I have just started using paintnet and when i tried to print it will only print in blackand white even when the photo is colour. The print preview shows the image in B&W. How do i get to print in colour?
View 4 RepliesI have a Round Image that i want to print, however when i go to print, its too large so i fit to page, but when i do this the image goes a oval shape.
I want to keep the image as large as possible so i don't want to print on a smaller scale .
I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies View RelatedI am facing this problem that when i give plot command and preview the window it show fonts different other than my main window. Also it prints as per the preview window and not as per the fonts present in my AutoCAD model space and layout.
View 1 Replies View RelatedHow can I print & preview with a colour profile in Photoshop Elemnets 11?
Only showing print in " File "
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View Relatedwhen I copy it to a colored background, it then is white not transparent.
So what's the cure? Other than I shoot myself...
I am using CS2. when I print with preview and choose "any" icc profile, I see an off color image. This off color image is printed off color and not what I originally had. It is approximately 1/2 to one stop density lighter (and redder) and the shadows are cyan/blue, instead of neutral black.
If I choose Adobe RGB as the profile and print, the image is close but not correct. This is happening with CS2 and elements 6.
Of course the r1800 is set for ICM and off - no color adjustment.
I have down loaded new profiles, reinstalled my epson r1800, checked for missing files in CS2.
I am running windows XP Home, 2gig memory, dell xps. I have been using this system for over two years without a problem until now.
when i resize an image for example to 27 x 18 cm there is no problem however, when i try and print the image and the preview window comes up there seems to only be a tiny part of the picture visible? its basicly a tiny square in the top left corner of the preview page and its just big enough to see its a minute part of the image i want to print. If i try and print the image anyway i just get "could not start print job".I never had any issues before then suddenly a few weeks ago the problem happened in version x2 on any pictures i tried to resize and print , so i updated to x3 in the hope it would correct the error but its still there. Any setting somewhere , i tried using a trial version of a rival program and that worked fine and showed the print preview exactly how it should.
View 1 Replies View RelatedI tweaked an image in Develop and printed some 5x7s until I got it right and then went to 13x19 (first time ever using that size with my R3000). The print preview and the print were way too red. I went back to a 5x7 and it was way red as well in print preview, so I didn't print. I replaced a light magenta cart that I think ran out during the 13x19 print, and then some others that were low, and did a nozzle check and that was okay. I have spent hours looking around all of the settings (sRGB) and can find nothing that would explain what changed between my last good 5x7 print and the red 13x19. I went back to earlier versions and had the same problem. Monitor is due for recalibration, but that probably has nothing to do with it since it changed so suddenly.
R3000, LR 4.3, Win 7, NEC PA 271w
I have an image in photoshop that is currently black and white, but I would like to print in a monochromatic green, as in just #00ff00 colour; so that it prints in green and white. How do I edit the image so that it prints like this?
View 14 Replies View RelatedCan i import an image (such as a photo of a plant) into autocad and print it in colour? I can currently print the image but without colour.
View 6 Replies View RelatedWhen in print preview the image is squashed horizontally.
View 2 Replies View RelatedHow can I get my image to center in the Print Preview window? (Epson R2000, 12 x 12, borderless). No matter where or how I change the settings, the Print Preview window shows my image has been cut off on the right hand and bottom edges. Hence, I cannot get a 12 x 12 borderless image to center on a 12 x 12 sheet of scrapbook paper.
View 7 Replies View RelatedI have an image of a table but a little area is discoloured. I would like to copy or get a certain colour from this image and then paste that over the discoloured area to make the table look normal. What tool could i use/how could it be done? I did try using the Clone stamp but it didnt work as expected.
View 2 Replies View RelatedI have a jpeg image and would like to change the colour of 3 of the words on the image. The image is on a black background.
View 4 Replies View RelatedIve got an image of my vehicle that I have edited out the entire background.
Theres a small part of the car at the bottom of the front bumper (splitter) that Im looking to edit.
I'm looking to edit the colour to a black but would like to keep the colour contrasts so that it looks like it is supposed to be like it.
change the colour of this vehicle part and to keep the different colour contracts.
where you have a smaller preview image and you click it to open a larger version. I'm sure there's something super simple that I'm overlooking somehow.
View 2 Replies View RelatedI have a clipart picture, which has varying shades of black and white. How do I change the image to pink? I would like to keep the shading. Its a very intricate image of a crown.
