When I Zoom in my drawing on a specific area and press F3 to come to the previous zoom level it doesn't happen. inspite of this drawing will zoom out with another sequence.
View 3 RepliesIs there a way in CorelDRAW to zoom to the previous zoom position?
Is there a way to zoom to a preset zoom position?
I am having problems with zoom, pan and rotate at high zoom level. The movements becoming jerky and delayed. But for whatever reason the problem exists in some assembly files and not in the others.
View 9 Replies View RelatedI am making an animation in Inventor Studio. I have created all my sequences for fading and constraint animations, and now I only need to move the camera around my assembly while zooming in and out with focus on the animations.
The way I have done it so far, is as following: Created a camera (Camera1).Set my view where I wanted the camera to start.Rightclick on Camera1 and set camera to view.Then go in a few seconds on my timeline, move my view to a new area and finally "Add camera action". I've done this a couple of times with success, but now I can't do it again.
As soon as I move my view to another area, and press "Add camera action", it does as intended, but now it zooms out, making the animated area small and hard to see. I want it to be zoomed in on a detailed area, but it's changing the view to the whole assembly.
If in Paper Space, entering into the viewport to zoom to a specific scale (factor), what is the easiest way to make sure I am using the correct scale factor?
ie a calculation? for example say I wanted a scale of 1:20 or 1:100?
My drawing
Zoom Window.jpg
and AFTER I zoom extents
Zoom Extents.jpg
why does it zoom IN after zooming extents?
Ive noticed since upgrading to CS 5.5 that when I zoom way in on an image in Photoshop, a grid shows up around the pixels at 500% + zoom. I don't mind it all that much but there are times when I don't want that grid to show. I'm sure there is a toggle somewhere in the preferences to turn this on and off completely but it would be nice to have a key command. Not sure if that exists
View 2 Replies View RelatedWhy in CS6 when zoom changes window size and a floating window fits in Photoshop window or on other display screen do I get scroll bars where a select all selection marching ants are not visible on all four sides till I drag out the window to get rid of the scroll bars so I can see all of marching ants.
In previous versions of Photoshop space for scroll bars is present but there are no scroll bar, select all marching ants are visible on all four sides when an image's window fits in Photoshop window or on second display. Is there a way to make CS6 work like previous versions? Also if I just open a document and Photoshop fits it to Photoshop window or second display the floating window is correct without scroll bars.
if you have used CS6 you may have noticed the Applications bar was removed. According to Adobe it was removed to make more vertical "real estate" for the workspace which makes no sense. When maximized it uses zero additional vertical space but that's another argument.
As part of the Applications bar, there was a drop down menu for a few preset zoom levels. 25, 50, 100 and 200. I got addicted to using this drop down for the work I do in PS and specifically 100 and 200% as I'm also zoomed in make minor changes and I want to jump to 100 or 200% to see what the changes look like at size or zoomed out.
drop down menu like that for zoom in CS6? I know the original shortcut ctrl-1 was for actual pixels but I have that and all the other keys close to the left ctrl/shift/alt used for other functions. I rarely take my right hand off the mouse as I work and that was the best way for me to zoom quick to 100%.
I've got a question that I'm sure has a very simple solution but I can't find it even though I've searched all over the place. Is there a way to change the default zoom level when Photoshop opens an image? I'm using CS2 on OSX (though the screenshots I've included to illustrate what I'm asking are from Win XP).
View 3 Replies View RelatedNow that the application bar has been dropped from CS6, the zoom level feedback is also gone in full screen mode. It would be nice to see zoom level feedback similar to how Pixelmator displays the level with each zoom in or out in the center of the frame.
The UI device is similar to the feedback that the new crop tool displays to show the changing image size.
Been using Xara Xtreme Pro 5 for several years and this is an issue that happens now. Parts of lines disappear in a drawing at different zoom levels. The drawing might look perfect at one zoom level, but if I zoom in from say 100% to 500% parts of lines disappear from the drawing. The fix is usually having to click on the line or zoom to a different %. I have attached a picture to show the issue. The hat on the left shows the missing part of the line (circled in red), and the hat on the right shows how the line actually is.
If this was happening in a pc game I would describe it as clipping. I'm on a Pentium 4 PC 3 GHz, Win XP SP 3 2 gigs of RAM. GeForce 6200 if this comes into play .
regain the upper menu icons from CS5.
