AutoCAD Inventor :: Part Line Colors In Drawings
May 1, 2013
It's possible to select a part in a view on a 2D drawing and change the color of all the lines belonging to that part.
This is really useful, but is there a way of assigning a line color to the .ipt file it's self, so that every time I place a view of that part the lines are automatically set to specified color?
This would also be useful within a single drawing when there are multiple views of the same assembly. e.g.
Part A would always be drawn in Red, Part B would always be green. This would really distinguishing between parts in complex assemblies. (Which I realise can be done manually but I think it could be done faster with less chance of making mistakes.) Currently, I color all the parts, but then if I make an additional view, the new view is all in black.
View 2 Replies
ADVERTISEMENT
Oct 3, 2011
I am having some issues concerning updating drawings. When a part (.IPT) is placed in a drawing, everything is fine (ie. the views represented in the drawing are up-to-date). Yet, when I make a change to the part (something as small as a dimensional change) it does not translate through to the drawing. This is also the case for iProperties.
I have been playing around for a while now, but have had no luck. The part is also an iPart, but this shouldn't matter.
View 9 Replies
View Related
Nov 28, 2011
Can we have a better way to create “text” in the Inventor part drawings?
I almost create “text” in every part drawing in different view. I have to create a sketch first, than create a text and dimension the text so I can lock the text in position, otherwise when you move the view and the text will stay in different location.
I had been used “Solid works” for long times. When I need to create a text, just click that view and create a text and the text will stay with that view, whatever you move that view and the text move together.
View 2 Replies
View Related
Feb 12, 2013
I have a C-channel that I bent and then created a i-part of so that I could place both a formed and flat view in the drawing. After creating the drawing it was determined that the channel needed to be longer. Not a problem, open the factory, edit the part, open table and verify, close table and activate both parts, save and close factory. It's all good, until I run a print and the flat part (-02) of the factory still shows the old length. Next I open the factory, select table and both members and generate. The message " not able to save factory" appears.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 7 Replies
View Related
Aug 16, 2011
I want to be able to hide a part of an assembly in one projected view of the 2d drawing but not all, however when I do so the hidden lines stay hidden lines. They do not change. I know you can change the hidden line properties to make them continuous lines but is there a setting that will allow these lines to change automatically?
View 9 Replies
View Related
Apr 5, 2013
What's the purpose of making modeling edits at the assembly level if those edits don't show up in a drawing of the parts? Sure, it makes the assembly look prettier and more true to the final product, but say I make a bunch of cuts, holes, etc. at the assembly level, but then I make a drawing for one of the parts that was affected... those edits don't show up on the part itself, so all those edits are of absolutely no use to me when I need to give the guys in the shop a detail drawing of how to make the part. Why I would make edits at the assembly level?
View 9 Replies
View Related
Oct 24, 2011
Why this part appears different colors (switches between brass and gray) as I rotate it?
View 2 Replies
View Related
Dec 5, 2013
I do a lot of work where I start with a full assembly drawing, then make more drawings for the individual parts. Is there a way to link the title block parameters in the part drawings to the title block in the full assembly drawing? The only way I found was to link the parts together and then grab the info for the drawings off of the parts, but if I'm implementing this in a template used by others I want them to still be able to just fill in the blank on the assembly drawing to make it work.
I was able to get iProperties to show parameter buttons, but I haven't seen any way to link to other files or anything like that.
View 9 Replies
View Related
Nov 12, 2012
I have several parts which I wish to modify, but, those modifications are only being done to get some prototypes made. I do not want the changed (non-approved part) to be used in current issue drawings, assemblies etc. until I have proven the modifications and am happy with them.
I can do this by doing a save as on the part and could just replace the previous design, but then I lose the history of changes/revisions shown in Vault which is critical to me and part of using vault in the first place.
View 3 Replies
View Related
Jun 21, 2012
What controls the line weight in idw drawings in Inventor 13? If I zoom in on a section the line gets wider as I zoom in until it looks like a pdf drawing. I don't have this issue with Inventor 12.
View 1 Replies
View Related
Oct 15, 2012
After simulation the result won't show colors in the part.Is this a bug ?
Autodesk Design Suite ultimate 2013
View 2 Replies
View Related
May 6, 2013
I have a little issue with drawings where I cannot find out how to highlight fillet edges on the models. I dare say I am missing some simple setup option.
The picture attached shows what I mean. The left is how the model looks in drawing mode and on the right is how I would like it to look (taken from the modelling environment).
