I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 RepliesI am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
Currently the screen has a black border when I scroll to reduce the image size. Originally it may have been white.
View 1 Replies View RelatedI use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
Im playing with doing some tee shirt designs on PS. Is there an easy way to get a full colour photo down to two or three colurs for screen printing purposes?
View 5 Replies View RelatedI should select what I want in colour (for example - the arm), use the lasso tool to trace the arm then goto
Image > Adjustments > Variations and get the colour I want, but that doesn't seem to work
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI want to edit a photo of a car so that the car remains in colour and the background changes to black and white (or should I say mono?). I have seen this several times and wanted to have a go myself. I understand that it can be done in Elements using layers?
View 1 Replies View RelatedI am having an issue with colours changing on me when I convert files Corel Draw files in to AI files. The colours seem to get darker. I am converting files to AI but this is making it rather difficult.
View 1 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedI'm having issues printing layouts to full colour. I've Exported to PDF and plotted to a printer and the same things keep happening. The Polylines and hatching keep being faded whilst printing. I've checked lineweights, I've turned off everything to do with fading - even layer managers setting fade slide bar is turned off. I've massed with plot styles and still it is happening.
View 9 Replies View RelatedAny method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedI am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies View RelatedI have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies View RelatedWindows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies View RelatedAdobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedI am aiming to recreate the texture of the trees in this site map. It looks as though it was originally created with a marker pen, and has several shades of green that I want to also wish show. I have already created the trees, so its just the coloring i'm struggling with.
View 2 Replies View Relateddo the people know if you can find matching colours in one image? as in i find a colour with certain RGB dimensions, can i find the same or 'roughly' the same colour and whereabouts the same colours are, in the same image.
the problem is im trying to paint a picture and i want to know which colours are the same so it correspsonds almost exactly when complete (its quite a fiddly picture so correct colours are essential)
to saturate an image to make it all tones of one colour?
In particular "saturation_olive" is very smoothe with the shadows and tones still quite prominent.
I need to put this color: 514a4a, in a image. But if I click Ctrl + U, it don't let me put the HTML color code: 514a4a.
View 2 Replies View RelatedI'm new this forum and I really need help on touching and improving of images. For instance, the image below - I would like to have a clear/transparent background so it looks like those photos that are featured in catalogues.
View 10 Replies View RelatedI'm starting with a colour image which I can transform into greyscale ok, but I want to retain a portion of the image as colour........
View 3 Replies View RelatedI just created an image for a website (The image was created using a number of layers and has a res of 180 pixels/inch).
The image in PS looks nice crisp and bright. When I save it down to either a .gif of jpg file and upload it the colours, when viewed via a web browser appear to have less luster and look pale by comparison.
I used the standard PS save settings when saving the file.
how I can improve the quality of my images?
I've scanned in an image of a drawing that I did on tracing paper with a black ink pen. When the image comes through onto my screen there are some white areas that are 'shaded' a 'dirty' brown colour. I could go through and try and erase all the shading but that would take ages and it's not very efficient.
View 8 Replies View Related