Ive noticed since upgrading to CS 5.5 that when I zoom way in on an image in Photoshop, a grid shows up around the pixels at 500% + zoom. I don't mind it all that much but there are times when I don't want that grid to show. I'm sure there is a toggle somewhere in the preferences to turn this on and off completely but it would be nice to have a key command. Not sure if that exists
View 2 RepliesI'm not sure why, but Photoshop just started doing this after I converted my files to a smart object. When I try to zoom in past 50%, it displays these transparent pixel squares over the entire image. I tried rasterizing and flatting the image back, but that didn't do anything. It seems to keep doing this.
View 4 Replies View RelatedWhen I zoom in, I get a grid. I click "extras" off and it disappears but won't stay off. When the grid is on and the photo is zoomed in very large, it is very difficult to see what I'm doing. Grid won't stay off. Will this be fixed in the final version or is there an option that I'm not seeing?
View 1 Replies View RelatedIf in Paper Space, entering into the viewport to zoom to a specific scale (factor), what is the easiest way to make sure I am using the correct scale factor?
ie a calculation? for example say I wanted a scale of 1:20 or 1:100?
So I'm working on a website layout this morning with parts and pieces all over my artboard. I zoom out to 25% and everything on my artboard disappears. It's still there, just not visible. I did a little tinkering and it turns out the 27% and below has this effect.
I'm using CorelDaw X6 64-bit on Windows 7.
My drawing
Zoom Window.jpg
and AFTER I zoom extents
Zoom Extents.jpg
why does it zoom IN after zooming extents?
When I Zoom in my drawing on a specific area and press F3 to come to the previous zoom level it doesn't happen. inspite of this drawing will zoom out with another sequence.
View 3 Replies View RelatedOne thing I never liked about Corel PhotoPaint X5 was that a pixel grid appeared when you zoomed in. It is possible to turn this off on a per-document basis, but not globally. Now, I see X6 still didn't fix this.
View 3 Replies View RelatedWhen I am in Survey View and hit the Z key, some of the previews are blurry. The same thing happens in Grid View. However, in Loupe View, the images are fine when I the 'Z' key. Using Survey View would make things go faster when making my picks.
I tried rendering 1:1 but the returns a mesage that says renders are up to date and rendering was done.
the pixel outline upon zoomin in cs4 is distracting for meplease help me to get rid of iti cant find how tothanxbeen trying to figure this out for some time it must/should be possible.
View 2 Replies View RelatedI hit the zoom tool to zoom in on my document. Say I want to zoom in 5 times. After zooming in once (clicking on the document once), the magnifying glass switches to the move tool cursor If I click again, slowly, it goes back to zooming.
View 3 Replies View RelatedI'm trying to zoom a photo by right clicking but the zoom icon shows only in some areas of the picture (mostly on the left side). Everywhere else, right click takes me to the next photo?
View 1 Replies View RelatedI run a HP DV6 Laptop with Core I7 and Windows 7. While editing my photos my computer appeared to over heat (which is a recurring issue that I'm working to resolve) during mid-post production. Upon restarting my computer, and when I accessed the same photos, I got a very lengthy loading icon when I clicked on a photo under the "Develop" tab. This problem recurred and in attempt to resolve the problem I decided to delete the library and re-import the files. Upon re-import, I cannot view all the photos in the library grid view. I'm not sure if my files are now corrupt from the sudden crash or is it just a data issue with LR?
I've attached a screen shot of what the problem library looks like...
RAW files (Red) no longer show their filenames in the Library Grid Compact Cells view (now just shows numbers)!
JPGs (Green & Blue) show nothing at all, including ratings and Pick status, and the Develops are gone.
This was after having imported a LR3.6 catalog and intermittently using it for a month.
Data:
- Catalog is over 1GB in size, over 50,000 images in the Library
- Windows 7 x64 with SP1
- LR4.0 x64
I have not yet tried:
- Re-importing the LR3 Catalog backup to see what happens.
- Creating a new LR4 Catalog and see if it displays the data in the Grid Compact Cells view
I have tried:
- Optimizing/Integrity Testing the Catalog
With default settings, when zoomed in and a tool is dragged while active to the top of that zoomed in section it continues upward. Is there an option to change the tools behavior so that it stops when it reaches the top of what you're zoomed in to?
My second question regards the pixel grid. When you zoom in at different degrees it displays different grid patterns. Is there an option to only have it display a grid of horizontal and vertical lines?
Of late whenever I zoom into or out of an image PS CC flattens the image without prompting. would rather it not do this. Is this a bug or have I inadvertently set some preference that is causing this.
View 1 Replies View RelatedI usually happens when I'm usuing the Ctrl+0 command. Zooming anywhere between 100-200% I'm getting this issue. Is there a reaon for this?
View 1 Replies View RelatedWhen zooming in on one image it has the same effect on all other loaded images (C5)
View 2 Replies View RelatedIs there a keyboard shortcut to zoom the image area to the image size. Kind of like the shortcut ctrl + 0 but the reverse.
View 6 Replies View RelatedOriginally, I'd used linear transparency on image#1 which caused a line that showed up only on a Ricoh-generated hard proof. I kept the transparency of image#1 and converted it to a bitmap, so no lens, but still the line. Finally I ditched the transparency I'd applied to image#1 and placed image#2 over image#1 to achieve the fade-out of image#1 that I had originally intended. Now image#2 is creating a line only evident when printed on that bloody Ricoh!
