I have seen photos where the background is black. Is it possible to do this with Photo Pro X3 Ultimate? If so, how? I'm retired (read as "older" and not as sharp as a younger person) and new at digital photography.
View 5 RepliesOK so I may be a bit slow, but! I've installed PSPx6. Setup my plugins etc. Even got my workspace to load and work! Only thing now that is bugging me is the background colour in the Edit window. I use the dark grey. In x5 the background to a photo in Edit mode matched the dark grey of the UI. Now in x6 it seems I'm stuck with the dark grey UI and a light grey background.
Am I missing something some where or is this option gone?
Apart from that x6 loads in 5-6 seconds. Good. Everything else 'seems' to be faster. (I'm using 64bit). BUT Adjustment layers are still slow
I can't find any preferences for changing the photo editing area background colour. I am not sure what it is called but what I am talking about is the space in the middle of the program where photos open up into (not the workspace option which changes the menu bar colours of which I am using the blue option.) At the moment the centre area is a charcoal colour. When I am editing a photo which is smaller than this space it is surrounded by this colour and it makes it hard for me to see the thin black border which I place around some photos. Can I change the colour of the editing area to white?
View 3 Replies View RelatedCorel SP1. I now have toolbars I can see clearly, but the black background makes it impossible to tell if an image has a thin black perimeter border. Last release I could drag the window to size it larger than the image and it was easy to see. The attachment shows the trouble and I can't find where or how to change just the background color of the work surface without changing the color of the workspace that now works best for me.
View 1 Replies View RelatedI have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedIs there any freaking way I can change the background to be solid each time I start or reset 3ds max without having to create a maxstart.max file?
Because each time I switch project folders I lose my maxstart.max and the ugly gradient comes back again. I don't need it and I don't want it.
I need to alter the colour of the attached image to a gradient fill from blue to green (hex 283E90 to 9FCF6F)
The problem is every time I do this the image loses its sharpness (using magic wand, highlighting the area and filling a gradient and other similar techniques)
The instructions say <<< In the Background panel, select the Background Color option and click the color swatch to choose the color. >>> But I can't seem to find any way of changing the background colour from the default, white. ! (I want black.)
View 9 Replies View RelatedI've got a series of portrait type images where I may want to change the background. Once I select the image to placing a solid background behind that image? For instance, in this image, perhaps a solid black background would look better. PSE7
View 6 Replies View RelatedI am designing a calendar. When designing the background is a solid black, but when I export or save as PNG it appears on the screen as dark grey. I'm self taught and don't know if it will print out grey or black.
View 3 Replies View RelatedI was watching a video on youtube when a came upon a brush set called lens flares, since I already had the Custom Brushes Mini plug-in, I was amazed by the lens flares. So then I went to Brusheezy(Dot)com and searched lens flares, there was a brush pack that was the lens flares I was looking for, so I did the process so I could use them, but then when I went to use the magic wand tool, and delete the black colour for it to be transperent, not all the black was gone, I tried changing the tolerance to remove more black, but it wouldn't budge.
View 2 Replies View RelatedI have a clipart picture, which has varying shades of black and white. How do I change the image to pink? I would like to keep the shading. Its a very intricate image of a crown.
View 4 Replies View RelatedWhen I want to flood fill -say a cloudy sky with blue, is it possible to use my own colour-that is an image taken of a blue sky instead of using one of the options shown after clicking to get the default colour choices in PSPro X
View 11 Replies View RelatedI have a Black and White text logo which I want to invert/reverse the colours on. Yes it's that simple, but I can't get paint.net to do it. In the attached file, I need Black to be White, and vice-versa. Anything else needs to be left as it is.
