Revit :: Project Always Comes In Grey Color After Rendering
Oct 2, 2013Whenever i render my project it always comes in grey color after rendering.
View 4 Replies
ADVERTISEMENT
Revit :: Change Color Of A Rendering Background
Feb 27, 2013I know you can change the color of a rendering background, use and image, change clouds etc but can you just turn the background OFF? I can't find where to do this in 2013
View 5 Replies View RelatedRevit :: Color Balance Changes When Saving Render To Project?
Mar 14, 2013I'm running Revit Architecture 2012. I did a render and it looks fine in the default {3D} View. I selected to save it to the project and when I go to the renderings view to recall it, the color balance is all shifted off way way to the blue end. I tried going back over to render dialog and adjusting the white point all the way up, and it had the expected effect in the {3D} View (shifting everything to overblown orange), but nothing changed at all in the renderings View when I tried to resave it after making the adjustment.
View 3 Replies View RelatedRevit :: Color Of Family Component Is Not Visible In Project
Jul 25, 2013Made a family with two family types, a red and a blue. when i load it into my project it comes up gray..Another component family the color comes in fine
View 1 Replies View RelatedPhotoshop :: Color Grey Is Always Redish Grey
Feb 10, 2004I try to use the color grey its always redish grey and never grey.
I tried changing my color settings from photoshop but it still wont work.
Photoshop :: 3D Rendering CS6 Results In Grey Box In Upper-left Corner
May 5, 2013I recently found out about the 3D features in Photoshop and I started to experiment with them. I've created some nice extrusions. However, when I try to start the render of my current project, it waits a short while and then continues on rendering the rest of the image, leaving a grey box in the upper-left corner. When I zoom in, I can see that the texture is in place and the box starts at the border of the 3D object, not at the border of the image.
I'm running Windows 7 Home Premium x64, Intel i5-2430M (2.4 GHz), nVidia GeForce GT555M (1 GB) and 8 GB of RAM. I've rendered my other projects successfully with the same settings (all highest quality, though very slow). Could this possibly be a bug in the software, is it an error of mine or is this 3D document just irrenderable?
Photoshop :: Grey Screen When Opening Old Or New Project In CS 5.1?
Oct 12, 2012Grey Screen when opening a old or new project in CS 5.1....I can then click on the outside of the screen and see the project screen but as soon as I release the mouse button it goes grey again.
View 1 Replies View RelatedRevit :: Custom Railing Insert Project To Project
Sep 9, 2011I used railing tools and created railing in the project files. i want to change rail and Baluster.i created metric baluster and rail from family and saved in the local drive. i used in to my project also it is working fine.
i want to use this railing to some other project. how to get it either copy past or revit link or any other way because the railing created in project file.
VideoStudio :: Rendering 40 Minute Project As Blu-ray H264 1920x1080
Jan 21, 2012I am trying to render a 40 minute project as a blu-ray H264 1920x1080 file that I can then play on windows media player. I normally have no problems on short 5 min projects but on this one it tells me "frame 2914 unreadable" how do I find frame 2914?
View 5 Replies View RelatedVideoStudio :: No Audio When Playing Project In Share Or After Rendering?
Jan 22, 2012I am having a very difficult time trying to figure out what is wrong with my audio in VSPx4.
When I put a video in the timeline and click on it so it is on the "clip" the video plays fine but the minute I switch it to "project" the audio dissappears. If I render it in any format, the audio doesn't return. Also, if I multi-trimm a video I am no longer able to get audio either.
Lastly, if I split the audio from the video I cannot play the project at all. It just gives me a frozen screen...
I have re-installed VSPx4 and have all the patches updated.
Photoshop :: Add Color Cast To Grey?
Jul 24, 2012I'm trying to add a color cast to a grey, contoured button shape (defined by a vector mask), by overlaying it with an adjustment layer with a solid green fill and setting the blend mode to "multiply."
The shape layer has transparent pixels around the perimeter, so I would not expect a "multiply" operation to result in visible green there. But it does. That's no good. I need to export this image to a PNG with the transparency intact.
I can see that the green adjustment layer has a "Color Fill 1 Mask" channel, but copying the shape layer and pasting it into that mask channel doesn't seem to work. The display shows a very thin outline of the vector shape, but I can't appear to do anything with it.
Photoshop :: Color It Turns To Grey?
Jul 15, 2009when i want to draw something with a color it turns to gray?
it happens with a different color.
Photoshop :: PS7.0 I Have Lost My Grey Color
Apr 27, 2005In my PS7.0 I have lost my greys...It always shows brown even when I enter #333333 or anything grey. If I transfer the color to Image ready it shows the color in grey like it should be seen.
View 6 Replies View RelatedGIMP :: Can't Draw With Any Color Other Than Grey
Aug 8, 2011Sometimes I can't draw with any color other than grey
I'll see green (for example) as my foreground color. However, when I apply it, it turns out as grey
I can open up other files and the colors work perfectly. It is exclusive to this file. I pened this file in Ms Paint and it will only paint grey on this file as well.
Is the file corrupt or is this a form of copyright protection?
Photoshop :: Which Color Mode In CS4 Is Best To Use For 2-color Project / Grayscale Or CMYK
Mar 21, 2012The project is a photo montage. It was 4-color, now must become 2 colors. So I've changed each of the original 4-color photos (jpg and eps) into separate psd files (as grayscale/duotone/montage-and assigned it One pantone color)
In a new psd "montage" file, I plan to place each photo on its own layer, adjust tints, transparency, etc, to create one new montage/flattened.I'm not sure which color mode is best when setting up this new file, CMYK or grayscale?