View 21 Replies View RelatedI'd like it, if an image is re-sized to the same percentage as the current zoom level, afterward the zoom is automatically switched to 100%
Typically, if I have an image too big for it's intended use, I'd adjust the zoom until I get it to appear the right size, then resize it to the zoom level. (I imagine many people do the same thing). However, after resizing, the view of the image is really tiny, since the old zoom level is now being applied to the smaller image.
I hit the zoom tool to zoom in on my document. Say I want to zoom in 5 times. After zooming in once (clicking on the document once), the magnifying glass switches to the move tool cursor If I click again, slowly, it goes back to zooming.
View 3 Replies View RelatedWhat is difference between Text Tool used for paragraph text with pressing left click mouse in x5 and inserting placeholder text in x6.
View 1 Replies View RelatedHow do I get my text from my TextBox1 (add text) by pressing my CommandButton1 (okay) to my active page or document?
View 1 Replies View RelatedI have a user in my group that is hesitant to upgrade to 2012 because , he has many lisp routines that are associated with the PREVIOUS selection feature. This selection is very useful in that when you are moving or selecting many objects you can enter P for previous and the object will be selected.
In 2009, when you select objects then hit escape, then try to execute a command requesting to use the Previous, AutoCAD will remember the last selected object and then highlight it.
In 2012, when you select objects then hit escape, then try to execute a command using P for previous, it will not highlight the previous object selected but will highlight the previous object where a command was executed on.
Hope I haven't lost you. It seems there should be a setting under SELECTION of how to manipulate the Previous selection feature.
Where can I change that scrolling the mouse wheel moves me up and down the page instead of zooms in and out? I want it as it was in X5 (I may have changed some setting there, but that I have forgotten).
View 8 Replies View RelatedIs it just me or did they not fix the zoom out with the update for CorelDraw? on large drawing you can't use the mouse wheel to zoom out, and if you try to drag a object of screen it doesn't flow it.
View 7 Replies View RelatedUsing x3 on imac in windows 7 and it keeps zooming in and out when you click on text etc ?
View 1 Replies View RelatedArtwork disappears when zooming in and out in corel x6 then have to close file and reopen
View 10 Replies View RelatedI am using Corel X5 and need to save back to version 10 or 12. Even though I change the settings when I "save as" the file remains an X5. Unfortunately the engraving company I use cannot open the X5.
View 3 Replies View RelatedI used to have x4 . One of the features I like is wherever you place the cursor and use your the scroll wheel on the mouse, it will zoom in where the cursor is.
When i switched to x5 , it doesnt center to the cursor. Is that a glitch? is there a way im doing it wrong or any setting i need to fix?
So I'm working on a website layout this morning with parts and pieces all over my artboard. I zoom out to 25% and everything on my artboard disappears. It's still there, just not visible. I did a little tinkering and it turns out the 27% and below has this effect.
I'm using CorelDaw X6 64-bit on Windows 7.
I remember back in 8 or 9 when you could use the scroll mouse to "scroll". But in 11 or 12 it changed to "zoom".there is a way to change it back to scroll?
[URL]
I cannot save my previous files created on a student version to an upgraded 2014 version. I tried changing the save as path in the options menu, but no luck. I am able to open the file in the upgraded version but it states that it will open as a student version. Also I cannot copy and paste anything from the student version to the upgraded one. Not sure why.
View 4 Replies View RelatedLevel Equalization was a tool that I used constantly in PhotoPaint 8. By version 10, it had disappeared for no obvious reason. It was a really vauable tool. Fortunately, I still have PhotoPaint 8 on the system, but it tends to introduce other problems, so I rarely go back to it. It would be handy to have that tool back. X3 has something called Local Equalization and another option called Histogram Equalization, neither of which seems to do anything useful.
In fact, both Histogram Equalization and Local Equalization thoroughly screw up any image that I test on them. I don't have a clue as to why they are even there, since they absolutely don't work, whereas the original Level Equalization worked really well.
I have a client, who have a CorelDraw X6 software. After a virus attack I try to reinstall and upgrade to the software. The installation went well, but the the 4th update has failed:
View 3 Replies View RelatedI am having a little trouble with some doors showing up on the level 1 door schedule that are actually on level 2. They are curtain wall doors.
View 6 Replies View RelatedI am trying to adjust the noise level with the level tool but its not working. I move the arrows every which way see that it changes. I get it to were i want it them press ok and it only changes a little bit.
It become what it was in the preview. The level tool works when I add it as a new adjustment layer but I don't want like that I want to be able to copy the new level of noise I just made and can't if I add new adjustment. what should I do to fix this? O and this is the trial version and It wasn't working earlier with lots of other tool but i uninstalled it and now they are working except the level tool how I want it to.