I am designing a calendar. When designing the background is a solid black, but when I export or save as PNG it appears on the screen as dark grey. I'm self taught and don't know if it will print out grey or black.
View 3 RepliesWhy I'm getting a grey Flare when I open it with a black background, but it's in color when I open it in a white background?
I know that flare works better with a black background, but for any reason it looks grey and it's hard to create effects.
I'm trying to use a smoke brush in Illustrator CS5 and colour it blue. However, when I place a black square at the back of the image as a background, the brush appears to have a grey outer edge. I have tried other brushes as well and some produce the same results.
I am wondering if this may be a setting that I'm unaware of or something else.
Still trying to learn my D7000
Yesterday, I took a number of experimental shots (a red phone cord lying on a white background). The white background (an artists white canvas lying on the floor) was well lit from above using 5600K lights.
The shots were all taken using auto focus, auto exposure, etc and in the view finder everything appeared to be correct, but on later viewing the photos, the white background appears to be grey.
I have attached a sample image to show the grey colour.
especially when using the auto mode when taking the photos.
I am not concerned about the picture quality only the grey background and I did not undertake a WB as I thought that this was part of the auto mode when taking the photo. the shot was taken by half pressing the shutter release butto to ensure that everything was OK then continuing to fully press the button.
There's a transparency box you can check when you go to print.
View 1 Replies View RelatedNew to CDR X6 just having upgraded from CDR 8.
Printing a black and white layout to my HP LaserJet 4000 produces an image that appears to be grayscale instead of solid black. In other words, my text, line border I've put around the layout and graphics (for the most part), all appear about 70-80% black instead of SOLID black. Small text doesn't appear to be nearly as sharp because it looks like a halftone instead solid black. On one layout I just printed, the entire thing appears halftoned except for one vector graphic that did print in solid black. Strange. I figured I have something set incorrectly in the software or printer. Has to be the CDR X6 software though because all other programs output just fine.
the grey or coloured lines on screen are plot in black, even in the pdf preview. How can I obtain the chosen colours?
View 3 Replies View RelatedIm using Adobe Photoshop CC. Everytime I click Liquify a black screen appears instead of the image.I'm using Dell Inspiron 5520.
View 1 Replies View RelatedI think it might be the GPU but i used apple computers with intel hd 4000 and it didnt do that. I have amd hd 7750 with an i5 and 4gb ram. Photoshop doesnt run slow its just the picture going in and out.
View 11 Replies View RelatedWhy does my screen flicker when cropping and image turn solid black so I can not see image?
View 5 Replies View RelatedHow do I change my background screen colour in full edit, as it has gone from grey to bright pink!
I can't see where I need to go to change it back to grey!!
.jpg export screen shows a solid black area instead of my graphic image - why? but when I open the .jpg file that was exported, it looks correct (not a large black rectangle). why is the preview window in the export window showing a large black area? see attached screenshot.
View 9 Replies View RelatedI have just purchased this upgrade software having used XARA Xtreme4.0 for many years.How can I change the black background screen with white writing to grey with black writing?
View 9 Replies View RelatedI'm using .AI CS6. I am trying to type something and the font color is set to black. But only shows up grey. But all other colors work fine. Document color is set to RGB, not CMYK, or Greyscale. I'm totally at a loss... My customer is needing this tomorrow. So a really fast correct reponse would be FANTASTIC. Been woring on this artboard for a little over an hour and can't do what I need done. I open new Artboards and the same problem persists..
View 2 Replies View RelatedI'm using Ai CS6 64bit now on windows 8, and I have a problem with the black and grey colors, because they look like brown variations...In the past I hadn't similar problems, but recently I changed my notebook to an Asus KB56, from Acer.
I attached the 1st picture to show exactly what is the problem, the colors should to be all black, but they are brown...The second picture shows them in paint, which works perfect...
I have seen photos where the background is black. Is it possible to do this with Photo Pro X3 Ultimate? If so, how? I'm retired (read as "older" and not as sharp as a younger person) and new at digital photography.
View 5 Replies View RelatedI've got a series of portrait type images where I may want to change the background. Once I select the image to placing a solid background behind that image? For instance, in this image, perhaps a solid black background would look better. PSE7
View 6 Replies View RelatedI am creating a peice of artwork in illustrator. I have cut out the icecream image in photoshop and placed it in illustrator as a psd file. It looks fine in illustrator, looks like it should do. The problem occurs when I export to pdf, a black border around the ice cream image appears. However when I print the black border does not display. So the issue with the black border only appears on the pdf. Check out the attachment beow for example of what I mean.
View 5 Replies View Relatedwhen i go into the editor and pull up a picture and blue background appears behind the picture and circle enters the screen. how do i get out of this?
View 1 Replies View RelatedI am new to Illustrator and using a Mac. When I open Illustrator CS6 the background is not the expected grey color but whever other program hapens to be open. This changes to grey as soon as create a new drawing. Is this normal?
View 14 Replies View Relatedcan I alter the BACKGROUND COLOUR from the Grey to a lighter grey as in P/Shop Album 2.00 which is just what I want..I hate the darker colour as background..I have just purchased the Elements 11.
