Photoshop :: Liquify Shows Jagged Image When Liquifying At More Than 100%
Mar 3, 2013
Well, that`s the problem. I recently changed my video card and liquify started working a different way. The video card I have now is ATI RADEON HD 5850 DDR5, 1gb. And the computer I have is:
QuadCore Intel Core i7 920, 2800 MHz (21 x 133)
Motherboard: DX58SO (1 PCI, 1 PCI-E x4, 2 PCI-E x16, 4 DDR3 DIMM, Audio, Gigabit LAN, IEEE-1394)
RAM: 6 GB DDR3-1333 DDR3 SDRAM
Video Card: ATI Radeon HD 5800 Series (1024 MB)
Hard Drive: 1TB western digital, 4 partitions, 73gb free space in total and 13gb free on C Drive.
Windows 7 ultimate 64 bit.
Photoshop CS6.
This are the things that happened after installing the new Video Card:
- I used to work with the PUSH LEFT tool on Brush Pressure 1. Now, to achieve the same effect (the same kind of pressure), I have to use a higher number, like 6 o 7.
- When liquifying the image at more than 100%, the image gets jagged. I can't do any precise work like this, because I'm not seeing the image correctly, the pixels are shifted, the lines jagged. If I go back to 100% the image looks normal again.
I already tried on the Preference panel to change the options of the video card but the problem persists.
View 2 Replies
ADVERTISEMENT
May 20, 2013
I"m using photoshop cs5 and the liquify filter dosen't show any effect until after I've clicked ok. I've checked, and unchecked "show backdrop" and the opacity is set to 100%.
View 1 Replies
View Related
Dec 17, 2012
In Kelby's "Hidden Gems" of CS6, he converts the image to a smart object using the filter menu "convert for smart objects" before he uses the Liquify filter, thus adding a Liquify mask and the ability to go back and edit Liqify. When I open a Raw file and convert to smart object, it greys out the Liquify filter.
Liquify is only available before adding the smart filter. What's wrong with this? I'm on a Mac 10.8.2
View 4 Replies
View Related
Dec 28, 2012
How does one go about liquifying an image layer that has a mask on it? I'm liquifying the edge of the mask so I want the mask edge to move with the liquify. Is this possible?
View 1 Replies
View Related
Apr 3, 2008
I am creating an image border using the rectangle marquee, and making it jagged by applying a Stylize > Wind filter to it.
Using Wind there is no way to adjust the jagged edges, is there any kind of third party plugin that gives me more editing features?
View 1 Replies
View Related
Nov 12, 2012
Brand new MacBook Pro - Non-Retina - OSX 10.8.2 / 2.6GHz Intel Core i7 / 8GB RAM / 750GB HD (currently 522GB free space) / CS6 Extended Version 13.0.1. x64
I just got a new MacBook Pro this past week and immediately discovered that whenever I would try to move around on a zoomed-in image (using two-finger scrolling on my trackpad, as I've done for years), it would be very choppy/jagged/sort of jumping pixels. I've changed everything in Photoshop--Preferences--Performance multiple times (including the graphics processor settings, memory usage, history & cache), as well as all of my scrolling and trackpad settings, and have also tried with and without automatic graphics switching.
I have this issue in both CS6 (downloaded directly from adobe.com last night, extra updates done immediately), and CS5. I tried CS4 and there was no issue...but I didn't get a brand new computer to use an old version of Photoshop. Went into the Apple store today to see if they've seen this issue before, but the person I spoke to had not (and knew nothing about Photoshop...not that I expected him to).
I have a few friends who have this same problem - some just deal with it (or don't use Photoshop enough for it to be a bother), some have gotten their computers replaced (but with no actual answers). Apple wasn't convinced that this was a hardware issue in my case, but did offer to replace the computer (however it will take a couple weeks, as it's a custom order). I've spent countless hours searching these Adobe forums (and the rest of the internet) for insight.[URL]...
This happens on ALL images, regardless of file type and size (the image shown in this video is just a jpg with no extra layers - working on RAW files with multiple layers produces the same result, no worse). And once again, I have changed everything in the Performance Preferences in PS (including the graphics processor settings, memory usage, history & cache), as well as all of my scrolling and trackpad settings, and have also tried with and without automatic graphics switching in my energy saver preferences...all multiple times, all with closing/reopening PS, all with restarting my computer afterwards. Have I missed something, or do you guys think it is more than likely a hardware (RAM, graphics card, etc) problemHere is my (current) system info - again, I've changed the PS performance preferences multiple times -
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Mac OS 10.8.2
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
View 3 Replies
View Related
Jan 15, 2013
Here's a strange situation. 3 of my students have had the Pucker and Bloat tools in Liquify tear holes in their images. I mean really pucker so hard that transparent pixels appear at the liquify point. Their tools were set on the defaults -- not overly strong strength or rate.
