Paint Shop Pro :: Printing Out Black And White Photo
Jan 24, 2012
I'm having a problem printing out a black and white photo. This is the first time I'm tring to print from PSP 3. When the photo is printed out, instead of looking like what I did in PSP 3, it looks like it was imbossed and black pencil. I have done a search and played around with PSP 3 with no luck..Even reinstalled PSP 3. If I go to the photo file, both the saved and the original, and print it directly, they comes out near perfect, except for a purple tint in both. You do not see the purple tint in the photo when in PSP 3 or the saved file untill it is priinted out.
JPG
102 KB
773x1000 pixels original size
72 dpi 8 bit depth
Resolution 2
EXIF 0220
Off the internet
Canon PM 620 printer
Kodak paper
No error codes
PSP 13.00
View 2 Replies
ADVERTISEMENT
Nov 14, 2011
How to create a photo that has a specific area of a photo containing the original color and the rest of the photo be black and white. I am using Corel Paitshop Pro X4 Ultimate.
View 3 Replies
View Related
Oct 13, 2012
What is the best way to convert a color photo to black and white for commercial printing.
View 9 Replies
View Related
May 8, 2012
I haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies
View Related
May 14, 2012
I'm having trouble changing a black and white map to filling it with a color. In the materials palette the foreground and background remain in the greys/blacks and will not accept the change to a color.
View 1 Replies
View Related
Jun 28, 2011
Tried a search in the help file in Paint Shop Pro X3, but could not come up with anything. Is that an option/tool it has?
View 3 Replies
View Related
Jun 18, 2013
I started with a tif image that's a black & white drawing and used the fill tool to fill in some black areas that were supposed to be solid, but weren't. I also did a lot of cutting to get rid of specks on the image. It looked fine when I closed and saved it, but when I went to convert it to a PDF, all my tif's have a black background and white lettering--should be just the opposite. I have gone into the images and they all look that way (apart from the PDF). I'm guessing this is a layer issue, but I'm new to this program and can't figure out what I did wrong and how to fix it. I really don't want to start over. So, to restate, everything that should be black is white and all that should be white is black.
View 2 Replies
View Related
Sep 14, 2012
I am trying to save a red and white and black logo to an eps file to use with a vinyl cutter but when it saves it changes it to a greyscale picture and the red color is removed. I tried resetting to factory settings and that didn't work.
View 2 Replies
View Related
Feb 14, 2013
I have a color photo I want to change it to black and white (easy enough) Next I want to add some color into some flowers
Example: Color Photo changed to Black and White My flowers from my wedding were all white...how do I add soft pink touches to the flowers?
View 4 Replies
View Related
Nov 7, 2013
I would like to get some variety of photos looking like they were taken during the civil war era. This would include white specks, black splotches, blurred edges, irregular black edges, etc. I have looked for ways in which to accomplish this and have not been successful at this.
Currently, I am using the following to varying degrees: Sepia Toning/Black and White, Blur, Salt and Pepper noise, and Vignette.
I have PSP 5
View 4 Replies
View Related
Dec 29, 2010
What format would I need to save a scanned in black and white line drawing so that I can color it in using the Fill function (like a comic book)? I used to do it with earlier versions on PhotoPaint (6 and 9) but haven't done it in a while and now cannot find the right format.
Now what happens is when I use the fill function the whole image turns to the selected color, it wont recognize the black lines as borders.
View 12 Replies
View Related
Sep 20, 2011
How would I make a photo black & white, but have only certain things colored. Like have a colored headband or flower, but the rest of the pic B&W.
View 2 Replies
View Related
Dec 21, 2011
I am trying to remove two people from the background of this old B&W photo of my Grandpa and Great Uncle. how to get them out and keep the photo looking realistic? I don't mind changing the background, I just can't figure out and easy way to get this done, aside from zooming in really close, cutting them out, and pasting them on another background. I just don't know how realistic this will look.
View 2 Replies
View Related
Jun 6, 2013
See Attached photo. I can do the color black on top yellow on the bottom half. what is the best way to do the red line that separates the yellow from the black.
Attached Images
Attached Files
NP-EMD-GP-9_Copy-1.bmp 220.58KB
34 downloads
View 2 Replies
View Related
Sep 8, 2011
I'm not sure if you can do this but if any of you have seen the Itunes Color Effects app, I'm wondering if there is a way to keep color in one part of a photo while making the rest B&W? I know how to make it B&W & I can't get it to work with the paint bucket or anything like that.
View 2 Replies
View Related
Mar 5, 2012
I created an ad in color but might possibly be required to provide it in black and white also. However, The file contains an image that's in color. So I need to know if there is an option to print the file to PDF in black and white? I tried changed the settings many times to no avail. I'm using DP7.