View 4 Replies View Relatedwhen I opened up a picture I had drawn to start colouring it, it was being displayed in wrong colours.
It seems to be lighter and has more yellow and red in it.
I dont recall changing anything.
This is only how the image is displayed though when you look at it on photoshop. Because after you save it, you can open in in paint or whatever and its back to its original colours.
If i start a brand new picture from scratch, and then save it and open it up in another programme the picture is significantly darker and bluer.
So I think it has something to do with the way that photoshop is viewing the picture.
Heres an example using a random magazine picture:
Is it possible to set up a view in CPaintX5 with identical 'live' versions of an entire image or even just an object with the purpose of being able to work on either version with them set at different zoom levels, for example a 'wide shot' and a 'big close up'. I seem to recall that older versions of PSP had this facility as standard in a toggled pair of floating tabs called Preview and Image Info or some such. (I haven't used PSP for years so I might well be remembering incorrectly). It feels like it should be such a simple thing to do but it is eluding me. Of course it would be of most use as a standard feature of the Cut Out Lab but alas, no.
View 2 Replies View RelatedI've recently gotten into the craze of writing an ebook for the Amazon Kindle and decided to design my own ebook cover. The biggest problem I've come upon is the shrinkage of the image for preview purposes when people are browsing the Kindle selection.
The original size of my image is 2000 x 1200 (the recommended 1 to .6 ratio for Kindle covers). The book looks great in the original size, but when shrunk down to about 100 x 60, the text becomes pixelated. I've tried the various font styles (mostly sticking to the sans-serif), but all have the pixelated look. I use the built-in text tool for paint.net. I tried making the text as larger as possible across the book cover, but the text still looks pixelated.
Is there a plugin for text that is used for ebook covers to 'merge' them into the cover images to blend in more and not look so sharp?
Here are two versions of my ebook cover. The Original Size can be found here.
Shrunken Size:
Whenever I enable Overprint Preview Illustrator seems to add grids on/over my document.
When I disable it, it dissapears. I find this strange because to me the opposite sounds more logical.
Will these grids be printed if I choose to print?
When you convert a document into cmyk the colour picker still shows rgb. How do you pick colours using cmyk? Has it converted the pixel values into cmyk or has it kept it as rgb and somehow is converting these rgb values into cmyk for the screen?
View 5 Replies View RelatedWhenever i open up a CR2 file in photshop the screen that pops up is meant to be grey but instead it shows up black with most of the txt showing, i can still use the sliders to fix the picture but it doesnt feel right
View 4 Replies View RelatedSo I am working on this document and it has silver background. I go to print preview (Photoshop cs3 and cs4 on Vista) and I get color looking more like bronze looking but when I do print, it comes out just like it should (in working mode which is Monitor RGB with Proof colors checked).
This setting is the only one I've used to make sure image/psd looks exactly like what it should when printing. I tried the default Working CMYK with and without Proof colors but it's still showing me the bronze look instead of silver. I've looked on the net and no exact easy fix for this was found. I really really appreciate any help.
Another simple question is regarding size. I'm working on a document size of 17.5 x 8.7 inches and the actual Banners will be printed at size 175 x 87 inches (5 banners each at 35inch wide but combined into a big one). So essentially, I'm working at 10% the size of what the final print will be and my file size is 760mgs. You can only imagine how big the file would be if I work on the actual size.
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedI can't seem to click and drag an image with the mouse when using Full Screen Preview under the Edit Tab.
I see the hand icon and the scroll bars when the whole image can't fit on the screen but when I left click it's like I hit the Esc button.
Clicking the scrollbars will work but isn't as convenient. Under the Manage tab it works correctly. I have reset the workspace with no luck.
I use this feature a lot and would like to know if others have this problem.
The problem existed in X5 SP2 and now X5 SP3.
I received an Autocad file from another person, opened it with Autocad 2011 LT, and it looks fine. But when I go to print preview all the lines are very thick, making the detail of the drawing difficult to see. I've tried manually changing the lineweights but it has no effect on some of the layers. Is there an easier way to fix this other than recreating layers?
View 1 Replies View Relatedtoday I had opened my photoshop file which I was coloring ( a comic page) I allready spend 3days on this comic and I just don't wanne start over .I was working on it in CS6, As friends suggested I had opened it aswell in CS5 to try if it works there but no it didn't. I also placed it in AI, but sadly again the ugly line picture shows up .
View 1 Replies View Related