In CS6 Bridge it shows an image that has been first time imported and put thru raw and photoshop. that the process version is 6.7. Should that not read 7.1. Images taken on canon EOS 450D
View 14 RepliesAfter opening Bridge CS6 (and using mini Bridge), there are no thumbnails showing. I've pointed Bridge to just one folder with less than 5 photos in it and it cannot even display them. I'm running a recent Mac Pro with 16GB RAM and kick graphics card.
View 4 Replies View RelatedJust installed acr7.3 and cs6. I have previously saved jpgs but wanted to play with POSSIBLE settings in the new ACR. Ok so I make some changes and only say DONE.. I do not open and resave. Going back to Bridge.. the preview now shows me the 'new' acr tweaked version and that jpg will NOT open in CS6 again without going through bridge to apply the tweaks I made.
Problem is, the jpg itself is still saved the OLD way and I want that version back. How do I get the bridge to show the saved jpg that I have, once I play with it in acr??
I haveElements 9 and CC on the same computer. When I click to open images from Bridge, 9 is shown as the Default and CC is not shown. How do I eliminate Elements 9 as the Default?
View 1 Replies View RelatedI was pleased for the first time ever to see some yellow labels created in Bridge retained after an import into LR.
But before I got too happy, I then noticed (and this is why I'm writing), that the red labels I created in Bridge are not there only the yellow ones.
Anything I can do to have LR show all the colors?
LR 5.0
When I bring in a .sat file, I see these little "i" in the browser. The red Cross is dimmed. If I hover over the icon, it doesnt tell me anything. I can right click on Base2 and choose edit solid, and the "i" goes away, but something is still not right. I know something is wrong, because the mass is not correct for this part.
Notice the green check by "Base 3"? After I edit "Base 2", I do not have a check by it.
How do I get this to report the mass correcly.
Previously i`m using version 2009 and importing Google earth image and surface works fine. However, recently i tried with version 2010 and i`m having some problem here (imported surface / contour seems ok but the image is too large like 3x or 4x). How to solve that?
View 3 Replies View RelatedUsing: CS6, Win7
After an external backup drive had its partition deleted we used recovery software to get as many files back as possible. It sorted the files by types but gave them all numbers for names. Using bridge to preview the illustrator files, most show a thumbnail, some just a small illustrator icon. When I try to open the files, some open no problems.
Some of the files are collections of vector art (multiple clipart in one file). In the preview that Bridge shows, the file is complete and all art is there. When I try to open some of these files, I get error messages like:
"Can't open the illustration. The illustration contains an illegal operand.
##.####.##
%##.####.####.###.....etc."
And when I click "OK" the file is either missing some of the artwork or it is completely blank. How does the preview show the complete file and when opened it's either missing elements or blank?
LR 4.6 shows wrong Date (1988-02-07) and time after importing. Explorer shows the exact date and time of craeting the file. File type is MOV, camera Leica M (240).
View 1 Replies View RelatedI am working with something new in AE this week and I am curious if I am doing something wrong. I need to insert a 3D thumb tack PSD file I imported into AE with a film I am working on. As a test I just wanted to see what quailty the pin would render out for the final because the preview in AE looked horrible. So I have a static shot of the Thumb tack and it is going for 10 seconds. I started the Render and it has been going for 9 minutes so far and still shows 1hr 28 minutes left. I've rendered 8 minutes music videos in 45 minutes on this same PC.
I am using a PSD for 3D because I do not have 3D software.
Video files from an iPhone 4S (5.1.1) are transferred onto my Mac (this story is true under 10.7.4 and under 10.8) via PhotoSync. In Finder, the files reflect the correct creation date. On importing the files to Aperture, the correct capture time and date is shown in the metadata. On importing the files to Lightroom 4.1, however, the capture time shows as plus-five hours from when actually shot. I can't think of any setting I might have tripped in Lr to cause this to happen on import (I understand how to manually change the capture time).
View 17 Replies View Relatedi used photoshop to design the website sliced it with image ready and imported as html..but then i check out the website some of the image is pixelated..how can i fix it.to view it as the same thing as i see it in photoshop while designing?
View 9 Replies View RelatedOriginally, I'd used linear transparency on image#1 which caused a line that showed up only on a Ricoh-generated hard proof. I kept the transparency of image#1 and converted it to a bitmap, so no lens, but still the line. Finally I ditched the transparency I'd applied to image#1 and placed image#2 over image#1 to achieve the fade-out of image#1 that I had originally intended. Now image#2 is creating a line only evident when printed on that bloody Ricoh!
View 4 Replies View RelatedI cannot see my image after opening in PS6. The tab shows the file name and I can see the image in the tile when I go to "File-Open".