What gives? All 3 of the culprits were on Windows machines... (Mid 2011 imacs with Windows OS). The students on Mac had no problem.
Oh, also one of the students with the problem was having it so strongly that the Liquify tools were actually creating tiny copies of the whole image *inside* the torn "holes"-- as if the image is being turned inside out!
Edited to add: I've noticed another couple of weird things with those machines having this problem:The Reconstruct tool and Reconstruct button also cause the holes to be torn... but with those tools, the holes are repeated like the run in a nylon.
View 2 Replies
View Related
Jun 9, 2012
All of a sudden, when I try to use Liquify in CS6, I get the following warning:
"Liquify is capable of utilizing the Graphics Processor on RGB files to increase performance. The color mode you have chosen will not utilize the Graphics Processor."
If I click OK and continue, the image is just blank inside Liquify. It used to work just fine. I am in ProPhotoRGB colour space.
View 2 Replies
View Related
Jun 26, 2013
I've installed PS CC and have an AMD Radeon HD 7970M card in my laptop. PS detects the card in Preferences and I'm able to choose it for acceleration (i.e. OpenCL, etc.).
When I try and go Filter -> Liquify on any image, the Liquify dialog pops up, but i don't see the image. All I see is a black in the dialog.
When I turn off acceleration, and go to Liquify, it works.
View 1 Replies
View Related
Aug 2, 2012
Can not view image at full size when in liquify. e.g. the image is much smaller when you select liquify and when you enlarge it it pixelates. Is there a adjust or is something wrong with my Elements?
View 10 Replies
View Related
Apr 30, 2013
I just installed Photoshop through Creative Cloud and my Liquify filter screen is totally black and doesn't show the image. You would think the default setting would be to show the image or layer,
View 3 Replies
View Related
Sep 1, 2013
Im using Adobe Photoshop CC. Everytime I click Liquify a black screen appears instead of the image.I'm using Dell Inspiron 5520.
View 1 Replies
View Related
Mar 25, 2013
Curser is dragging across the image and distorting even when not clicking on it. is the proxy image in the dialog box adjustable? the resolution is to hight. I have 16G of ram so thats not the problem. (it works ok on smaller low res images)
View 9 Replies
View Related
Oct 17, 2012
This image appears to have jagged edges on all of the paths. I created outlines for the text and converted strokes to path, but i can not seem to figure out how to make the image's path edges appear smooth. The image above is a png file but the image still appears this way when i view the ai version in illustrator.
View 10 Replies
View Related
Jun 4, 2013
Originally, I'd used linear transparency on image#1 which caused a line that showed up only on a Ricoh-generated hard proof. I kept the transparency of image#1 and converted it to a bitmap, so no lens, but still the line. Finally I ditched the transparency I'd applied to image#1 and placed image#2 over image#1 to achieve the fade-out of image#1 that I had originally intended. Now image#2 is creating a line only evident when printed on that bloody Ricoh!
View 4 Replies
View Related
Jun 26, 2013
I cannot see my image after opening in PS6. The tab shows the file name and I can see the image in the tile when I go to "File-Open".
View 1 Replies
View Related
Nov 27, 2012
Ive noticed since upgrading to CS 5.5 that when I zoom way in on an image in Photoshop, a grid shows up around the pixels at 500% + zoom. I don't mind it all that much but there are times when I don't want that grid to show. I'm sure there is a toggle somewhere in the preferences to turn this on and off completely but it would be nice to have a key command. Not sure if that exists
View 2 Replies
View Related
Jul 17, 2012
In CS6 Bridge it shows an image that has been first time imported and put thru raw and photoshop. that the process version is 6.7. Should that not read 7.1. Images taken on canon EOS 450D
View 14 Replies
View Related
Oct 26, 2012
I'm not sure why, but Photoshop just started doing this after I converted my files to a smart object. When I try to zoom in past 50%, it displays these transparent pixel squares over the entire image. I tried rasterizing and flatting the image back, but that didn't do anything. It seems to keep doing this.
