copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies
I have a big problem with Illustrator and it happens all the time. I have made a pattern and although it works fine I now have no colours in my swatches just the patterns and my line choices for strokes is now limited to one choice. If I open a new doc the default materials are back and line choices. It's obviously a preference somewhere but I haven't the foggiest idea where to find it. It's very frustrating because I can't reset to the defaults and I can't append colours to the swatches or append new strokes to the line choices.
View 1 Replies View RelatedIm working on an object which has 4 anchor points, i would like to keep to black stroke for 2/3 segments of the object but i would like to change the colour between two anchor points (so 1/3 segments).
View 5 Replies View RelatedSo i have this piece and i need to be able to colour different sections of the stroke around the whole piece with different colours. Also, i need to be able to change the width uniformly on sections between anchor points. I DO NOT want to use live paint as it takes away the sections of stroke i have tapered off already, however, the effect you get when using the live paint selection tool is exactly what i need
Is there a way of doing this at all?? It seems that i should be able to do it but i'm not able to find the right button, option or combination of both.......
How can i fill the back ground with a white colour - I would like my main image with a white background but i am not too sure how to achieve this?
View 3 Replies View RelatedHow do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedI am currently navigating the document model through all objects and manually adjusting the fill colour of desired objects.For example, for each layer, I iterate through the GroupItems, CompoundPathItems, PathItems, in the GroupItems I navigate the GroupItems, CompoundPathItems, PathItems, etc.
In order to change all the colours of the objects, it ends up taking over a minute to accomplish. But in the Illustrator UI, I can select a very complicated group item and change it's colour very fast. In the SDK, GroupItem does not have a fill colour parameter, so I have to iterate through all sub-items to change the colour.
I run AI CS6. I open new document and prepare two shapes and fill them up with Pantone colors for reference, for my design. I procced to make some work, name cards for example.
Now I want to send the card to my printer, while I work on the rest of colleterals. So I open new document, identical to the one I oppened 30 minutes ago. I don't change color setting or anything. But when I paste the cards to new document, they change color.When I sample the colors, the Color Pallet identifes them correctly by thier pantone number.
I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies View RelatedDo you know if it is possible to use two or more colors with the artistic media brush without having to use the mesh fill .
in CorelDraw X5 .
I wonder if anyone can help? When I want to put a stroke around a selection (or a complete photo), on opening the stroke command, the default colour is always red. 90% of the time, I use a white stroke, so I have to change it every time. Is there any way I can set the default colour to white?
View 3 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedWhenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedI am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
How to fill an area with a colour in Xara 6, when that space is surrounded by different 'objects'?
So say I drew 3 separate lines to form a triangle. How can I fill that triangle with a colour? If I select the Fill Tool and choose a colour, then click in the centre of the triangle nothing happens.
If I were to do the same thing in Illustrator then it would simply create a new shape that fitted the space.
Perhaps this is not possible? Such a simple thing though, I feel I must be missing something. Is it perhaps available on Xara 7?
I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedI've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedAny method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedI am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies View RelatedWhen I want to flood fill -say a cloudy sky with blue, is it possible to use my own colour-that is an image taken of a blue sky instead of using one of the options shown after clicking to get the default colour choices in PSPro X
View 11 Replies View RelatedHow do I get XXDP7 to show the fill colour of a shape?
The outline width is zero and transparent, but the pallete on the bottom of the screen fails to show the fill colour.
I've selected a rectangular area of a jpeg and I want to fill it with a particular colour from another area of same image. Bucket Fill doesn't work here as it only selects from particular colours and shades in forground/background.
View 2 Replies View RelatedI have an image with a gray foreground and want to change the colour. With the flood fill tool selected I click on the foreground colour box in the materials palette.I click on the colour frame, the colour momentarily shows but does not alter the colour box.Clicking on the rainbow tab displays a box with black to white gradient in it.This will change the colour box to any shade clicked on.Clicking on the swatches colour tab gives varying shades in the colour box or does not change the colour box.What is going on here and how do I get back to normal so that I can change the foreground colour as before? PSPro X
View 6 Replies View RelatedI have created a curved line across my page using the Bezier tool. I need to fill the page below my curve to make it blue (and above the curve to stay white).
View 8 Replies View RelatedWindows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
When i use the pen tool to make a shape and then select fill path, i choose a colour to fill the path with, but it fills the whole page accept the shape. Is there a setting that needs turning off or anything like that!?
View 3 Replies View Related
