see the pipe inside the manhole. I clicked "enable masking" under the structure properties but no luck.
AutoCAD Civil 3D :: Surface Profile Not Shown In Profile View
Nov 28, 2012Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir shoreline.
1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing.
2.the points having higher elevation are the top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.
3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir.
AutoCAD Civil 3D :: Adding Profile To Existing Profile Views
May 10, 2013I have 3 profiles that I've superimposed together. Then I created sheets using the superimposed profile. I used the wizard and had Civil 3d do it for me (2012). Now I have to add a 4th profile to the mix and get it to show in my profile views that have already been cut. The data is shortcut into the drawing with my cut profiles views. How do I get it to be in the cut profile views without re cutting everything?
View 1 Replies View RelatedAutoCAD 2010 :: Insert Image As OLE Objects - Cannot Move Or Scale It
Apr 15, 2011When I insert an image as an OLE object, I cannot move it, scale it or anything? Am I missing something?
View 6 Replies View RelatedAutoCAD Inventor :: Insert Part In Assembly On 1 / 2 Planes
Jan 2, 2014Is there a way to insert a part that would be grounded or flush constrained on one or two planes only (automatically) and not all three? For example; you'd insert the part and you'd pick the two planes that you want to be flush constrained but the 3rd plane you'd constrain yourself.
View 2 Replies View RelatedAutoCAD Civil 3D :: Edit Profile Without Having It On Profile View?
Jul 31, 2013A tabular data sheet for profiles could be very interesting.
Civil 3D (2013)
AutoCAD Civil 3D :: Shifted Profile Within Profile View?
Jan 22, 2013I have an issue with a profile referenced into a plan sheet that is shifted when I view it in the plan sheet viewport. The profile stationing is correct in the profile dwg file and in the plan sheet dwg it is referenced into. But when I switch from model space to paper space in my layout sheet (the file the profile dwg is referenced into) the profile moves to the wrong station within my profile view in paper space.
The profile start station is 0+00, but it shifts to -1+00 within the viewport of my layout sheet.
The scales are the same between the dwg files (50) and the Annotation scale matches the dwg scales.
AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View?
Jul 24, 2012I am a C3D newbie who used ground survey points (Serrano_EG_surface) that generated a Civil 3D surface. The white line is consist of arc segments that I turned into polylines and then into individual CL alignments. The first alignment ,which has its left and right offsets do not generate the profile view that I needed to be created. There was a prompt asking for a profile to choose, but I don't know where in the drawing or in the propector panel to click on.
1. Are the ground survey points good enough so that any alignments over the those areas can provide me a surface profile, a design profile, cross sections every 50 feet, so that I can submit a preliminary drawing for environmental permitting. ?
2. When I check the object browser, the aligments preceding each other are not in the same elevation it seems. Do I have to to transform each of the polylines first into a 3d polyline and then an alignment so that I can create a profile.
3. Eventually , I wish to connect all these alignments to model a 1.5 mile rural road (more like an access road to a water reservoir).
4. What's a best techniques to keep track of modeling a road.This question pertains to e.g the object browser as one of the useful aid. I've also used the inquiry tool but not used it for its full potential.
AutoCad :: Profile Move From Old Domain To New One
Feb 12, 2013I have a question about moving a AutoCAD profile from a old domain to a new one. We have setup the new domain account to use AutoCAD but none of the settings transferred over. Would the settings still be saved on the old user account?
This is AutoCAD LT 2005
AutoCAD Inventor :: Insert Sketched Symbol At Center Of Part Via C#
Feb 14, 2012I'm currently trying to automatically cycle through all the parts in a given assembly within a drawing and place a sketched symbol at the COG of each part using C# (Visual Studio Express 2010 with Inventor 2012). The main code snippet is as follows:
//'Sketch Symbols
SketchedSymbolDefinition symDef = oDoc.SketchedSymbolDefinitions[1];
int i = 1;
while (i <= oBOMRows.Count) {
BOMRow oRow1 = oBOMRows[i];
ComponentDefinition oCompDef = oRow1.ComponentDefinitions[1];
[Code] .....
I've tried several routes, but this is my basic approach. I feel like I am missing some GeometryIntent or something of that nature as the Sketched Symbols are showing up at the correct position but they are not associated with the given part (I've attached a screenshot of what is currently happening - the wipeouts you see should be displaying a property in them that is associated to the part). I also do not want the leader to be visible.
AutoCAD Inventor :: Insert BOM Into A Part Drawing That Doesn't Reference Itself?
Jun 28, 2012This is something that I have tried to understand and find a work around since I started working with Inventor. Is there a way to insert a BOM into a part drawing that does not reference itself? When we create parts they are cut or machined from a designated material (size, shape, etc) which has it's own part number, one that we have to manually enter into the drawing BOM with it's description. Is there a way to attach this raw or base material to a part file as a subordinate part that can be seen in parent assembly's BOM's?
If there is a way to attach a raw material to a ipt's BOM that can be seen at all levels above it we could explore the option of streamlining our BOM creation process.
IV 2012
Running on:
Windows 7 64 bit
12 GB Ram
Intel Xeon processer