Is there a way to associate layers to materials so when they are placed in a drawing they are automatically placed on the proper layer. I have line weights set for each individual layer and would like each material component to have its own line weight.
View 9 RepliesI have created some furniture families and loaded them into my project; however, How to assign them a material or color.
View 2 Replies View RelatedI've bought a 3d model and i need to assign materials and lights and so on. the problem is that when i open it i get this (the picture below) I had the 3ds Max 2014 before, now i've installed 3ds Max 2013, 64b windows.
View 3 Replies View RelatedAfter all this time is there a way to assign layers to different objects with a block? Perhaps using Visibility states or Lookups?
As an example:
I have a dynamic block with a door swing and text. As I increase the size of the door the text changes to reflect door size. The objects are all on the 0 Layer. When I insert the block I can assign a 'Text A' Layer to the text and a 'Door A' layer to the door. So when I switch layer states around I will either see the door, the text or both. Then I move to the second floor which has been stacked on the first floor. I insert my DB and assign layers 'Text B' and 'Door B' respectively to the text and door.
Finally when I go to my layer states I either select 'First Floor' or 'Second Floor' and the respective blocks appear depending on the layer state.
Is it possible to assign materials to layers?
View 2 Replies View RelatedIs there a function or script that lets you automaticly apply materials to layers by name? Lets say I import a DWG that has 3 layers. Layer 1, 2 and 3 but no materials. I have 3 materials in my scean that are called 1,2 and 3. Is it possible to have all the objects in layer 1 to get material 1 applyed, all objects on layer 2 get material 2 and so on without manualy applying to each layer. For example if I have 100 layers and a 100 materials it would be a hastle and take long. I'm thinking there might be a script or function for this. I have looked but not found one.
View 3 Replies View RelatedI want to have my assembly parts on different layers such that part 1 is on layer 1 and part 2 on layer 2.
I know how to assign a line type and color to a part but this gets laborious. It would be far easier if I could apply an electrical layer to all components w/ an electrical property. How to do this?
I'm running 2010 standard.
i was wondering if there is anyway to assign a layer to each type of material used so that i can have the material shown in different colors on my drawings?
View 2 Replies View RelatedI'm trying to re assign XYZ planes after the drawing is complete. I understand changing the view cube etc, but I need to change the sketch itself to match the view cube to set up machining on our CNC and minimize material waste.
View 3 Replies View RelatedI am running Autodesk Inventor Professional 2010. I use FEA a lot on steel and aluminum structures but was wondering if Inventor is capable of doing FEA on composite structures. I personally want to estimate the strength of some carbon fiber tubing but wasn't sure whether or not I would be getting good data from it. I know that composites don't yield and was wondering how or if that will affect anything. Also, if you can do an FEA on a composite, any solid website to get material properties from?
View 3 Replies View RelatedAll of a sudden, I have very limited selections for part color and material. What setting has changed that causes this?
View 5 Replies View RelatedI came up with 2 questions related to my Inventor 2012 install :
1. Is there a way to install only Showcase 2012 from install kit if on fist "session" I've unchecked it from customize-installation? How ?
2. Can I add new materials to library ? If so is there a website with samples to upgrade inventor material library with new ones?
Is it possible to assign keyboard keys (or joystick control) to drive constraints either in a model assembly or in the dynamic simulation environment?
View 9 Replies View RelatedI am almost sure this is not possible in AI but I will ask it anyway:
is it possible to assign value of parameter as a result of non linear equation?
for example I would need parameter x to meet the equation
cos^2x+Ax+C=0
where A and C can be other fixed parameters.
Currently working on a PowerPoint styled animation.I've parented the source text of 5 text layers to 1 text layer so I can easily alter the text. It is essential that I have 5 identically texted layers.
My requirement isn't much: To assign colors to individual words without having to separate those words into different layers.
I have an assembly (A) that has a subassembly (B) that has a pattern of subassemblies (C's) that consist of many parts (D, E, F, G & H). The parts (DEFGH) are steel and have their own drawings. They do and should look like steel.
They are welded together as an assembly (C). This will be painted bright yellow. I wish to assign a yellow appearance to the subassembly, not affecting the parts. Last, when I open the upper assemblies (A or B), I expect C to have the painted color. I cannot make this work in Inventor 2013.
I can assign appearances to parts DEFGH. No error there. I can NOT assign appearances to assemblies (C). The only thing I see in the Appearance box is "Favourites" and "Inventor Material Library".
I can individuall select and highlight parts DEFGH inside the assembly C and assign an appearance to them. Sort of a work-around, but...
...this is not carried through to upper assemblies (A or B). If I just open them, all items are steel-colored, not yellow. If choose to edit one of the patterned C's inside B, only that instance is colored. None of the others in the pattern.
I must thus expand every instance in the pattern and highlight every part and set an appearance. But this is still not carried through to A. Or any of several other assemblies that also contain B.
Thus, if I want a persistent coloring, I either have to "paint" the individual parts, or I will have to scour up each and every assembly and "paint" every part inside them.
Is there really no way to assign an appearance to an assembly and have it carried through automatically to all assemblies that contain it? Like in every other solid modeler I have ever used?
Could you tell me or give me a link to the procedure to migrate the materials library. I have a materials library that I created in 2012 and I would like to migrate it to 2013.
View 4 Replies View RelatedI have successfully opened a STEP file from our Engineering group and saved it away as an Inventor Assembly. I would like to define Materials and/or Surface finishes for all parts. Why wouldn't the Surfaces and Materials synchronize between the Styudio's Surface Creator and the BOM Materials Control in the Assembly area?
