I'm having trouble changing a black and white map to filling it with a color. In the materials palette the foreground and background remain in the greys/blacks and will not accept the change to a color.
View 1 RepliesHow to create a photo that has a specific area of a photo containing the original color and the rest of the photo be black and white. I am using Corel Paitshop Pro X4 Ultimate.
View 3 Replies View RelatedI'm having a problem printing out a black and white photo. This is the first time I'm tring to print from PSP 3. When the photo is printed out, instead of looking like what I did in PSP 3, it looks like it was imbossed and black pencil. I have done a search and played around with PSP 3 with no luck..Even reinstalled PSP 3. If I go to the photo file, both the saved and the original, and print it directly, they comes out near perfect, except for a purple tint in both. You do not see the purple tint in the photo when in PSP 3 or the saved file untill it is priinted out.
JPG
102 KB
773x1000 pixels original size
72 dpi 8 bit depth
Resolution 2
EXIF 0220
Off the internet
Canon PM 620 printer
Kodak paper
No error codes
PSP 13.00
Tried a search in the help file in Paint Shop Pro X3, but could not come up with anything. Is that an option/tool it has?
View 3 Replies View RelatedI started with a tif image that's a black & white drawing and used the fill tool to fill in some black areas that were supposed to be solid, but weren't. I also did a lot of cutting to get rid of specks on the image. It looked fine when I closed and saved it, but when I went to convert it to a PDF, all my tif's have a black background and white lettering--should be just the opposite. I have gone into the images and they all look that way (apart from the PDF). I'm guessing this is a layer issue, but I'm new to this program and can't figure out what I did wrong and how to fix it. I really don't want to start over. So, to restate, everything that should be black is white and all that should be white is black.
View 2 Replies View RelatedI am trying to save a red and white and black logo to an eps file to use with a vinyl cutter but when it saves it changes it to a greyscale picture and the red color is removed. I tried resetting to factory settings and that didn't work.
View 2 Replies View RelatedI would like to get some variety of photos looking like they were taken during the civil war era. This would include white specks, black splotches, blurred edges, irregular black edges, etc. I have looked for ways in which to accomplish this and have not been successful at this.
Currently, I am using the following to varying degrees: Sepia Toning/Black and White, Blur, Salt and Pepper noise, and Vignette.
I have PSP 5
I want a plugin that make the black and white (pic. 1) pictures to color pictures (pic. 2) like RED or what hex you add in. Opposite of Black and White addon (pic. 3).
Picture 1
Picture 2
Image 3
i am tryen to make my picture black and white with some color.. I figured out how to do it by going to duplicate layers, then blck and white then eraser to what i want colored...BUTTTT when i mess up and i get color in the parts i dont want color HOW DO I fix my mess up?
View 2 Replies View RelatedAny way to change canvas color from white to black?
View 5 Replies View RelatedI have a color photo I want to change it to black and white (easy enough) Next I want to add some color into some flowers
Â
Example: Color Photo changed to Black and White My flowers from my wedding were all white...how do I add soft pink touches to the flowers?Â
Corel SP1. I now have toolbars I can see clearly, but the black background makes it impossible to tell if an image has a thin black perimeter border. Last release I could drag the window to size it larger than the image and it was easy to see. The attachment shows the trouble and I can't find where or how to change just the background color of the work surface without changing the color of the workspace that now works best for me.
View 1 Replies View RelatedI have a color picture in Paint.NET, and I want to make it black and white, like, something from 1961. Are there any features that can allow me to do this?
View 2 Replies View RelatedI'm not sure if you can do this but if any of you have seen the Itunes Color Effects app, I'm wondering if there is a way to keep color in one part of a photo while making the rest B&W? I know how to make it B&W & I can't get it to work with the paint bucket or anything like that.
View 2 Replies View RelatedHow do I change a White or Black colored picture or cropped part into a different color? Hue won't work because its color is white and black.
View 4 Replies View RelatedHow can I change the color of the background in an image from white to transparent?
