When I want to flood fill -say a cloudy sky with blue, is it possible to use my own colour-that is an image taken of a blue sky instead of using one of the options shown after clicking to get the default colour choices in PSPro X
View 11 Replies
I have an image with a gray foreground and want to change the colour. With the flood fill tool selected I click on the foreground colour box in the materials palette.I click on the colour frame, the colour momentarily shows but does not alter the colour box.Clicking on the rainbow tab displays a box with black to white gradient in it.This will change the colour box to any shade clicked on.Clicking on the swatches colour tab gives varying shades in the colour box or does not change the colour box.What is going on here and how do I get back to normal so that I can change the foreground colour as before? PSPro X
View 6 Replies View RelatedI am new to the site so not sure if this has been asked yet.
How do you do a flood fill with a transparent background, I can see how i can flood fill with colors and all that fun stuff, but for the life of me i cant find a selection for transparent.
paintshop pro x5 ultimate
In PSPx2 I used to select an area in an adjustment layer and then use the Flood Fill tool to create a mask. Did it quite often.
In PSPx4 the Flood Fill tool doesn't seem to work on adjustment layers. I can get the desired effect using the Airbrush, but it's a tedious and imprecise technique. Is this a known bug (I searched the forum but couldn't find it) or an intentional change?
I need to update many files using a flood fill with the following settings:
Flood color = white
Flood mode = global
Fill = solid color
Tolerance = 50%
Is it possible to create a macro or otherwise process these files in a batch, rather than editing them one-by-one?
I started with a tif image that's a black & white drawing and used the fill tool to fill in some black areas that were supposed to be solid, but weren't. I also did a lot of cutting to get rid of specks on the image. It looked fine when I closed and saved it, but when I went to convert it to a PDF, all my tif's have a black background and white lettering--should be just the opposite. I have gone into the images and they all look that way (apart from the PDF). I'm guessing this is a layer issue, but I'm new to this program and can't figure out what I did wrong and how to fix it. I really don't want to start over. So, to restate, everything that should be black is white and all that should be white is black.
View 2 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedI have a scan of a pencil sketch as my background image. What I want to do is convert to colour image then, eventually, lose the pencil lines. For starters I would like to know how to flood fill an area with colour then get rid of the area's boundary line. I guess a valid solution might be along one of the following lines:
1. Flood fill, depositing the colour in one layer but using a boundary line in a different one.
2. Copy the sketch to another layer, fill the areas then somehow delete the lines.
3. Flood fill in one layer then copy the block of colour only, not the surrounding line, and paste into another layer. Any suggestions? As of a week ago I'd never used Photoshop so don't assume I know anything.
OK so I may be a bit slow, but! I've installed PSPx6. Setup my plugins etc. Even got my workspace to load and work! Only thing now that is bugging me is the background colour in the Edit window. I use the dark grey. In x5 the background to a photo in Edit mode matched the dark grey of the UI. Now in x6 it seems I'm stuck with the dark grey UI and a light grey background.
Am I missing something some where or is this option gone?
Apart from that x6 loads in 5-6 seconds. Good. Everything else 'seems' to be faster. (I'm using 64bit). BUT Adjustment layers are still slow
I want to change the colour of a picture frame (black) around the outside of an image and I am trying to use a (blue) from a 2nd image to do so. The 2nd image is an edited version of the !st image saved under a different name. PSPRo X .This is my work flow :-
1 Open 2nd image
2 Click the dropper tool on the 2nd image-the foreground colour in the met palette changes to that colour(blue)
3 Click on foreground colour box
4 Click on background colour box-wanted colour shows-OK.
5 Select flood fill tool
Then the foreground colour changes to white. Not doing step 4 ends up with white too.
I work with a German version and so I do not know the exact English words of the objects and functions. What I want to do is drawing circles with an outline (I know how to do that) but with a filling (background) colour which has a transparency of for example 50%. Is that possible and how should I do that?
Must I enter the outline and the filling part on two different layers to get the transparency for the filling colour?
I have seen photos where the background is black. Is it possible to do this with Photo Pro X3 Ultimate? If so, how? I'm retired (read as "older" and not as sharp as a younger person) and new at digital photography.
