AutoCAD LT :: Printing And PDF - Drawings In Colors Instead Of Black And White
Dec 26, 2013
I recently upgraded my computer, and use the same AutoCADLT 2012 software I used on the old system. However, now when I print drawings or make pdfs, they are in color instead of black and white. And the pdfs in color now copy in such a way that some of the layers appear faded, are very light, and are difficult to read. How do I get the prints and pdfs back to black and white, with no color?
How can I print in black and white while using true colors? I've tried the monochrome ctb, monochrome stb, looking for solutions in these forums, etc. The std 255 colors are not a problem. It is only when I use a true color. When I tried the monochrome stb setting, the fill color on my multileaders did not change.
Also, in paperspace, with viewports that had solid objects in them, I used to be able to print and have hidden lines removed without them showing up that way in the viewport. (used 2008 at the time and have jumped from that to 2012)
I seem to remember that the was a variable command that controlled this but I can't remember it.
I'm trying to print in black & white, everything works except the true colors, i've selected a b&w ctb file were all the colors are turned to black & selected a printer to print b&w. I've even copied contents into a new file but still the true colors are printing in color!!
I have a drawing file of AutoCAD 2012 with different coloured lines. When I take a print using "monochrome" option also, I get my yellow lines as light black which I don't want. I want all the elements to appear as black of same brightness. What should I do?
I want to do is colour in my scanned black-and-white images, but I have no idea where to start.
Basically, I'm drawing black-and-white comic strips, then scanning them in with the aim of colouring them on Photoshop. But first off, my scanner isn't great and it has left shadows that I don't want.
Secondly, it would be a brilliant help if Photoshop could somehow "recognise" which areas were black and which were white, so that all the black bits were the same colour black and all the white was really white rather than off-white in places. This would also help when it comes to filling in the colour, because I could then click "fill colour" (or whatever the appropriate command is) and it wouldn't just fill in a tiny pixel because it's a slightly different shade of white to the pixels next to it.
I have an empty file opened. Colors are set to black and white in the icon. Mode is RGB. When I try to use the brush tool to make a mark, it only comes out PALE PALE PALE gray. Opacity is set to 100% as is fill. Why can't I get a black line and what can I do about this? it's urgent as I need to sign a document.
I was wondering how to get a realistic face from a picture which the face is bleached out and all that is there is the eyes, nose etc, no skin color. It is a restoration project.
every time I try to copy a face color from another image, it just looks too phony when put on the origanal picture (bleached out pic).
I created an ad in color but might possibly be required to provide it in black and white also. However, The file contains an image that's in color. So I need to know if there is an option to print the file to PDF in black and white? I tried changed the settings many times to no avail. I'm using DP7.
I have PS CS6 and like to do B & W prints. I print them on my Canon MX870 printer (4 color printer) ... they turn out quite nice. VERY Black & White. Recently, I started doing B & W with a small highlight of color... like a photo of my daughter and her friends with just her red shoes in color.
The Black and White is now not truly B & W... it is slightly tinted ... purplish. I have tried adjusting the levels and contrast but it only changes the tinting to other tints... bluish, redish, etc. I use cmyk 300dpi (typical of what commercial print shops would use). Still no success. Or am I stuck having to send my photos to a printshop for printing?
I'm having a problem printing out a black and white photo. This is the first time I'm tring to print from PSP 3. When the photo is printed out, instead of looking like what I did in PSP 3, it looks like it was imbossed and black pencil. I have done a search and played around with PSP 3 with no luck..Even reinstalled PSP 3. If I go to the photo file, both the saved and the original, and print it directly, they comes out near perfect, except for a purple tint in both. You do not see the purple tint in the photo when in PSP 3 or the saved file untill it is priinted out.
JPG 102 KB 773x1000 pixels original size 72 dpi 8 bit depth Resolution 2 EXIF 0220 Off the internet Canon PM 620 printer Kodak paper No error codes PSP 13.00
I am trying to save a red and white and black logo to an eps file to use with a vinyl cutter but when it saves it changes it to a greyscale picture and the red color is removed. I tried resetting to factory settings and that didn't work.
For my business card design I have white text overlapping an area of very white grey- causing readability issues (insufficient contrast). It looks great apart from this one problem, so I still want to keep my white text and light background and fix it by separating the text and background with a darker drop shadow..
First, I added a black drop shadow to the text- but this was not enough to increase readability (text still looked faded on background as drop shadow was too subtle at 85% opacity, 0.04" blur) so I added a drop shadow to my drop shadow (100% opacity, 0.02" blur + 18% opacity, 0.02" blur). This produced a heavier drop shadow effect for my text as desired but, for some reason, the text came out slightly grey in print (offset run). It seems the drop shadow somehow got printed over the text itself to some extent- turning the white text somewhat grey (and so not looking as clean as intended).
How could this dropshadow bleed into the text happen? Is it to do with the fact I added a drop shadow to my drop shadow? I would have thought that, even then, the text should entirely overlap all of the drop shadow as the text is the top layer in the group.