View 1 Replies View RelatedIve noticed since upgrading to CS 5.5 that when I zoom way in on an image in Photoshop, a grid shows up around the pixels at 500% + zoom. I don't mind it all that much but there are times when I don't want that grid to show. I'm sure there is a toggle somewhere in the preferences to turn this on and off completely but it would be nice to have a key command. Not sure if that exists
View 2 Replies View RelatedWell, that`s the problem. I recently changed my video card and liquify started working a different way. The video card I have now is ATI RADEON HD 5850 DDR5, 1gb. And the computer I have is:
QuadCore Intel Core i7 920, 2800 MHz (21 x 133)
Motherboard: DX58SO (1 PCI, 1 PCI-E x4, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394)
RAM: 6 GB DDR3-1333 DDR3 SDRAM
Video Card: ATI Radeon HD 5800 Series (1024 MB)
Hard Drive: 1TB western digital, 4 partitions, 73gb free space in total and 13gb free on C Drive.
Windows 7 ultimate 64 bit.
Photoshop CS6.
This are the things that happened after installing the new Video Card:
- I used to work with the PUSH LEFT tool on Brush Pressure 1. Now, to achieve the same effect (the same kind of pressure), I have to use a higher number, like 6 o 7.
- When liquifying the image at more than 100%, the image gets jagged. I can't do any precise work like this, because I'm not seeing the image correctly, the pixels are shifted, the lines jagged. If I go back to 100% the image looks normal again.
I already tried on the Preference panel to change the options of the video card but the problem persists.
I'm not sure why, but Photoshop just started doing this after I converted my files to a smart object. When I try to zoom in past 50%, it displays these transparent pixel squares over the entire image. I tried rasterizing and flatting the image back, but that didn't do anything. It seems to keep doing this.
View 4 Replies View RelatedThe image is basically a grayscale height map created from Digital Elevation Models, and exported out of another program as a 16bit tiff. I know photoshop can handle the idea of a 16bit image, but no matter what I do, these come out black. i've tried dumping it out as signed, unsigned, stretched, etc. I can't mess with things like contrast or brightness globally cause that will alter the values which have to stay the same.Basically it needs to open in photoshop cs5 as what it is and save off the same way.
I don't have any other way to do what I need to do to it other than photoshop, so if there is a way to make this work, and no, converting it to 8bit is not an option.
On Windows 7, R-clicking on an image shows "Open With" CS6 but only 64 bit opens. How to also have 32bit as a choice? Since the majority of my plugins only work on 32bit I find using 64bit unfortunately useless. Hence I wold like to know if it is possible to right-click on asn image with explorer and have it open the 32bit version.
View 2 Replies View RelatedThe Organizer thumbnails is showing broken images for some pictures, but when I look at the pictures using Windows Explorer or any other photo editing program, they are fine. I've already tried right-clicking the image and clicking "Update Thumbnail". How can I fix the thumbnails?
Adobe Photoshop Elements 11.0.0.0
Whenever I open photos from Lightroom (that already have lightroom adjustments) edit in Photoshop CC only opens Photoshop but does not open the image.
If I open Images with "Edit in Photoshop" that DO NOT HAVE Adjustments, the image will open up in Photoshop correctly. I just came from Windows to Mac.
I'm importing two separately made images to Photoshop; both made from Sketchbook Pro on the i Pad. One is a background, the other is just a doodle. (background)
(original doodle)
What I've done so far is use "Color Range..." to remove just the black, then apply the "Darken" effect within the Layers Palette.(current view)
What I must know is how to use my doodle layer as a mask; to use the texture from the background image in the doodles brush strokes, but not be seen in the areas that used to be black.
I aim to use this effect in many kinds of imported images made from my i Pad, as well as handwritten graphics. I trust this would be very simple to use with actual typed-out text, but I'm having difficulty to find pre-existing solutions.
When using ImageReady, and having imported an image to the stage...
Is there a way to update that imported image when you have made changes elsewhere, for example in Photoshop.
Sort of the sameway you can update library objects in Flash.
In the last couple of months my images have become quite red in bridge and it switches back and forth from being too red on photoshop and then too red on bridge.
View 2 Replies View RelatedIt was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
I have a 3ds model of a golf ball I purchased. It imports properly into my Photoshop CC. I haven't been able to figure out how to apply an image (my logo) to the surface of the golf ball. Also, the golf ball has a dimpled surface so I will want the image to follow the contours of the ball, as if it would look if the logo were painted onto a real golf ball.
EDIT: Also, I want to keep the golf ball as a 3d object so I can animate it in a scene.
I have an imported image that needs a 50px black frame with hard edges on the _outside_ of the image.I have found solutions but they do not have mitered corners.I cannot use the canvas size to accomplish this as the canvas contains other objects.
View 12 Replies View RelatedI am importing images saved in both Raw and JPEG format at the time of capture. There seems to be a color shift - toward green for the JPEGS and red for the Camera Raw images. Why is this happening?
View 4 Replies View RelatedHere is what I get when I try and view an image in Bridge. It has been working fine and then all of a sudden I can't view images.
View 2 Replies View RelatedWhen I open Bridge on my laptop I find that instead of images from the DNG files appearing, what I get are small icons having DNG and a camera iris. This happened after I reinstalled the CS6 program. (I managed to lose the icuuc40.dll file and received a message advising to reinstall the program).
I use my laptop when travelling. I download all files from the camera onto it and view them in Bridge. After returning home I transfer the files to the PC desktop for processing etc.. Bridge is working normally on the desktop.
when I copy it to a colored background, it then is white not transparent.
So what's the cure? Other than I shoot myself...