View 5 Replies View Relatedas a user of pse 6 I 'm used to work with darkgrey background in the organizer.
This works perfectly for quickly assessing brightness and contrast of pictures.
In pse 10 however I could not find any button to change the preset lightgrey background colour to darkgrey.
I was working with a document in PS and I must have inadvertantly done something to turn my background sceen to black. How do I return it to the standard white?
View 2 Replies View RelatedI am linking to the exact same background image file (TIF) in more than one illustrator file. This image is on the bottom layer in four different files.
The opacity on the image and the image's layer is set to 100% in all the files. In the dialog box for each of the layers that contain the image, the "Dim" control is unchecked. There are no other higher layers that contain artwork that might interfere with the image's appearance.
Yet...in two of the files, the image looks full and vibrant. In the other two files, the image looks dim and faded.
Is there another control that I'm missing that might be causing the image to be faded. (I want it to be full and vibrant.)
Since switching to Inventor 2013, all my colors that I had set in all my parts are a little off from what they should be. Especially white. All colors in 2013 that should be white (white, porcelian, snow) are all a shade of gray and no matter what I do to adjust it, it always is gray.
View 2 Replies View RelatedHere is what my artboard looks like. What I'm trying to do is just get the black shapes as one solid logo without the white showing. For example, if I were to place this in another Illustrator project, it would still have the white rectangles with full transperency. I tried a tut online, but when I place the AI file into another project, the WHOLE image is invisible.
If I were to open this AI file in Photoshop, I could use the Magic Wand to delete the white parts and leave just the black shape. I want to be able to resize the black shape and use it on banners, avatars, etc.
Background notes: I am using this for my gaming website and I would like to be able to use this for my logo. (Crossfire)
I have AI in CS5 and a PC running Windows 7 and am struggling to get this to work:
I drew a horizontal line across the artboard. On top of this is a large circle, and then I centered a smaller circle atop the large circle. I need the small circle area on BOTH circles to be transparent so that the line AND the color background I've chosen (for when this is imported to InDesign) will show through.
I looked around the forums for answers, and decided to select the smaller circle, go to the Transparency palette and select Knockout Group. But the center of the larger circle doesn't show through where the smaller circle is. I then selected both circles (because the line under both circles needs to show through) and then clicked on Knockout Group. Still no change. There is something else I need to know, so here are my questions:
Is there something about the formatting of the circles that needs to be done? (Like perhaps the smaller circle needs to be formatted with no color in it?)
Do all three objects need to be on different layers? And if that's the case, can I group objects on different layers? Also,...
All objects are grouped on one layer right now, AND I have a needed warp effect on them. Should I remove the warp effect before doing this and then restore the warp? I've tried doing this from Isolation Mode, but perhaps IM is in the way?
My company is switching from ctb files to stb files. With the ctb file, we make concrete hatch with two layers. A top layer with the concrete hatch pattern and a background layer with a solid hatch patern. The ctb file concrete plots the concete hatch black and the solid background hatch light gray. I am using civil 3d 2013 and the hatch allows a seperate background color mask. I am trying to make all my concrete layers (Top of Curb, Curb Flowline, etc.) a certain color scheme, i.e. shades of green. I would like my on screen concrete hatch patern to be a green color with a gray background, but plot the concrete hatch black with a gray background. I can not figure out how to do this without making two layers. Is there a way to use one layer and utilize the background color mask to show on screen green and gray, but plot black and gray?
View 4 Replies View RelatedI am, using Ai (CS6). I've produced a poster I'm fairly happy with, but black background is affecting red and green type on top of the black...
Possibly one hint towards a solution is that I have one photo with a transparency and the lettering that is on top of that transparency isn't affected by the black background.
The transparency was started by creating a cut-out of a mugshot in Ps CS6, using the magnetic tool, previously creating a transparent background layer.
Anyway, the long and the short is, if a tiff photo transparent background can keep out the black background, how can I create a transparent layer with similar properties.
For my business card design I have white text overlapping an area of very white grey- causing readability issues (insufficient contrast). It looks great apart from this one problem, so I still want to keep my white text and light background and fix it by separating the text and background with a darker drop shadow..
First, I added a black drop shadow to the text- but this was not enough to increase readability (text still looked faded on background as drop shadow was too subtle at 85% opacity, 0.04" blur) so I added a drop shadow to my drop shadow (100% opacity, 0.02" blur + 18% opacity, 0.02" blur). This produced a heavier drop shadow effect for my text as desired but, for some reason, the text came out slightly grey in print (offset run). It seems the drop shadow somehow got printed over the text itself to some extent- turning the white text somewhat grey (and so not looking as clean as intended).
How could this dropshadow bleed into the text happen? Is it to do with the fact I added a drop shadow to my drop shadow? I would have thought that, even then, the text should entirely overlap all of the drop shadow as the text is the top layer in the group.
What can I do to ensure that drop shadow does not print over text in any way in future? Do I have to stick to only one layer of dropshadow-or is there something else I'm missing?
I use to be able to click on the outer box of text and give it a white fill to clarity when placing text over compex flow diagrams in CS3. I don't seen to be able to do this is CS6?
View 5 Replies View Related