I have found the way to define a new Surface in the "Inventor Studio" Interface and saved it with a unique name. Now, I would like to assign that Surface as a Material to the parts in the assembly ... and of course I would like to define numerous other surfaces and materials for assignment to all the parts throughout the assembly. Finally, I would like these surfaces / materials to follow the model into Showcase for presentation purposes.
Is it possible to change materials mid animation in inventor 2012? Essentially, im looking to rotate a camera arround an assembly,make the enclosure glass and do it again.
Additionally, Is there a way to use animations already created in an ipt file (using the same model) in Inventor Studio?
I am lookng for a way to allow multiple material selections for a drawing/model
We have components that avaialable in both 304 and 316. We have seperated stock codes for each of the selections what I would like to do is to come up with a way that I don't need multiple models of these features. The deisgns are virtually the same except for the material change.
In previous cad systems I used a tabled system in the model that would allow you to vary paramters such as Iproperties or even dimensions in one model.
This elimated duplication of work includeing double maintenance for the models?
Two questions.
Is there a way to add new materials to physical properties?
Is there a cloud feature in Inventor for drawings, or is that something that can only be done in Autocad Mechanical and Mechanical Desktop?
I am trying to load CATIA v5 files into Inventor 2013, which works great. However, the materials applied to the object in CATIA are not being imported. Instead the colors from the "Properties" dialog in CATIA are being applied. Is it possible to somehow maintain the materials? Since the constraints aren't imported either, I would have to reapply the materials for every position of this certain object (for renders), because adding the constraints in Inventor is too much work to be doing again.
View 1 Replies View RelatedHow Import materials.xml to Inventor 2013 materials library used API ?
View 1 Replies View RelatedI'm trying to create a custom Content Center bolt that can be one of three different materials (6.8, 8.8, 10.9). The materials are stored in our Styles Library, and the project specifies "Use Styles Library = Yes"; so the three materials are visible from the Content Center Editor. The Material column in the Content Center Editor is defined to "Map To Inventor Property: Project.Material". Everything looks fine. But no matter what material I select, I get 6.8.
I've already got LOTS of parts published with custom materials and they all work fine, but the big difference is that these families are all the SAME material. I'm having problems with getting a family to use DIFFERENT materials. We're using Inventor 2009.
When i use the BOM feature, i get a list but cannot get panel sizes as dimensions in a table. I can get a part ID and other not so important in for for a BOM but dimensions and sizes should be key.
How can i get a detailed BOM to include panel sizes (like a cut list).
I'm in the process of modifying our materials.xml file within the: Style and Standard Editor [Library - Read/Write]I can add materials no problem but:
* When I make an attempt to rename a material, a new material is created with the new name, and the material I attempted to rename is still there with the old name.
* 90% of the time "purge style" is grayed out. When I have the chance to use "purge style" it doesn't work. Purge style and sub-styles doesn't work either.
How do you delete materials from materials.xml?
I am seeing this "varies" message on certain items in my BOM but can't tell where the incosistencies are. The strange thing is that my part number LCVINYL is showing the correct length of material while the Unit Quantity is showing "varies". Normally this would make me think that the inconsistency is in the name only. Where should I be looking to correct this?
BTW all of these LCVINYL parts were created in the frame generator if that matters.
It would be nice to add materials to assemblies..(under the physical properties tab)I see it can be done only if it was a 'weldment' under the weld bead properties, but in weldments you cant have positional reps.
View 9 Replies View RelatedI changed the names and locations of my parts in an assembly, opened the drawing, and found all of the parts and names. I then looked at the parts list on the assemblies in the drawings. Even though the assemblies updated, the part name did not update. How do I update the BOM to match the assembly (I thought it would do this automatically?)?
View 2 Replies View RelatedI have a need to send files saved from Inventor.dwg to AutoCAD.dwg to suppliers, however due to the quantity of files "size", I need to purge them in Autocad before I e-mail. The problem I have is that my template Inventor.dwg is 1 mg due to Sketch Symbols, plus added file size for the views etc. When I get to Autocad to purge them, my Sketch Symbols and Title Block is on the "0" Layer. I have to select everything that is on the "0" Layer and change the layer to a different layer to start a LISP routine that does a, Erase All, Purge All, to get my file size down. I have not found a way to change the layer that Sketch Symbols are created on or reside on by default or Title Block either.
Any way to do this Inside the Sketch Symbols, inside the Title Block, using the styles, anything?
I am just now going through a iLogic course and read that Layers can be hidden. Can iLogic be used to change the layer of "SketchSymbols" or "TitleBlocks" and or used to purge all Sketch Symbols during the SaveAs to Autocad.dwg process?
I have attached a screen shot. I created this base plate as A572-50 steel and it is displayed as galvanized. The only thing on this assembly that is from the content center are the bolted connections and a few pieces of A53 pipe that is not shown in the image. All of the other parts and sub- assembly's and their parts are created with their appropriate grade of steel and also displayed as Galvanized. When they are place into the same assembly their materials and display are exactly like they are on the part level itself.
When I place the base plate from my project the initial preview of the the part shows it to be as it is in the part itself, A572-50 and galvanized. The problem comes when you actually drop it in the assembly. The material of the part is reverted to the Steel, Galvanized and is displayed as Generic. This causes a problem in my BOM and then some.