View 5 Replies
View Related
Feb 18, 2013
I have PS CS6 and like to do B & W prints. I print them on my Canon MX870 printer (4 color printer) ... they turn out quite nice. VERY Black & White. Recently, I started doing B & W with a small highlight of color... like a photo of my daughter and her friends with just her red shoes in color.
The Black and White is now not truly B & W... it is slightly tinted ... purplish. I have tried adjusting the levels and contrast but it only changes the tinting to other tints... bluish, redish, etc. I use cmyk 300dpi (typical of what commercial print shops would use). Still no success. Or am I stuck having to send my photos to a printshop for printing?
View 9 Replies
View Related
Dec 26, 2013
I recently upgraded my computer, and use the same AutoCADLT 2012 software I used on the old system. However, now when I print drawings or make pdfs, they are in color instead of black and white. And the pdfs in color now copy in such a way that some of the layers appear faded, are very light, and are difficult to read. How do I get the prints and pdfs back to black and white, with no color?
View 2 Replies
View Related
Mar 9, 2012
I have a drawing file of AutoCAD 2012 with different coloured lines. When I take a print using "monochrome" option also, I get my yellow lines as light black which I don't want. I want all the elements to appear as black of same brightness. What should I do?
View 9 Replies
View Related
Feb 3, 2012
How can I print in black and white while using true colors? I've tried the monochrome ctb, monochrome stb, looking for solutions in these forums, etc. The std 255 colors are not a problem. It is only when I use a true color. When I tried the monochrome stb setting, the fill color on my multileaders did not change.
Also, in paperspace, with viewports that had solid objects in them, I used to be able to print and have hidden lines removed without them showing up that way in the viewport. (used 2008 at the time and have jumped from that to 2012)
I seem to remember that the was a variable command that controlled this but I can't remember it.
View 2 Replies
View Related
Oct 27, 2005
I have an image where i chopped seperate parts of different pictures, desaturated all 4, but on the one, there seems to be more "grays" in the black and white photo... i want the grays to be more black. Messing with the brightness and contrast isnt doing it...
View 9 Replies
View Related
Sep 25, 2013
For my business card design I have white text overlapping an area of very white grey- causing readability issues (insufficient contrast). It looks great apart from this one problem, so I still want to keep my white text and light background and fix it by separating the text and background with a darker drop shadow..
First, I added a black drop shadow to the text- but this was not enough to increase readability (text still looked faded on background as drop shadow was too subtle at 85% opacity, 0.04" blur) so I added a drop shadow to my drop shadow (100% opacity, 0.02" blur + 18% opacity, 0.02" blur). This produced a heavier drop shadow effect for my text as desired but, for some reason, the text came out slightly grey in print (offset run). It seems the drop shadow somehow got printed over the text itself to some extent- turning the white text somewhat grey (and so not looking as clean as intended).
How could this dropshadow bleed into the text happen? Is it to do with the fact I added a drop shadow to my drop shadow? I would have thought that, even then, the text should entirely overlap all of the drop shadow as the text is the top layer in the group.
What can I do to ensure that drop shadow does not print over text in any way in future? Do I have to stick to only one layer of dropshadow-or is there something else I'm missing?
View 2 Replies
View Related
Feb 19, 2012
I would like to colorize old black and white photos .
View 3 Replies
View Related
Oct 17, 2013
Is there any way to put some colour in a black and white photo?
View 1 Replies
View Related
Jun 11, 2004
I am using Photoshop 6.0 and would like to know (in stupid people terms) if there is a way that I can make my photo black and white, but still have one color in it (for example, a black and white face except for green eyes).
View 4 Replies
View Related
Sep 22, 2007
How do I make a normal photo of a person look like the one below? If its even possible?
View 2 Replies
View Related
Jan 15, 2009
I have a grayscale photo taken in fron to a window producing a bad bounce flash. How do I fill in the spot using a portion of the outside image?
View 1 Replies
View Related
Dec 6, 2003
I thought I saw a neat tut somewhere about coloring a black and white photo. Seems the photo was of a US Air Force officer.
View 9 Replies
View Related
Nov 10, 2005
What I have is a photo of a classroom with pupils seated and teachers standing against a large windows on one side of the room.
The photo was taken pointing towards the windows so that the pupils near the camera are perfectly exposed but the ones nearest the window are too light and faded out.
I'm sure I read a tutorial some time ago about dealing with this type of thing but I can't find it anymore.
View 4 Replies
View Related
Nov 28, 2006
I really don't know what to do and where to start with this photo. After playing with it for hours, its seems all i did was sharpen it and bring up lots of noise.
View 7 Replies
View Related
Aug 4, 2013
I took this photo which was OK but not great, and set the saturation to -100, and worked on the contrast and levels until the sky was very dark. Then I cloned the photo and applied a Linear, Stained Glass transparency to make the sky even darker.
The effect in black and white is so much more dramatic than it is in color.
I made it into my Facebook cover photo.
The font is Aire Bold Italic Pro
View 1 Replies
View Related
