Photoshop :: Replace Colour Tool Not Allowing Multiple Colour Replacement
May 21, 2013
I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
View 2 Replies
ADVERTISEMENT
Jun 3, 2012
I am trying to change a silver to a deep reddish brown but when I try the colour is off..Here is what I have tried.
I have used the colour replacement tool as well as the Hue tool but like I said it produces a variation of the original colour and the new colour.I have also played around with desaturation but with the same colour I end up with a pink. This was just a shot in the dark.
View 9 Replies
View Related
Feb 8, 2006
I know there are many posts in different forums about the colour replacement tool (believe me, I've read them all) and some people have had the same problem as me but no one yet has come up with a solution.
This tool is fantastic and allows you to change the colour of an image without affecting the texture and shadows.....SOMETIMES!! Code:
View 9 Replies
View Related
Feb 14, 2013
There doesn't appear to be a sampling method for the colour replacement tool in Elements 10, whilst there is one in Elements 11 & previous versions. Can I get a plugin/download to give me the option in Elements 10?
View 5 Replies
View Related
Jul 16, 2013
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
View 9 Replies
View Related
Jun 11, 2012
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies
View Related
Aug 10, 2009
I'm planning to do some giclee prints involving scans of original watercolour paintings of botanical subjects. Because of the nature of the subject, 90% of the content of the image is actually the original art paper with nothing on it.
The 'nothing' still has a colour of course (creamy off-white), and when I print on to a similarly-coloured fine art inkjet paper I get a darker background than the original because I'm effectively finishing up with two lots of background. Is there a way I can make the background a lighter shade that doesn't involve use of one of the selection tools?
View 1 Replies
View Related
Sep 26, 2012
I use Photoshop CS3 and have multi layer PSD with which I am creating web graphics. The PSD is set up to export layer comps to files to produce a standardised set of graphics. The website has a standardised palette of 4 colours.
The vector and raster graphics within the PSD use these standard colours, however when we apply the colour scheme of a new client to the document, I have to go through the document and manually change all the colours.
I would like to find a way to globally and directly substitute one colour for another by effectively substituting one hex code for another, thus avoiding editing the layers one by one.
View 10 Replies
View Related
Feb 4, 2012
I'm trying to replace a colour in PE9 (Enhance > Adjust Color > Replace Color) but it's only replacing the luminosity, not the colour.
For example, I'm trying to replace a pasty white with full red (255,0,0) and it just comes out grey....
I can't find any switches for 'color/luminosity/hue' etc
View 5 Replies
View Related
Apr 11, 2008
I have a B&W image in my PS2 (black car, white background) but when I click on image > adjustments > replace colour, on the background for example, it just goes gray...not the nice blue I want. This worked before with other images so I'm not sure why this is happening this time.
View 6 Replies
View Related
Nov 14, 2007
I've got an image of a girl in a black dress on a dark background. Which is the best way to turn the dress white/cream?
View 5 Replies
View Related
Oct 8, 2013
Can you delete and replace a colour in illustrator like you can in InDesign where it asks what colour in the palette you want to replace it with
View 4 Replies
View Related
Jun 16, 2012
A coloured, shaded object has any number of individual colours.
How can I make a simple colour change (swap) but retain all the shading (gradient?) properties?
View 7 Replies
View Related
Feb 27, 2013
Test file dropshadow_replace_demo.cdr contains a yellow rectangle with a black drop shadow, all in RGB,
Run Edit > Find and Replace with the options Replace Objects > Replace a colour model > Any colour model, replace with CMYK.
The rectangle will be converted to CMYK but the drop shadow remains stubbornly as RGB.
Of course there are third party replacers which are easier to use and probably work better, but the built in replacer ought to work properly on all objects that CorelDraw supports and not just some of them.
View 1 Replies
View Related
Jun 18, 2013
Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies
View Related
Aug 19, 2013
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
View 2 Replies
View Related
Oct 2, 2013
I have hundreds of images that all have the same watermark (more or less but not exactly in the same place). It can easily be removed with the paint bucket with the default settings, the watermark is light grey, the pictures (JPGs) are black and white (a scanned book). But the sheer number of images makes it a gigantic effort to do it by hand.
View 6 Replies
View Related
Aug 10, 2013
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies
View Related
Feb 25, 2004
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies
View Related
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
Aug 11, 2013
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
View 4 Replies
View Related
Aug 17, 2012
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
View 3 Replies
View Related
Jan 28, 2012
Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies
View Related
Jun 24, 2011
I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
View 1 Replies
View Related
Jul 28, 2012
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies
View Related
Sep 12, 2013
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies
View Related
Jul 26, 2013
Windows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
View 2 Replies
View Related
Jun 4, 2013
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies
View Related
May 23, 2013
Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies
View Related
Feb 19, 2013
Note: It is not under the Selection tab in the menu.
View 2 Replies
View Related
Dec 14, 2012
Is there a way to adjust the colour balance on multiple layers at the same time?
View 2 Replies
View Related