View 4 Replies View RelatedI'm currently using PSP X2 for restoring a load of 35mm slide scans, some of which need extensive spot and scratch removal. These have been scanned as 16-bit TIFF files.
PSP X2 does not offer very good 16-bit support, so I have downloaded the trial of X5, with which I'm quite impressed.
There is, however something that I cannot seem to make happen in X5, which I like about X2.
If I zoom into my image, using the Magnifying Glass tool, on X2 the image automatically re-centres the image on my zoom point, whereas on X5 I have to pan the image to bring my zoom point back to the centre of the screen. For example, in X2, if I zoom-in on a point, say, in the bottom right corner of the screen, when the image re-draws, the point I zoomed on is redrawn in the center of the screen. In X5 when I zoom in, the centre point on the image stays in the centre of the screen until I pan the image. It's rather annoying having to keep panning the image each time I zoom in and out.
I've looked at the "Preferences > General Program Preferences > View" settings and all the same boxes are ticked in both programs. I don't recall ever doing anything to enable 'center image when zooming' in X2, so I assume it to be the default condition. Where I can look for a setting that centers the image on the zoom point when zooming in?
I have a county-wide SID image file that I've attached to a street line drawing. It was working fine until this morning. Now, when I zoom in the image (all or most of it) goes completely black. Zooming into different areas of the image results in either the image being visible or blacked out...no real rhyme or reason. Of course, the area I need to address right now is entirely blacked out.
Examples attached: same scale, image is visible but then I pan to the right and it goes black....
I cannot see my image after opening in PS6. The tab shows the file name and I can see the image in the tile when I go to "File-Open".
View 1 Replies View RelatedI am having troubles plotting out of paper space. In my drawing i have an aerial photograph (inserted as a raster image) that has been scaled, rotated and shifted onto the relevant co-ordinate system. I have a locked viewport and when i zoom in or out the photo 'jumps' around in a random fashion, same when i hit plot preview it appears out of place. I was wondering what could be causing this because i thought that paper space was simply 'viewing' whatever was in model space not being physically able to shift objects.
View 4 Replies View RelatedWell, that`s the problem. I recently changed my video card and liquify started working a different way. The video card I have now is ATI RADEON HD 5850 DDR5, 1gb. And the computer I have is:
QuadCore Intel Core i7 920, 2800 MHz (21 x 133)
Motherboard: DX58SO (1 PCI, 1 PCI-E x4, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394)
RAM: 6 GB DDR3-1333 DDR3 SDRAM
Video Card: ATI Radeon HD 5800 Series (1024 MB)
Hard Drive: 1TB western digital, 4 partitions, 73gb free space in total and 13gb free on C Drive.
Windows 7 ultimate 64 bit.
Photoshop CS6.
This are the things that happened after installing the new Video Card:
- I used to work with the PUSH LEFT tool on Brush Pressure 1. Now, to achieve the same effect (the same kind of pressure), I have to use a higher number, like 6 o 7.
- When liquifying the image at more than 100%, the image gets jagged. I can't do any precise work like this, because I'm not seeing the image correctly, the pixels are shifted, the lines jagged. If I go back to 100% the image looks normal again.
I already tried on the Preference panel to change the options of the video card but the problem persists.
In CS6 Bridge it shows an image that has been first time imported and put thru raw and photoshop. that the process version is 6.7. Should that not read 7.1. Images taken on canon EOS 450D
View 14 Replies View RelatedThe image is basically a grayscale height map created from Digital Elevation Models, and exported out of another program as a 16bit tiff. I know photoshop can handle the idea of a 16bit image, but no matter what I do, these come out black. i've tried dumping it out as signed, unsigned, stretched, etc. I can't mess with things like contrast or brightness globally cause that will alter the values which have to stay the same.Basically it needs to open in photoshop cs5 as what it is and save off the same way.
I don't have any other way to do what I need to do to it other than photoshop, so if there is a way to make this work, and no, converting it to 8bit is not an option.
On Windows 7, R-clicking on an image shows "Open With" CS6 but only 64 bit opens. How to also have 32bit as a choice? Since the majority of my plugins only work on 32bit I find using 64bit unfortunately useless. Hence I wold like to know if it is possible to right-click on asn image with explorer and have it open the 32bit version.
View 2 Replies View RelatedThe Organizer thumbnails is showing broken images for some pictures, but when I look at the pictures using Windows Explorer or any other photo editing program, they are fine. I've already tried right-clicking the image and clicking "Update Thumbnail". How can I fix the thumbnails?
Adobe Photoshop Elements 11.0.0.0
Whenever I open photos from Lightroom (that already have lightroom adjustments) edit in Photoshop CC only opens Photoshop but does not open the image.
If I open Images with "Edit in Photoshop" that DO NOT HAVE Adjustments, the image will open up in Photoshop correctly. I just came from Windows to Mac.
Am trying to get an image to zoom out as need it for a particular size to fit on a webpage. Do not want to loose any part of image, just want to downsize it to appear further away.
View 2 Replies View Related