Since switching to Inventor 2013, all my colors that I had set in all my parts are a little off from what they should be. Especially white. All colors in 2013 that should be white (white, porcelian, snow) are all a shade of gray and no matter what I do to adjust it, it always is gray.
View 2 RepliesHave installed Inventor 2013 product suite .
Using in the part environment: Inspect / Analysis / both, Draft or Surface , no color band or color gradient appears.
Still trying to learn my D7000
Yesterday, I took a number of experimental shots (a red phone cord lying on a white background). The white background (an artists white canvas lying on the floor) was well lit from above using 5600K lights.
The shots were all taken using auto focus, auto exposure, etc and in the view finder everything appeared to be correct, but on later viewing the photos, the white background appears to be grey.
I have attached a sample image to show the grey colour.
especially when using the auto mode when taking the photos.
I am not concerned about the picture quality only the grey background and I did not undertake a WB as I thought that this was part of the auto mode when taking the photo. the shot was taken by half pressing the shutter release butto to ensure that everything was OK then continuing to fully press the button.
I am designing a calendar. When designing the background is a solid black, but when I export or save as PNG it appears on the screen as dark grey. I'm self taught and don't know if it will print out grey or black.
View 3 Replies View RelatedI try to use the color grey its always redish grey and never grey.
I tried changing my color settings from photoshop but it still wont work.
I'm using this tool in CS4 on an image with a transparent background.When I set the foreground color to R165 G165 B165 and apply, the resultant color on my image is R64 G64 B64.
View 4 Replies View RelatedI have a few xrefs loaded into my drawing and I want them all to appear greyscale (color 9) so that whatever I draw on top of the xref is in color and is easy to spot..
I have tried putting the xref on a layer that is default color 9 but the xref is still shown in color. How to set the xref to color grey?
I used by layer and black 250 color also. You can see that the gravel, the concrete foundation and the water hatch is grey.
View 7 Replies View RelatedI have few text labels and lines in a drawing that supposed to have black color.
However, color at some point changed to grey.
Color- by layer, transparency- by layer, viewstyle- 2D Wireframe...
The thing is if I double click on a text it turns to black but after regenall it turns to grey again!
Already did restart and everything. Looks like there is maybe some variable for color control, I don't know.
I am currently running Map 3D 2012 with CadWorx and I am having an issue with one of my multi tab drawings. Any object set to plot grey (any grey), that is in paper space, is plotting black only in one of my layouts. similar objects in model space and in both spaces on other layouts are all plotting accordingly.
View 0 Replies View RelatedI'm trying to add a color cast to a grey, contoured button shape (defined by a vector mask), by overlaying it with an adjustment layer with a solid green fill and setting the blend mode to "multiply."
The shape layer has transparent pixels around the perimeter, so I would not expect a "multiply" operation to result in visible green there. But it does. That's no good. I need to export this image to a PNG with the transparency intact.
I can see that the green adjustment layer has a "Color Fill 1 Mask" channel, but copying the shape layer and pasting it into that mask channel doesn't seem to work. The display shows a very thin outline of the vector shape, but I can't appear to do anything with it.
when i want to draw something with a color it turns to gray?
it happens with a different color.
In my PS7.0 I have lost my greys...It always shows brown even when I enter #333333 or anything grey. If I transfer the color to Image ready it shows the color in grey like it should be seen.
View 6 Replies View RelatedSometimes I can't draw with any color other than grey
I'll see green (for example) as my foreground color. However, when I apply it, it turns out as grey
I can open up other files and the colors work perfectly. It is exclusive to this file. I pened this file in Ms Paint and it will only paint grey on this file as well.
Is the file corrupt or is this a form of copyright protection?
For this school project I need to make a design for a big wall in an accountancy/economy theme. My idea is to desaturate a bunch of pictures related to the theme, and make the middle or lower grey tones green.
View 1 Replies View RelatedWhen I click on foreground, even if black is selected, I click around that box, and I inevitable get blues and greens. How can I get an easy variety of greys to choose from to click on to make the forgound color a light grey to taste?PS, I'm almost lost with eyedropper, I remember being able to click that on documents, even outside PS, but it's not working for me at all now in that respect.
