Ive got an image of my vehicle that I have edited out the entire background.
Theres a small part of the car at the bottom of the front bumper (splitter) that Im looking to edit.
I'm looking to edit the colour to a black but would like to keep the colour contrasts so that it looks like it is supposed to be like it.
change the colour of this vehicle part and to keep the different colour contracts.
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
I have an image of a table but a little area is discoloured. I would like to copy or get a certain colour from this image and then paste that over the discoloured area to make the table look normal. What tool could i use/how could it be done? I did try using the Clone stamp but it didnt work as expected.
View 2 Replies View RelatedI have a jpeg image and would like to change the colour of 3 of the words on the image. The image is on a black background.
View 4 Replies View RelatedI have just started using paintnet and when i tried to print it will only print in blackand white even when the photo is colour. The print preview shows the image in B&W. How do i get to print in colour?
View 4 Replies View RelatedI have a clipart picture, which has varying shades of black and white. How do I change the image to pink? I would like to keep the shading. Its a very intricate image of a crown.
View 4 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedI want to use a flyer created by somebody else but need to change a few items. How to do this?
View 6 Replies View RelatedI am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedI can't seem to click and drag an image with the mouse when using Full Screen Preview under the Edit Tab.
I see the hand icon and the scroll bars when the whole image can't fit on the screen but when I left click it's like I hit the Esc button.
Clicking the scrollbars will work but isn't as convenient. Under the Manage tab it works correctly. I have reset the workspace with no luck.
I use this feature a lot and would like to know if others have this problem.
The problem existed in X5 SP2 and now X5 SP3.
Illustrator cs6 - I have used image trace to create a 3 colour image of a photograph. Is there a way to create layers based on the three colours? (One layer for each of the three colours)
View 2 Replies View RelatedI am new in paint.net. I tried "red-eyes-effect" but the red eyes turn into blue or grey instead of black.
View 4 Replies View RelatedOK so I may be a bit slow, but! I've installed PSPx6. Setup my plugins etc. Even got my workspace to load and work! Only thing now that is bugging me is the background colour in the Edit window. I use the dark grey. In x5 the background to a photo in Edit mode matched the dark grey of the UI. Now in x6 it seems I'm stuck with the dark grey UI and a light grey background.
Am I missing something some where or is this option gone?
Apart from that x6 loads in 5-6 seconds. Good. Everything else 'seems' to be faster. (I'm using 64bit). BUT Adjustment layers are still slow
I have a picture of a shovel of which I want to change the red colour to blue.
What is the simpliest way to do this in Paint.NET?
I have tried many things things, but I get a lot of trouble with shadows and sun shine areas.
Attached Thumbnails
I was watching a video on youtube when a came upon a brush set called lens flares, since I already had the Custom Brushes Mini plug-in, I was amazed by the lens flares. So then I went to Brusheezy(Dot)com and searched lens flares, there was a brush pack that was the lens flares I was looking for, so I did the process so I could use them, but then when I went to use the magic wand tool, and delete the black colour for it to be transperent, not all the black was gone, I tried changing the tolerance to remove more black, but it wouldn't budge.
View 2 Replies View Relatedif there is a plug in that will allow me to save 256 Colour bitmaps? The reason I ask is because I am trying to make map tilesets for a particular game that I like to play and they have to be 256 colour bitmaps. I know I could use GIMP, but I don't find it very user-friendly.
View 5 Replies View RelatedI would like to have my image black and white apart from a specific section of the image,For example: A football pitch in black and white, apart from the football which remains in color, See link for an example: URL....
View 4 Replies View RelatedI have a question about the picture below, which is a cycling stage profile:
As you can see, the 3D background color reflects slope. Steeper parts are a darker kind of grey than the flat parts.
I would like to create profiles of my own in the same style, with the slope of a portion reflected in its color, so I was wondering if there is a feature in paint.net that allows me to change the color of a line according to its slope. Is it possible to draw a line for the mountains etc. in a single color, and then use some kind of effect or plugin to make the rising sections darker and the flat parts lighter?
I transcribe church registers, due to the poor copies I need to change the background colour as this improves the writing for me to read and transcribe correctly. When I used PSP8 which I am unable to use now I was able to change the colour by using the dropper.
View 4 Replies View Relatedhow to change the clour of the txt
View 1 Replies View RelatedWhen I want to flood fill -say a cloudy sky with blue, is it possible to use my own colour-that is an image taken of a blue sky instead of using one of the options shown after clicking to get the default colour choices in PSPro X
View 11 Replies View RelatedI went to use the 'colour' function in 'effects' to tint something and it seems to have gone!!!
Is this just on my computer, or has it been removed, or moved?
I've managed to pixelate an image down to 128x128 pixels and have the amount of colours to 64.
However, I'm trying to get it that when I select a coloured pixel that all the other pixels of that colour are highlighted.
The magic wand seems to be the sort of tool I need but it highlights all colours/pixels that are similar; I want all pixels that have the exact RGB as the pixel selected.
A customer has given me a colour to work with but I have to come up with a darker version and several shades that are lighter as well.
I've played around with the colour wheel in PDN but can't seem to generate the right colours....
I always seem to come up with something that doesn't match the colour the original...
How can I generate several shades of a colour?
I need to alter the colour of the attached image to a gradient fill from blue to green (hex 283E90 to 9FCF6F)
The problem is every time I do this the image loses its sharpness (using magic wand, highlighting the area and filling a gradient and other similar techniques)
I produce one outlined and filled alphabet letter per A4 page to create a sign for a shop window, changing the colours every three months. I use Outline Object for the outline. Is there a method by which the outline colour of a previous letter can be changed or must I recreate the letter if I require a different outline colour?
View 3 Replies View RelatedHow to add color to transparency background?
View 13 Replies View RelatedScanning and viewing colour negatives
View 7 Replies View RelatedA coloured, shaded object has any number of individual colours.
How can I make a simple colour change (swap) but retain all the shading (gradient?) properties?
I have an image with a gray foreground and want to change the colour. With the flood fill tool selected I click on the foreground colour box in the materials palette.I click on the colour frame, the colour momentarily shows but does not alter the colour box.Clicking on the rainbow tab displays a box with black to white gradient in it.This will change the colour box to any shade clicked on.Clicking on the swatches colour tab gives varying shades in the colour box or does not change the colour box.What is going on here and how do I get back to normal so that I can change the foreground colour as before? PSPro X
View 6 Replies View Related