View 1 Replies
View Related
Oct 2, 2012
I have an iassembly model with iparts in it. I am trying to make one absolutely complete model rather than have several models with redundant parts in it. For example having the full assembly and making a Top Line Drawing from that, but then also making a drawing from the individual components.
So for example I have a Top Line assembly drawing with a tank with all the fittings, gauges, and instrument panels shown. Then I would want to make another set of drawings showing the tank itself, fittings, gauges, and the instrument panel. My main issue is with the tank drawing; the tank drawing is supposed to be simply the tank so I would need to remove the fittings, gauges, instrument panel etc.
I would like to know if there is a way to "Hide" or "Supress" the components that I do not need for a particular drawing without taking them out of the model; yet at the same time removing it from the BOM because they wont be necessary at this level.
View 6 Replies
View Related
Oct 1, 2012
In drawings there are a lot of times where I turn off the visibility of certain line segments to make the view look cleaner.
What if I was to reverse the visibility of these lines segments down the road?
View 5 Replies
View Related
Feb 14, 2012
When I draw a sketch while making a dwg drawing, the lines are light green that is nearly invisible on the background color. How can I change the line color?
I'm using Inventor professional 2012 student edition.
View 6 Replies
View Related
Sep 16, 2011
i wanna making a extrusion from every select line in Part
/code
Public Sub test()
Dim oPartdoc As PartDocument
Set oPartdoc = ThisApplication.ActiveDocument
Dim oCompDef As PartComponentDefinition
Set oCompDef = oPartdoc.ComponentDefinition
Dim oSelectSet As SelectSet
[code]....
so this code dosent work
View 6 Replies
View Related
Jul 13, 2012
My part unit length has been setup as millimeter(mm).Once I created a line within 2d sketch by VBA script, the result of length always become to 10 times of value.For example, the two points of line is (0,0) and (0,4). But the result of length measured is 40.
My problem is how to create a line with part document setting?
View 1 Replies
View Related
Jul 25, 2012
I have a STEP file which is of a part similar to the rudder of a boat or an oar blade but twisted at the end, and I have to draw the split line to match the profile of the blade. I imagine I have to use a 3D sketch because of the twist and we are guessing that the split line will run down the apex of the blade, but I don't know how to get the 3D sketch to "stick" to the apex (there is no real apex as it's curved).
View 5 Replies
View Related
Sep 21, 2013
A large part of my job is creating installation drawings for plants (equipment and catwalks). Usually what I like to provide the installers is a plan view showing the equipment / catwalks with the base pads of the supports visible as hidden lines. If I just turn on hidden lines in a view, then it is too crowded.
However, manually turning on hidden lines for hundreds of base pads (potentially) is a huge time-sink and usually involves going through the browser manually to find them all. What I would like to do is automate the procedure to some extent. Usually there is only 4 or 5 different parts in an assembly that I need to have hidden lines for.
View 1 Replies
View Related
Dec 26, 2013
I recently upgraded my computer, and use the same AutoCADLT 2012 software I used on the old system. However, now when I print drawings or make pdfs, they are in color instead of black and white. And the pdfs in color now copy in such a way that some of the layers appear faded, are very light, and are difficult to read. How do I get the prints and pdfs back to black and white, with no color?
View 2 Replies
View Related
Jan 17, 2013
So, a lot of years ago, someone decided on a particular color for a layer and it became the company standard. Today, and many, Many, MANY standard drawings later, it was determined that that layer's color should change. Any automated way to change and existing layer's color on all the drawings in a directory and that directory's sub-directories?
View 7 Replies
View Related
Jul 25, 2013
I am using Autocad 2012. I need to make some 2D execution drawings from a 3D model. I tried to use the following commands: flatshot, flatten §ion plane. All of them are having bad results. From all this 3 commands the closer to my needs is the flatshot. But I am working with many layers which have different colors, so when I will generate the 2D views I need to see the same color as the layers have (each color is for a particular medium).
I am using this command without showing the obscured lines.When I am generating the isometric views with the flatshot I am seeing strange objects (UFO), is far away from the original model, you can see in the attachment.
It is possible to generate somehow 2D views (front views&isometric views) seeing the color which every element has, and it is possible to correct somehow those ugly isometric views ( the guys from autocad should do something with this, because when I am generating a isometric view the 2d drawing that I received is completely different from the 3D model !).
I want to make the drawings using the 2D views, because the 3D Models are very big (50-60MB) and it is very hard to work with them!
