I am trying to save a red and white and black logo to an eps file to use with a vinyl cutter but when it saves it changes it to a greyscale picture and the red color is removed. I tried resetting to factory settings and that didn't work.
View 2 RepliesCS6 on imac and canon MG6150 printer.When I print a photo with areas of black the result looks like the black has been solarized and it prints out as a dirty grey with black edges.
View 9 Replies View RelatedI have a jpg with a white background, but when I place the image into my sketch the white background becomes grey.
see attached pic.
How do I get the decal to display the correct color?
I've got an image sequence that uses white on pngs, once they've been made into animated gif the white turns less white and slightly grey, how do i remedy it?
View 8 Replies View RelatedI'm having a problem printing out a black and white photo. This is the first time I'm tring to print from PSP 3. When the photo is printed out, instead of looking like what I did in PSP 3, it looks like it was imbossed and black pencil. I have done a search and played around with PSP 3 with no luck..Even reinstalled PSP 3. If I go to the photo file, both the saved and the original, and print it directly, they comes out near perfect, except for a purple tint in both. You do not see the purple tint in the photo when in PSP 3 or the saved file untill it is priinted out.
JPG
102 KB
773x1000 pixels original size
72 dpi 8 bit depth
Resolution 2
EXIF 0220
Off the internet
Canon PM 620 printer
Kodak paper
No error codes
PSP 13.00
I'm having trouble changing a black and white map to filling it with a color. In the materials palette the foreground and background remain in the greys/blacks and will not accept the change to a color.
View 1 Replies View RelatedTried a search in the help file in Paint Shop Pro X3, but could not come up with anything. Is that an option/tool it has?
View 3 Replies View Relatedi do not know much about color spaces. But I do know that different forms of media require using different colors (RGB, CMYK, all that stuff).
wrong color space or exporting formats.
What do I need to do to get the final video that I exported to look exactly the same (in terms of color) when it's uploaded on YouTube? Strictly just the color, because I understand quality goes down when uploaded to YouTube.
How to create a photo that has a specific area of a photo containing the original color and the rest of the photo be black and white. I am using Corel Paitshop Pro X4 Ultimate.
View 3 Replies View RelatedI started with a tif image that's a black & white drawing and used the fill tool to fill in some black areas that were supposed to be solid, but weren't. I also did a lot of cutting to get rid of specks on the image. It looked fine when I closed and saved it, but when I went to convert it to a PDF, all my tif's have a black background and white lettering--should be just the opposite. I have gone into the images and they all look that way (apart from the PDF). I'm guessing this is a layer issue, but I'm new to this program and can't figure out what I did wrong and how to fix it. I really don't want to start over. So, to restate, everything that should be black is white and all that should be white is black.
View 2 Replies View RelatedI would like to get some variety of photos looking like they were taken during the civil war era. This would include white specks, black splotches, blurred edges, irregular black edges, etc. I have looked for ways in which to accomplish this and have not been successful at this.
Currently, I am using the following to varying degrees: Sepia Toning/Black and White, Blur, Salt and Pepper noise, and Vignette.
I have PSP 5
i'm trying Photoshop CS4 and found out that Adobe changes many Shortcuts.
I often use the Selective Color und navigate between the Colors with CRTL+1 till 9. Now Adobe changed the Shortcuts to alt+3 (for RED) till alt+8 (for MAGENTA). Now my Question -how is the Shortcut for WHITE/GREY an BLACK?
I have tried to use Steve Pattersons color grid design tutorial to place a grid over a photo. When I drag my color photo into the new document it turns black & white. What I can try to keep this from occurring? I am using CS6 with Windows 7.
View 5 Replies View RelatedWhen I convert an RGB psd to CMYK color mode in photoshop everything works normally, but when I save as a TIF and open the file in any application other than Photoshop any white space in the image background is yellow.
I am running Photoshop CS4 on Mac OS 10.5.8.
Creating a collage. Just placed a new object with a layer mask. Now I need to create a hue/saturation, levels adjustment layer and color balance adjustment layer all with masks. Ok, no problem, but when I do this, my original picture turns black and white.
View 3 Replies View RelatedI am trying to convert an object's color from black to white. Like changing the color of a killer whale's black coat to sumthin like green or blue.
View 1 Replies View Relatednew to PaintNet. I have a Hex Grid PNG file where the Hex outlines are in a shade of grey. I want to "recolor: the grey lines black. Thought the RECOLOR tool would do that but I can't seem to get it to work. The Hex grid PNG is attached to this post.