View 4 Replies
View Related
Sep 13, 2012
The image is basically a grayscale height map created from Digital Elevation Models, and exported out of another program as a 16bit tiff. I know photoshop can handle the idea of a 16bit image, but no matter what I do, these come out black. i've tried dumping it out as signed, unsigned, stretched, etc. I can't mess with things like contrast or brightness globally cause that will alter the values which have to stay the same.Basically it needs to open in photoshop cs5 as what it is and save off the same way.
I don't have any other way to do what I need to do to it other than photoshop, so if there is a way to make this work, and no, converting it to 8bit is not an option.
View 17 Replies
View Related
Sep 6, 2012
On Windows 7, R-clicking on an image shows "Open With" CS6 but only 64 bit opens. How to also have 32bit as a choice? Since the majority of my plugins only work on 32bit I find using 64bit unfortunately useless. Hence I wold like to know if it is possible to right-click on asn image with explorer and have it open the 32bit version.
View 2 Replies
View Related
Sep 29, 2013
The Organizer thumbnails is showing broken images for some pictures, but when I look at the pictures using Windows Explorer or any other photo editing program, they are fine. I've already tried right-clicking the image and clicking "Update Thumbnail". How can I fix the thumbnails?
Adobe Photoshop Elements 11.0.0.0
View 5 Replies
View Related
Dec 25, 2013
Whenever I open photos from Lightroom (that already have lightroom adjustments) edit in Photoshop CC only opens Photoshop but does not open the image.
If I open Images with "Edit in Photoshop" that DO NOT HAVE Adjustments, the image will open up in Photoshop correctly. I just came from Windows to Mac.
View 1 Replies
View Related
Oct 5, 2012
Re: 2D circle jagged lines, 3D model hidden jagged lines. How do i get smooth lines?
How do i get rid of jagged lines?
Circles and diagonal lines look rubbish when i am in hidden view which i use for simple 3d black / white (i think this is the best way?).
I have tried:
- viewres (1000, 5000, 10000, 20000 sightly better)
- regen
See examples.
square with jagged lines.fw.pngcircle with fuzzy outline.fw.png
View 8 Replies
View Related
Jul 20, 2012
It was working fine. Then I just did a simple command (pattern a part) and the entire workspace blinked out. The first time it happened I hit UNDO and it was back. So I got out of the drawing and got back in and tried the pattern again. Same issue but this time when I hit UNDO it would not come back. I closed the file without saving and when I went back in the file the workspace is still nothing but white screen. In the browser everything is still visible except for those that I had already changed to invisible. I tried making an invisible to visible and nothing happened. I got out and tried opening the "old version" which should've been before any of this happened and it is also blank. I can go to an ipt or iam in the browser and hit open and it will open in another screen just fine. I just can't see my main assembly. I have Inventor 2012. It shows no errors or messages. I have even rebooted.
I looked thru the forum and found a past issue back in 2005 identical. I tried doing Find in Window on an item in the browser but for some reason that option is not even in the list when I right click.
View 6 Replies
View Related
Nov 26, 2012
when I copy it to a colored background, it then is white not transparent.
So what's the cure? Other than I shoot myself...
View 19 Replies
View Related
Nov 11, 2009
I have just started using paintnet and when i tried to print it will only print in blackand white even when the photo is colour. The print preview shows the image in B&W. How do i get to print in colour?
View 4 Replies
View Related
Oct 8, 2012
My power clip has stopped working, seems like it works, but never shows the finished image!
View 1 Replies
View Related
May 2, 2012
I have what is to me a rather large assembly. 1823 total occurrences in the active document and 700 open documents in the session.My problem is that when I open the assembly nothing shows up on the monitor in the image area. The tree is fully populated an showing visibility on all the parts.I have tried saving as a different level of visibility and still no go.
View 9 Replies
View Related
Jan 31, 2012
.jpg export screen shows a solid black area instead of my graphic image - why? but when I open the .jpg file that was exported, it looks correct (not a large black rectangle). why is the preview window in the export window showing a large black area? see attached screenshot.
View 9 Replies
View Related
Oct 27, 2003
Had a text logo created on a white canvas/background. Made the white background transparent, then placed the logo on a green web page. Traces of white appear around the text edges. Is there a way to remove the traces of the original background color that appear around text when I place a transparent GIF on a different background color assuming I don't have the original psd/png file only the transparent GIF?
View 9 Replies
View Related