What can I do to ensure that drop shadow does not print over text in any way in future? Do I have to stick to only one layer of dropshadow-or is there something else I'm missing?
You can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
You can see in the attached screen cap that colors 1-9 appear as white on my screen and that colors 10-22 are not correct either. This is only occuring in one specific drawing. Is there a preference that I switched somewhere that would make this happen? I have double checked that everything is ByLayer or ByColor that I can think of. If I insert this color chart into other drawings it looks fine. using C3D 2012.
I would just restart my drawing, however it is the new company template file that I have invested many hours into and would really like to be able to keep working with it and not start over. Or is there a good way to import and overwrite all the Prospector settings into a blank drawing?
Using Acad LT 2014, Win8. Using stb plot style. I also tried printing from my Win7 laptop, same result. Does not appear to be a Windows8 issue.
I am having something odd happening, I think it is new with 2014.
I noticed that my lines are not actually printing as black, but rather a very dark brown or almost black.
I have a stb style (Bk 1.00), Color = black, screening 100, and for some reason it's not really printing full black.
One layer (A-Elev-Maj) is set for color 132, but the plot style is Bk 1.00. It prints on my Canon Pixma and on pdf as very dark brown.
I have another layer (A-Fill-Bk) set to color 0,0,0, and also plot style Bk 1.00, and it prints dead black.
I tried making the A-Elev-Maj layer 0,0,0 and it still prints an "almost" black.
I checked in the stb file, it is really set to black. I tried 250, as well as 0,0,0 and go the same result.
Attached pdf. You can look at the fence railing or the triangle chimney cap to see the comparison of the A-Fill-Bk which is printing actual black and surronding lines which are "almost" black. Zoom in and you can see it.
I wanted to make a decal to place on the acrylic window of my PC. I found the perfect picture, which is in black and white. For it to look right though, I need to switch the black to white, and vice versa. Is there a way with Photoshop to automatically switch these, instead of having to manually switch them.
I scanned a black and white print in color and am trying to replace all the black with dark green. Been trying for hours in elements 9. This is all so hard. Just to ask this question I have typed it into 3 different screens, set screenname, many other hurdles.
following image shows up fine on WIndows machines, but on Macs it shows up as balck instead of navy, why? I have tried svaing in PDF, JPG, PNG, and PDF nwith Mac color profiles... what is going on? PS, the navy is #0d1125
I have a multilayered psd file. All layers should remain opaque except the black to white gradient layer where I need the white to be transparent. So that when I place the final psd on top of a block of solid colour in Indesign the gradient shows the background colour through where the black fades off.
I'm using PSE8. I was using Filter>Render>Clouds and it was working for me. I must have done something because the clouds that are rendered are black & white not Blue and white. My photo is of course a color image. How I can correct this or what I need to do to get back to the default setting that will render blue & white instead of black and white?
I am using 2D-AutoCAD, and trying to plot a drawing on a printer, the drawing is different colors and I want to print it black on white paper, I am unable to select the proper .ctb file from the Plot Style Table pulldown, it does not show up? I have plotted other drawing sets using this method but for some reason cant do it on this particular set.
We are having issues with gaps in our drawings when we print using Autocad LT. It has been fine for months and one day it just started printing with gaps between certain areas. However the gaps are not consistent and the gaps only happens with lines and not text or images.
It's possible to select a part in a view on a 2D drawing and change the color of all the lines belonging to that part.
This is really useful, but is there a way of assigning a line color to the .ipt file it's self, so that every time I place a view of that part the lines are automatically set to specified color?
This would also be useful within a single drawing when there are multiple views of the same assembly. e.g.
Part A would always be drawn in Red, Part B would always be green. This would really distinguishing between parts in complex assemblies. (Which I realise can be done manually but I think it could be done faster with less chance of making mistakes.) Currently, I color all the parts, but then if I make an additional view, the new view is all in black.
So, a lot of years ago, someone decided on a particular color for a layer and it became the company standard. Today, and many, Many, MANY standard drawings later, it was determined that that layer's color should change. Any automated way to change and existing layer's color on all the drawings in a directory and that directory's sub-directories?
I would like to know how to go about printing scaled drawings form the Layout tab. How do I scale everything onto a say for example A3 paper in a scale of 1:100?
In M'Space I have created a layout (i.e. buildings) which in P'Space is my Dwg 1. I want to reference part of that layout in what is to be my Dwg 2. On Dwg 2 I want to insert a block (paths), because my dwgs are referenced when I insert that block it appears on both P'Space layouts. I've even tried inserting the block on its own layer but of course if I turn it off it turns off on both dwgs..... Is there a way I can print both the dwgs so they individually look the way I want without having to remember to select "do not print" that layer everytime I need to print Dwg 2?
I have an electrical drawing of a system, but the drawings are all on one page, and in order to print i have to go to print and then highlight want i want to print individually, is it possible to print all in one shot . (please see the attached file)