Attached Thumbnails
I have an empty file opened. Colors are set to black and white in the icon. Mode is RGB. When I try to use the brush tool to make a mark, it only comes out PALE PALE PALE gray. Opacity is set to 100% as is fill. Why can't I get a black line and what can I do about this? it's urgent as I need to sign a document.
View 7 Replies View RelatedI recently upgraded my computer, and use the same AutoCADLT 2012 software I used on the old system. However, now when I print drawings or make pdfs, they are in color instead of black and white. And the pdfs in color now copy in such a way that some of the layers appear faded, are very light, and are difficult to read. How do I get the prints and pdfs back to black and white, with no color?
View 2 Replies View RelatedI was wondering how to get a realistic face from a picture which the face is bleached out and all that is there is the eyes, nose etc, no skin color. It is a restoration project.
every time I try to copy a face color from another image, it just looks too phony when put on the origanal picture (bleached out pic).
I'm trying to print in black & white, everything works except the true colors, i've selected a b&w ctb file were all the colors are turned to black & selected a printer to print b&w. I've even copied contents into a new file but still the true colors are printing in color!!
View 1 Replies View RelatedHow can I print in black and white while using true colors? I've tried the monochrome ctb, monochrome stb, looking for solutions in these forums, etc. The std 255 colors are not a problem. It is only when I use a true color. When I tried the monochrome stb setting, the fill color on my multileaders did not change.
Also, in paperspace, with viewports that had solid objects in them, I used to be able to print and have hidden lines removed without them showing up that way in the viewport. (used 2008 at the time and have jumped from that to 2012)
I seem to remember that the was a variable command that controlled this but I can't remember it.
I'm trying to remove the blitz shadow from head and body on a white/grey background, with the Lasso tool. The adjustments with Brightness/Contrast in the chosen area works like a charm, however I always get a nasty pixeled or whitelined boarder going constantly around the edited area; no matter if it boarders to a black area (shoulder) or a gray one (wall behind person).
I've tried to edit the primary/secondary color, with no luck. Any way to make this boarder "blend in" to the new brightness area - or to just remove it? The edited area is somewhat identical to the old background, so there is no natural reason to why it should be a constant boarder.
Or is it a better (and easy!) way to remove blitz shadow from a black and white picture?
when i want to draw something with a color it turns to gray?
it happens with a different color.
What does the magic wand tool do on PAINT.NET. I need to know What it is for b4 I can follow the instructions referring to me doing something I have no clue about, since I can not be doing it, as I do not know what the function of this tool is. 6 words (or 10) or less?
Or what has happened to the once great function on Adobe software called smudge? Unless I was dreaming, this was a simple function that would allow one to rub two different colored or shaded areas together, to blend them subtly into one color. This allowed one to blend a color or fix a big flaw, with out days of screwing around fixing 1000s of pixels one by one. I am trying to take the shadow out of the background in a picture, I just need to blend the two colors of white together to get rid of the shadow.
Also, why is crop command gone on my paint.net? It will not work. It is there, but it is lite (gone) and will not work.
I have a logo - blue and green colors, good for a white background. BUT, I want to place the logo on a dark green background.
SO, I want to convert all of the clors in the logo to White, but I don't know the best way to go about it. I tried using the paint bucket tool, but all of the shapes and letters have jagged edges with varying shades that are visible when zoomed in (dithered?), and the results I get when using the paint bucket aren't ideal.
I can't print with Photoshop (CS6). My printer (HP iP6700D) works correct with every program, except Photoshop. When I choose File>Print, there appears only an error-message. And the command-line turns into grey.
View 6 Replies View RelatedI have an image, all black of a ballerina on one layer, with black text on another. I am trying to put a bouquet of red roses at her feet, but it turns shades of grey when I attempt to do that.
View 2 Replies View RelatedWhen starting Photoshop Elements 8 Editor in Windows 7, the screen turns grey and my computer crashes. I tried reinstalling Elements 8 twice.
View 1 Replies View RelatedI'm having quite a bit of a problem with Paint.NET.
I'm scanning some text and saving it in black and white BMP files, usually around 60KB each.
Thing is, I need to edit those files to rotate the image a bit (sometimes the pages are misplaced) and when I save them as PNG files, they end up being even larger than the original file (around 100KB each).
I tried opening them up using Win7's Paint, and after saving them as PNG, I get a file of around 16KB.
Obviously there's some setting in Paint.NET that I'm missing, would you mind pointing me to it?
EDIT: Oh, I forgot to mention that I've also fiddled around with the settings in the "Save as..." dialog to no avail
I want a plugin that make the black and white (pic. 1) pictures to color pictures (pic. 2) like RED or what hex you add in. Opposite of Black and White addon (pic. 3).
Picture 1
Picture 2
Image 3