View 8 Replies View RelatedI recently had to get a new computer and reinstall Photoshop, I also did the update. Now when I use my color picker outside of Photoshop, it only pulls up a grey color, not the actual color I am sampling.
It works fine within the Photoshop document but now when sampling outside of it. Was this the update that messed up this functionality? Or is there a setting I need to set. All my preferences are the same from my old to my new computer.
If there is a way to tell Photoshop, and in a CMYK or RGB file, that I want to make all the 100% blacks in a grey scale layer a solid specified color, and all greys just percentages of that solid color? And to be able to do this without having to use spot channels or dial in CMYKs via Channel Mixer? In other words, a "one-click" method, or close to it.
View 9 Replies View RelatedI make a duplicate layer of a car photo and use the solarization tool and then erase the portion of the car I want to be in color.
View 6 Replies View RelatedI'm creating images in Photoshop and printing to a Xerox solid ink printer. If I print in greyscale everything is fine, but if I have an image that has both color and B&W portions, the greys come out green (or brown depending on whether I print from CMYK or RGB). Is there any way to have a portion of an image in a color space and others in greyscale?
what I might try as far as the printer? If I print CMYK the greys come out really green but all the other colors are good. If I print RGB the greys come out browner (which is a little better), but other colors get muddy.
Is there any way to get a printer to stop trying to "interpret" greys as a color when in a color mode?
Whenever i render my project it always comes in grey color after rendering.
View 4 Replies View RelatedI am new to Illustrator and using a Mac. When I open Illustrator CS6 the background is not the expected grey color but whever other program hapens to be open. This changes to grey as soon as create a new drawing. Is this normal?
View 14 Replies View RelatedI'm using Ai CS6 64bit now on windows 8, and I have a problem with the black and grey colors, because they look like brown variations...In the past I hadn't similar problems, but recently I changed my notebook to an Asus KB56, from Acer.
I attached the 1st picture to show exactly what is the problem, the colors should to be all black, but they are brown...The second picture shows them in paint, which works perfect...
I've recently picked up Photoshop CS6 and i'm having a weird problem regarding the color cyan.
Whenever i use this color it appears as black.
How do i get this fixed??? im clueless
EDIT: When i drag the window im working in around the colors appears as normal but as soon as i let the window go, the cyan turns black again.
I can not use the color replacement tool to replace a grey/black color on a person's head to all black. The tool keeps getting a grey not a black, even after I select black from the swatch.
Does the image file need to be something else than RGB? I have tried other color and it does work. I have tried red and it will replace all of the grey&black, but .........
Can you change the skin colour of CS5 to any colour you wish or are you stuck with mid grey?
View 2 Replies View RelatedI downloaded an action from Adobe web site and when I have my actions set to button mode, the button for this action is blue while the rest are all grey. I also noticed that the default frame action buttons are orange. Is there a way to color code these action buttons myself? It would be nice to catagorize them by colors.
View 4 Replies View RelatedWhy I'm getting a grey Flare when I open it with a black background, but it's in color when I open it in a white background?
I know that flare works better with a black background, but for any reason it looks grey and it's hard to create effects.
I just installed CS3 in Windows Vista Ultimate x64 on my PC and I have my working color space set as sRGB. The color is dull when opening documents in any Adobe application with the working color space set to sRGB. The color is fixed if I change the working profile to my monitor profile which is "Monitor RGB - Dell 2407WFP-HC"
When in the "Monitor RGB - Dell 2407WFP-HC" profile whenever I open an existing file Photoshop alerts me that the embedded color profile is different than my working profile (all of my existing files are managed as sRGB and on my previous computer the sRGB profile looked perfect.)
Photoshop I could theoretically live with but the same problem occurs in Acrobat and changing the "Working Profile" in Acrobat has no change on how the sRGB managed PDF is being displayed. The same PDF will look fine on another computer.
How do I get sRGB color to display correctly in Adobe applications and not look dull and muted?
Additional Information: The problem is still prevalent when accessing the computer with Remote Desktop which leads me to believe it has nothing to do with my monitor or the video card I am using.
2d to 3d no cube appears when I click on base view diologe box appears left hand corner that it
View 2 Replies View RelatedI have an image, all black of a ballerina on one layer, with black text on another. I am trying to put a bouquet of red roses at her feet, but it turns shades of grey when I attempt to do that.
View 2 Replies View Related