Paint Shop Pro :: Change Colour Of Picture Frame
Dec 15, 2013
I want to change the colour of a picture frame (black) around the outside of an image and I am trying to use a (blue) from a 2nd image to do so. The 2nd image is an edited version of the !st image saved under a different name. PSPRo X .This is my work flow :-
1 Open 2nd image
2 Click the dropper tool on the 2nd image-the foreground colour in the met palette changes to that colour(blue)
3 Click on foreground colour box
4 Click on background colour box-wanted colour shows-OK.
5 Select flood fill tool
Then the foreground colour changes to white. Not doing step 4 ends up with white too.
View 7 Replies
ADVERTISEMENT
Oct 26, 2013
PSP X6. In the Manage workspace, in preview mode, the picture on the preview area does not fill the frame but about 3/4 of it leaving the right and bottom ends empty. It is the same with the 64b and 32b vertions.
View 4 Replies
View Related
Oct 22, 2012
I am trying to change one object of my picture to colour while the rest remains black and white.
View 4 Replies
View Related
Dec 19, 2011
I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies
View Related
Aug 23, 2013
OK so I may be a bit slow, but! I've installed PSPx6. Setup my plugins etc. Even got my workspace to load and work! Only thing now that is bugging me is the background colour in the Edit window. I use the dark grey. In x5 the background to a photo in Edit mode matched the dark grey of the UI. Now in x6 it seems I'm stuck with the dark grey UI and a light grey background.
Am I missing something some where or is this option gone?
Apart from that x6 loads in 5-6 seconds. Good. Everything else 'seems' to be faster. (I'm using 64bit). BUT Adjustment layers are still slow
View 6 Replies
View Related
Mar 11, 2013
Is there a way to add a "photo frame" to a picture? Like, is there a library or set of frames that can be used on the edges of pictures in a simple click or two?
I am wanting "pretty" frames for adding photos to printed coffee mugs etc.
View 1 Replies
View Related
Mar 11, 2014
I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative.
View 14 Replies
View Related
Jun 9, 2013
When I want to flood fill -say a cloudy sky with blue, is it possible to use my own colour-that is an image taken of a blue sky instead of using one of the options shown after clicking to get the default colour choices in PSPro X
View 11 Replies
View Related
Dec 24, 2011
I saw a tutorial on youtube and it is something I will like to do on my own. But with the tutorial, I have tried over and over again without getting the same result. How do I do this using PSP X4.
This is the url link [URL]....
View 1 Replies
View Related
Nov 30, 2013
I have an image with a gray foreground and want to change the colour. With the flood fill tool selected I click on the foreground colour box in the materials palette.I click on the colour frame, the colour momentarily shows but does not alter the colour box.Clicking on the rainbow tab displays a box with black to white gradient in it.This will change the colour box to any shade clicked on.Clicking on the swatches colour tab gives varying shades in the colour box or does not change the colour box.What is going on here and how do I get back to normal so that I can change the foreground colour as before? PSPro X
View 6 Replies
View Related
Oct 30, 2012
I work with a German version and so I do not know the exact English words of the objects and functions. What I want to do is drawing circles with an outline (I know how to do that) but with a filling (background) colour which has a transparency of for example 50%. Is that possible and how should I do that?
Must I enter the outline and the filling part on two different layers to get the transparency for the filling colour?
View 7 Replies
View Related
Jun 22, 2011
I have seen photos where the background is black. Is it possible to do this with Photo Pro X3 Ultimate? If so, how? I'm retired (read as "older" and not as sharp as a younger person) and new at digital photography.
View 5 Replies
View Related
Oct 15, 2012
I can't find any preferences for changing the photo editing area background colour. I am not sure what it is called but what I am talking about is the space in the middle of the program where photos open up into (not the workspace option which changes the menu bar colours of which I am using the blue option.) At the moment the centre area is a charcoal colour. When I am editing a photo which is smaller than this space it is surrounded by this colour and it makes it hard for me to see the thin black border which I place around some photos. Can I change the colour of the editing area to white?
View 3 Replies
View Related
Oct 26, 2013
I do a lot of screen captures mostly using Vdub to move frame by frame when I want a screencap. I don't get any problem with vdub but when I use other programs like MPC HC or sometimes even in WMP, the size dimensions sometimes gets captured with the image like this:
It gets quite annoying because I have to recapture the frame again and try different techniques to get it without the box or size dimensions showing up in the capture.I'm using Corel PSP x4 to do my screen captures. How to capture clearly without those box dimensions getting in the way?
View 8 Replies
View Related
Oct 12, 2013
I have an ancient version of Paint shop pro X. It worked fine for what I used it for-making note cards and simple stuff with photos. That was all fine until my computer died. OK I had the disc and install on new computer but now all the features do not seem to be working-ability to change color of the fill area etc.
Tried messing with that for a couple of days to see if I could get it to look like it did on the old computer-no such luck.
Now I download free trial of Paint shop Pro 6-great most of what I needed seem to be working and easy to do. But now I want to add picture frames and there is a very limited selection and when I tried to manipulate a previous version of a picture + frame+ texture only on the frame part-now the texture went all over the picture/space.
What gives here? I am very technically challenged and wish I could get my old version to work right and I would be happy. The layers of the new version give me a real headache and don't know that I can figure that out now-didn't need to do that on the old version. I was used to the old way and want that back on the new computer.....
View 8 Replies
View Related
Jul 26, 2012
I have PaintShop Pro x2 and x4 installed on different drives. Problem is that I cannot duplicate a photo in either programme! I chose "window>duplicate and nothing happens. What am I missing?
View 1 Replies
View Related
Nov 5, 2012
possible to add to the length of my project by about 35 pixels. i was cropping the two halfs of my project, and i took the measurements from the wrong point of view. long story short, if i could increase the length at the base without stretching.