View 2 Replies View RelatedI have an image with a gray foreground and want to change the colour. With the flood fill tool selected I click on the foreground colour box in the materials palette.I click on the colour frame, the colour momentarily shows but does not alter the colour box.Clicking on the rainbow tab displays a box with black to white gradient in it.This will change the colour box to any shade clicked on.Clicking on the swatches colour tab gives varying shades in the colour box or does not change the colour box.What is going on here and how do I get back to normal so that I can change the foreground colour as before? PSPro X
View 6 Replies View RelatedI want to change the colour of a picture frame (black) around the outside of an image and I am trying to use a (blue) from a 2nd image to do so. The 2nd image is an edited version of the !st image saved under a different name. PSPRo X .This is my work flow :-
1 Open 2nd image
2 Click the dropper tool on the 2nd image-the foreground colour in the met palette changes to that colour(blue)
3 Click on foreground colour box
4 Click on background colour box-wanted colour shows-OK.
5 Select flood fill tool
Then the foreground colour changes to white. Not doing step 4 ends up with white too.
I work with a German version and so I do not know the exact English words of the objects and functions. What I want to do is drawing circles with an outline (I know how to do that) but with a filling (background) colour which has a transparency of for example 50%. Is that possible and how should I do that?
Must I enter the outline and the filling part on two different layers to get the transparency for the filling colour?
I transcribe church registers, due to the poor copies I need to change the background colour as this improves the writing for me to read and transcribe correctly. When I used PSP8 which I am unable to use now I was able to change the colour by using the dropper.
View 4 Replies View RelatedI am trying to change one object of my picture to colour while the rest remains black and white.
View 4 Replies View RelatedHow to add color to transparency background?
View 13 Replies View RelatedI am trying to do a www logo with transparent text - colour of the text should change accordingly to web site background (image or solid colour).
I do not want to use Magic Wand as it degrade quality of the text.
I've tried to use 2 layers with blend mode set to multiply but it does not work for me if background was transparent (saved as PNG file)
I have a very simple picture in jpeg format. The picture is all in white on an orange background.I would like to use Paint.net to select the white picture and place it on no-colour background.
View 4 Replies View RelatedI just learned how to remove an object from the pic. Now this is my question.............i have a pic of a flower and i removed the background. I want to put the pic. on a solid white background. How to do this?
View 2 Replies View RelatedI want to change the background in the photo to a black or dark grey colour so the greetings card stands out
View 3 Replies View Relatedjust downloaded Paint.net a week ago. I am trying to convert a color logo from it's original design to a white log over a solid background, like the image attached. I need the solid background separate from the logo so I can change the color.
View 5 Replies View Relatedhow to change 'solid color background" image to Transparent?
View 4 Replies View RelatedI'm having a problem printing out a black and white photo. This is the first time I'm tring to print from PSP 3. When the photo is printed out, instead of looking like what I did in PSP 3, it looks like it was imbossed and black pencil. I have done a search and played around with PSP 3 with no luck..Even reinstalled PSP 3. If I go to the photo file, both the saved and the original, and print it directly, they comes out near perfect, except for a purple tint in both. You do not see the purple tint in the photo when in PSP 3 or the saved file untill it is priinted out.
JPG
102 KB
773x1000 pixels original size
72 dpi 8 bit depth
Resolution 2
EXIF 0220
Off the internet
Canon PM 620 printer
Kodak paper
No error codes
PSP 13.00
I'm having trouble changing a black and white map to filling it with a color. In the materials palette the foreground and background remain in the greys/blacks and will not accept the change to a color.
View 1 Replies View RelatedWin 7 64 bit PSPX2 Ultimate (12.50)
If I open a new image Raster background (white) RGB-8bit/channel and put the size in inches centimetres or millimetres I get a black 1px line horizontal and vertical on the image. I either have to paint over it or open the image using pixels as the sizing.
Example: New image 1black spot saved.
[URL]
I have only just found out how it occurs. It also is the same if I install PSP on Laptop (win7 64 bit)I make animations and can use upto 50 images replicating from the 1st image so if I forget to paint out the lines on number 1 image (as I did last week) and then put them through an animator and then scream when I see the black lines on the finshed animation. At least I now know to always use pixels as the size of the images.
Of course now I know I will try and use pixels when opening a new image (but would sooner use the other measurements )
I recently bought new computer and installed windows 7. But now when I try to scan and import images from the internet with Paint Shop Pro the images are fouled with lots of squares of black.
View 3 Replies View RelatedTried a search in the help file in Paint Shop Pro X3, but could not come up with anything. Is that an option/tool it has?
View 3 Replies View Related