View 5 Replies View RelatedI can't find any preferences for changing the photo editing area background colour. I am not sure what it is called but what I am talking about is the space in the middle of the program where photos open up into (not the workspace option which changes the menu bar colours of which I am using the blue option.) At the moment the centre area is a charcoal colour. When I am editing a photo which is smaller than this space it is surrounded by this colour and it makes it hard for me to see the thin black border which I place around some photos. Can I change the colour of the editing area to white?
View 3 Replies View Relatedi would like to set a gradient in a form(exactly a text) from the stroke color to the fill color.
View 6 Replies View RelatedPSP X6. In the Manage workspace, in preview mode, the picture on the preview area does not fill the frame but about 3/4 of it leaving the right and bottom ends empty. It is the same with the 64b and 32b vertions.
View 4 Replies View RelatedI'm trying to get a script to use a fill foreground I've selected. I can get it ask me to select the foreground color but it always saves the foreground color used when I save the script. I can't figure out how to get it to use the current foreground color.
View 3 Replies View Relatedcopy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies View RelatedI use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
In Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
How to fill an area with a colour in Xara 6, when that space is surrounded by different 'objects'?
So say I drew 3 separate lines to form a triangle. How can I fill that triangle with a colour? If I select the Fill Tool and choose a colour, then click in the centre of the triangle nothing happens.
If I were to do the same thing in Illustrator then it would simply create a new shape that fitted the space.
Perhaps this is not possible? Such a simple thing though, I feel I must be missing something. Is it perhaps available on Xara 7?
How do I get XXDP7 to show the fill colour of a shape?
The outline width is zero and transparent, but the pallete on the bottom of the screen fails to show the fill colour.
I've selected a rectangular area of a jpeg and I want to fill it with a particular colour from another area of same image. Bucket Fill doesn't work here as it only selects from particular colours and shades in forground/background.
View 2 Replies View RelatedHow can i fill the back ground with a white colour - I would like my main image with a white background but i am not too sure how to achieve this?
View 3 Replies View RelatedI have created a curved line across my page using the Bezier tool. I need to fill the page below my curve to make it blue (and above the curve to stay white).
View 8 Replies View RelatedI am currently navigating the document model through all objects and manually adjusting the fill colour of desired objects.For example, for each layer, I iterate through the GroupItems, CompoundPathItems, PathItems, in the GroupItems I navigate the GroupItems, CompoundPathItems, PathItems, etc.
In order to change all the colours of the objects, it ends up taking over a minute to accomplish. But in the Illustrator UI, I can select a very complicated group item and change it's colour very fast. In the SDK, GroupItem does not have a fill colour parameter, so I have to iterate through all sub-items to change the colour.
When i use the pen tool to make a shape and then select fill path, i choose a colour to fill the path with, but it fills the whole page accept the shape. Is there a setting that needs turning off or anything like that!?
View 3 Replies View RelatedMy corel x5 opens with object properties are set with x no fill and on opening a new document and creating a shape, it has no fill.
My boss opens corel x5 and his object properties are set with x no fill but on opening a new document his properties change and a blue color shows in his fill, and of course when he creates a shape it is filled with this blue color.
Yes, he can just change the properties to x no fill each time he opens a new document but i wondered if we can change it and have it set at x no fill as the default ? I have tried everything I can think of but it seems to want to keep this blue color as the default.
How can I edit the department names, once rooms have been assigned to them?
View 4 Replies View RelatedI have a map in AutoCAD and I would like to fill certain sections of it. The colour that I require the fill to be changes according to varying data in an excel spreadsheet. Is there a way of linking the two?
View 2 Replies View RelatedMesh Fill.cdr
In X5 when converting a cmyk meshfill to cmyk bitmap there is often an unacceptable shift in colour.
The only workaround I have found to maintain cmyk values is to export mesh fill as pdf and then save as bitmap in Acrobat.
Does same behaviour occurs in X6? Sample file attached.
AdobeRGB
US Web Coated SWOP v2
I recently switched to coreldraw x5. is there a way to change default guidelines color. and this setting should remain forever.
one more thing i want the green processing filling, which is now present in the background tasks to be visible. ...just like in older versions how can i do it?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