I am using PSP v7.04
I work with a German version and so I do not know the exact English words of the objects and functions. What I want to do is drawing circles with an outline (I know how to do that) but with a filling (background) colour which has a transparency of for example 50%. Is that possible and how should I do that?
Must I enter the outline and the filling part on two different layers to get the transparency for the filling colour?
I haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies View RelatedI scanned a black and white print in color and am trying to replace all the black with dark green. Been trying for hours in elements 9. This is all so hard. Just to ask this question I have typed it into 3 different screens, set screenname, many other hurdles.
View 3 Replies View RelatedRather than fill a shape with a solid color, I want to be able to fill it with a gradient color. How might I do this?
View 4 Replies View RelatedI am very new to photography and Lightroom 3.4 64 bit. I have a photo of an apple on the table. I want to get the photo black and white (did that already). Now I want the apple it self to remain its own red color. How do I do that?
Â
Also, I have this apple and its reflection is on the knife that is cutting the apple. How can I get that in color too?
I have a color picture which I took, of a red berry bush. I want to remove all the color except for the red from the berries. I know how to lasso the berries, but I can't remove the color from the bush/background and leave the red berries.
Note: I did this once a couple years ago, and can't remember how I did it..I have some memories, but probably remember just enough to make me dangerous. I have done some searches but obviously the results are numeorus and I haven't found what I am looking for yet.
I know the solution involves selecting the berries and then inversing it and then setting all 3 colors to 0 for the background.
What I can do is
1) lasso the berries
2) inverse
what I can't figure out
1) it seems like there was 1 step about layering which enabled me to get started, but I don't remember this, it does seem like I am missing something very basic when I try to do this
3) Where is the color scale, the only thing I can find is the grayscale option which switches the entire project to black and white.
I tried to set a color photo over top of a black and white one to airbrush away enough to expose the backround (the grayscale pic) but when I tried to copy onto the first layer, it turned my color photo to grayscale. I tried this with the gray pic locked and unlocked. What did I do wrong, or can this even be done?
View 6 Replies View Relatedhow i can take a picture and get especific objects and keep them in color and change the rest to black and white? Its one of those cool effects dont know if u guys seen it...thanks
View 1 Replies View RelatedThe question that i have is, how do you do the effect, or is it even an affect where the whole pic is black and white but there is 1 color that is not. like from the attached pic you can see that the red is showing. you can see some on my skin and some on that red tape thing in the background.
View 3 Replies View Relatedtry and open the hue and saturation, it wont allow me to.
When i import the image, it will show up in color, just how it was, but I cant mess with hue or saturation.
if i select a color to draw with, it will show up a shade of grey, white or black.
I may have accidently clicked something to cause this, but im not sure how to fix it
Without actually selecting and cropping the pieces out onto another layer that you want to keep the one single color,
View 6 Replies View RelatedOK So I’ve been looking and searching around this site to try to get to know it. I found so many things that I'll use!! One thing I found but couldn't get to much detail on is coloring a grayscale image.
How do you get the hair color? Do you really need to Zoom in and just go in to detail? I guess that's what make a great Artist..
How do I make a black and white picture, but have the "subject" of the picture color?
View 2 Replies View RelatedI'm having quite a bit of a problem with Paint.NET.
I'm scanning some text and saving it in black and white BMP files, usually around 60KB each.
Thing is, I need to edit those files to rotate the image a bit (sometimes the pages are misplaced) and when I save them as PNG files, they end up being even larger than the original file (around 100KB each).
I tried opening them up using Win7's Paint, and after saving them as PNG, I get a file of around 16KB.
Obviously there's some setting in Paint.NET that I'm missing, would you mind pointing me to it?
EDIT: Oh, I forgot to mention that I've also fiddled around with the settings in the "Save as..." dialog to no avail
In celebration of our 50th anniversary, I would like to create a series of ads that have a black & white image (old) fading into a full color image (new) as the background. What is the best way to accomplish this?
Â
Ubiquitous Info: Adobe CS6 PS v13.0.1 x32 extended on a Win XP sp3 OS