View 2 Replies
View Related
Aug 25, 2011
I did look through the FAQ but couldn't quite find what I was looking for, perhaps because I am not sure of the proper terminology.
I have attached a screen copy of the effect I want to achieve.
Basically I have a picture of a scene/building from the past and I want to merge the two into one picture with the same scenery is shown on the edges and the scene from the past, faded In towards the middle section of the image.
Can this be accomplished with Layers? or Maybe a Collage? or is it something else?
View 2 Replies
View Related
Dec 19, 2012
I am new in paint.net. I tried "red-eyes-effect" but the red eyes turn into blue or grey instead of black.
View 4 Replies
View Related
Jul 3, 2011
I no longer have my Paint Shop manual and I don't know what "this" is called to search here or in my help section of my software.
I have Paint Shop Pro Photo X2, version 12.00
I want to change a pic I have of Jimi Hendrix like the one below so I can sketch it onto a canvas. I have played around with Photo shop.
73164_145358045511754_102317626482463_234732_3842573_n.jpg (20.36 KiB) Viewed 586 times
View 3 Replies
View Related
Feb 1, 2013
I am trying PSP 5 and have downloaded additional picture frames from an external sourse. I cannot find a folder named "picture frames" in the PSP 5 program files.
Where do I place these new templates?
View 3 Replies
View Related
Nov 29, 2012
I would like to clone one object from one picture to another. When I have 2 pictures side by side and I want to clone one object to the other pictures the percentages are not the same with each other and the object is out og proportion. How do I get both pictures with the same percentages? As an example maybe there's a fire hydrant and I would like to clone it to the other picture and have it look as a 1 to 1 ratio.
View 2 Replies
View Related
Sep 10, 2012
It's been a few days now that when I try to save a picture (either with "save", "Save as", or "save copy"), I get the following message popping up:
"because of the limitations of the specified file format (and possibly the save options you've selected), the saved file will be limited to a merged image. Would you like to continue?"
I have hit ok to that and the software would save the picture, but when I checked the size of each picture I noticed a dramatic drop in size (from 6.5MB to roughly 1.3MB). Just for the record, the editing I did to these pictures was minimal, just a little rotation and a removal of maybe 2mm from each size.
First of all, is it normal to get this message?
And then, is such a drop in size normal?
it's pictures in JPEG taken from the camera and saved as JPEG.
View 3 Replies
View Related
Oct 2, 2013
I somehow managed to change the settings so that now when I open a file, I can't see the picture I want to edit. I get a black box with vertical colored lines through it. How do I get rid of this, or get back to the system defaults?
View 1 Replies
View Related
Feb 16, 2013
How do I minimize one picture, in order to view two pictures is the same screen?
More details...In my previous version of PSP, when working on a photo, the tab at the top for the photo had the following options: Minimize ( _ ), Maximize ( [ ] ) and Close ( X ), similar to the options found in the upper right corner of most windows.
However, in X5, the picture window/photo tab only has the Close ( X ) option and no Minimize ( _ ) or Maximize ( X ) option.What am I missing or am I just daft?
I found being able to minimize multiple photos in the same window useful when pasting/cloming one image over another.Or, if I have multiple, yet very similar images, determining which is best without having to tab back and forth.
View 2 Replies
View Related
Oct 12, 2012
I took some pictures outside recently and when I looked at them later realized there were sun spots on them. I have Coral Paint Shop Pro x2 and how to remove this sun spots so I can salvage the pictures. Some of the spots are yellowish color and some are white. They are all on peoples legs so I have not been able to find a way to remove them. I have tried the cloning but it looks funny. I have also tried creating a new layer and removing the color yellow from the picture but that doesnt seem to work either.
View 2 Replies
View Related
Oct 26, 2013
I know that x6 comes with limited Picture Frames. I loaded, via preferences, the x5 set of frames that I had been using. All was well. Now my frames have vanished. (All but the original limited set). I've tried to reload them into x6. But x6 is refusing to find them. I'm using 64bit. Was before when all was well. Why can't preferences find them now? The thing is I rarely use Picture Frames so I may have forgotten how to reload them via Preferences.
(For interest sake I fired up x5 and the frames have also gone from it. The location was /My Documents/Corel Paintshop Pro/16.0/Picture Frames. The files are still there).
View 4 Replies
View Related
Dec 9, 2011
In the picture attachted there is a compostition I made through PhotoScape (I just have come from this software). How to do it in PaintShop X4. My traditional-old steps:
a) First I applied in each photo picture a picture frame (like a shadow).
b) Second I join all photo picture and logos in a big picture.
c) I inserted titles (people name) bellow each photo.
d) To conclude I applied a picture frame to the big picture (in PhotoScape this frame is called “shadow border”).
Just a comment: It seems Corel PaintShop has mostly “cartoon” picture frames. I tried to find out something like “PhotoScape shadow border” without success. Is there something similar available in PaintShop? Is it possible to add new picture frames to the PaintShop library?
View 5 Replies
View Related
Sep 7, 2011
I have Paint Shop Pro PHOTO XI. I want to shrink a photograph so when it's printed on a standard 6x4 print the picture only takes up a part of the print. Is this possible? If so, how do I go about it?
View 4 Replies
View Related
Feb 2, 2013
I have lots of picture tubes from an old version of PSP. I now have PSP X5. What is the correct format for the pictures? I have both psp and tub.
View 2 Replies
View Related
May 22, 2012
I have a picture of a shovel of which I want to change the red colour to blue.
What is the simpliest way to do this in Paint.NET?
I have tried many things things, but I get a lot of trouble with shadows and sun shine areas.
Attached Thumbnails
View 12 Replies
View Related