View 3 Replies
View Related
Jul 25, 2013
I am using Autocad 2012. I need to make some 2D execution drawings from a 3D model. I tried to use the following commands: flatshot, flatten §ion plane. All of them are having bad results. From all this 3 commands the closer to my needs is the flatshot. But I am working with many layers which have different colors, so when I will generate the 2D views I need to see the same color as the layers have (each color is for a particular medium).
I am using this command without showing the obscured lines. When I am generatic the isometric views with the flatshot I am seeing strange objects (UFO), is far away from the original model, you can see in the attachment.
My questions are: It is possible to generate somehow 2D views (front views&isometric views) seeing the color which every element has, and it is possible to correct somehow those ugly isometric views ( the guys from autocad should do something with this, because when I am generatic a isometric view the 2d drawing that I recived is completely different from the 3D model !).
I want to make the drawings using the 2D views, because the 3D Models are very big (50-60MB) and it is very hard to work with them!
View 7 Replies
View Related
May 19, 2012
I am working with vector art that has lines that either look like they were cut off and not finished out or extend to the edge of the page so they are straight when they should actually be curved.
Is there any way to take a straight line or part of an image and curve it with ease or will I have to redraw or alter each line?
View 4 Replies
View Related
Aug 8, 2013
In the attached screencast video you will see that I have a drawing set up on the left of the screen to show where all the sections are taken through the building. I have setup a layer called SPC SECTION LINES which is set up to be bylayer and on the colour green.
When I XREF this drawing into the sheet file on the right side of the screencast you will see how the colour turns yellow when reference into the new sheet file?
Why does the colour of the line change when it gets xrefed into a new drawing?
the screen cast can be found at [URL]
View 9 Replies
View Related
Nov 7, 2012
We've having an office wide problem of drawings getting bogged down with, in some cases, hundreds of linetypes. Not sure where the source of the problem is coming from but as we contiunally use the drawings they keep gaining more and more linetypes, like a snowball rolling down a hill, and the files become so large they are almost unusable. The linetypes don't purge out of the drawing and are not connected to anything. I've tried everything I can think of to clear out the linetypes and the only thing that seems to work is wblocking them. Which when we're talking about hundreds of projects consisting of hundreds of files is a lot of work. We do wblock the drawings in a project on occasion to keep the files usable but they just become infected again eventually.
What might work to clean them up on a batch basis? I've attached a file that's infected so you can take a look. This is a file that has never had anything xref'd into it and was created as a brand new file when originally created. At some point over the last 3 weeks it got infected with the linetype disease.
View 6 Replies
View Related
Apr 17, 2013
I have received a drg that when you look at the viewport in layout, all the line colors have changed to white, but in model space they are their designated colors by layer.
View 2 Replies
View Related
Nov 15, 2011
I set up our company log which gets embossed on most parts as a sketch block in an .ipt. The .ipt contains nothing but the sketch block. To use it, the designer only needs to derive the Logo.ipt file into their part and then use the scale setting to set the derived block to the desired size for that part. The result is a scalable set of line geometry that can easily be used for extrusion or emboss that is standard for all users. It works beautifully, that is until you try to use it in a sheet metal part in 2012.
For some reason, when this same part, which works perfectly in normal parts, is derived into a sheet metal part an error pops up stating that, "Selected part does not have any geometry that can be derived." Say what?
I was able to find a workaround by directly copying the block into the sheet metal part, but you no longer have the ability to go back and scale it if needed. Even more strange, when the block was copied over, it could not be deleted from the new part.
Is this just a bug with 2012? Why does it work in a normal part but not sheet metal?
View 7 Replies
View Related
Mar 28, 2012
Dear Sir, In particular project, when I insert part in Assembly file, It is inserted as a Tube & Pipe run part. so that It is not Grounded automatically. What is the settings by which I can insert as a normal part in assembly file ? I have attached herewith the JPG file also.
View 3 Replies
View Related
Dec 28, 2012
The part i make is from solid model>The part needs to be in sheet metal.What steps do i use to make as sheet metal part and have option to flatten part.
View 1 Replies
View Related
Apr 1, 2013
I`m looking for the iLogic code that can change one parameter (user defined) for each (ipt) part in assembly (iam)
The one below doesn`t work.
Sub Main Dim oApp As Inventor.Application = ThisApplication Dim oAssy As Inventor.AssemblyDocument = oApp.ActiveDocument For Each oSubDoc as Inventor.Document In oAssy.AllReferencedDocuments On Error Resume Next Parameter(oSubDoc, "FH") = 15.26 Next End Sub
View 5 Replies
View Related