Once the PS doc is done, the job will be saved as a PDF for 2-color printing.I want to insure the 2 pantone colors separate properly at press.
Revit :: Doesn't Use GPU For Rendering At All
Feb 7, 2013I have an intel 3570k cpu and an nvidia gtx 670 gpu, and it only uses my gpu for the 3d clview, but when it renders photos, it only uses my cpu, which makes rendering take so much longer.
i5 3570k@4.4ghz gtx 670, 8gb ddr3 1600mhz
Revit :: Not Responding When Rendering?
Jul 12, 2011PC I am using Revit Architecture on is
Windows 7 Professional
Intel Core i7 3.4ghz
Ram 16gb
64-bit OS
When rendering a job the program stops responding. The task manager shows the cpu working hard but the memory is not being used at all. Windows reports failure to recover program and the application exits.
Photoshop :: Replacing Some Grey Tones With Color
Nov 13, 2013For this school project I need to make a design for a big wall in an accountancy/economy theme. My idea is to desaturate a bunch of pictures related to the theme, and make the middle or lower grey tones green.
View 1 Replies View RelatedPhotoshop :: How To Get Light Grey Into Foreground Color
Oct 28, 2012When I click on foreground, even if black is selected, I click around that box, and I inevitable get blues and greens. How can I get an easy variety of greys to choose from to click on to make the forgound color a light grey to taste?PS, I'm almost lost with eyedropper, I remember being able to click that on documents, even outside PS, but it's not working for me at all now in that respect.
View 8 Replies View RelatedPhotoshop :: Color Picker Only Shows Grey Outside Of Doc
Aug 21, 2013I recently had to get a new computer and reinstall Photoshop, I also did the update. Now when I use my color picker outside of Photoshop, it only pulls up a grey color, not the actual color I am sampling.
It works fine within the Photoshop document but now when sampling outside of it. Was this the update that messed up this functionality? Or is there a setting I need to set. All my preferences are the same from my old to my new computer.
Photoshop :: Grey Scale Layer To Specified Color
Jun 3, 2011If there is a way to tell Photoshop, and in a CMYK or RGB file, that I want to make all the 100% blacks in a grey scale layer a solid specified color, and all greys just percentages of that solid color? And to be able to do this without having to use spot channels or dial in CMYKs via Channel Mixer? In other words, a "one-click" method, or close to it.
View 9 Replies View RelatedAutoCAD Inventor :: Color Appears As Grey
Aug 30, 2012Since switching to Inventor 2013, all my colors that I had set in all my parts are a little off from what they should be. Especially white. All colors in 2013 that should be white (white, porcelian, snow) are all a shade of gray and no matter what I do to adjust it, it always is gray.
View 2 Replies View RelatedPhotoshop :: [portions Of Grey Image Color]
Oct 9, 2007I make a duplicate layer of a car photo and use the solarization tool and then erase the portion of the car I want to be in color.
View 6 Replies View RelatedPhotoshop :: Printing Grey In Color Space
Sep 9, 2008I'm creating images in Photoshop and printing to a Xerox solid ink printer. If I print in greyscale everything is fine, but if I have an image that has both color and B&W portions, the greys come out green (or brown depending on whether I print from CMYK or RGB). Is there any way to have a portion of an image in a color space and others in greyscale?
what I might try as far as the printer? If I print CMYK the greys come out really green but all the other colors are good. If I print RGB the greys come out browner (which is a little better), but other colors get muddy.
Is there any way to get a printer to stop trying to "interpret" greys as a color when in a color mode?
AutoCAD 2010 :: How To Set XRef To Color Grey
Jun 28, 2012I have a few xrefs loaded into my drawing and I want them all to appear greyscale (color 9) so that whatever I draw on top of the xref is in color and is easy to spot..
I have tried putting the xref on a layer that is default color 9 but the xref is still shown in color. How to set the xref to color grey?
Illustrator :: Background Is Not Expected Grey Color
Dec 18, 2013I am new to Illustrator and using a Mac. When I open Illustrator CS6 the background is not the expected grey color but whever other program hapens to be open. This changes to grey as soon as create a new drawing. Is this normal?
View 14 Replies View RelatedIllustrator :: Black And Grey Color Look Like Brown?
Apr 10, 2013I'm using Ai CS6 64bit now on windows 8, and I have a problem with the black and grey colors, because they look like brown variations...In the past I hadn't similar problems, but recently I changed my notebook to an Asus KB56, from Acer.
I attached the 1st picture to show exactly what is the problem, the colors should to be all black, but they are brown...The second picture shows them in paint, which works perfect...
Revit :: Car Parking Not Showing Up In Rendering?
Apr 24, 2012why my parking line don't show in the rendered site plan?
View 3 Replies View RelatedRevit :: Lights Don't Show As ON When Rendering
Apr 28, 2010I am trying to render using the recessed can lights and they light my rendering but the lights themselves don't look line they are emitting light. It looks odd. I have the same problem with some of my 2x4 fixtures where light does show on the floor but the lights themselves don't seem to be on.
View 4 Replies View RelatedRevit :: Materials Not Rendering On Cloud
Mar 26, 2012None of my custom materials are rendering on the cloud. If I render it on REVIT, they come out just fine. Is there something that I need to do to get my materials to show up?
View 1 Replies View RelatedRevit :: 2012 Rendering Stops At 26%?
Jun 18, 2012Rendering at high quality, exterior sun only, 150 DPI and the image is about 9' tall x5' wide. Everything goes great until it hits 26%. Then the bar goes full on 100% but the image is only 26% rendered.
I have a 2gb video card, 4.1Ghz overclocked processor and about 8GB of RAM. Perhaps I havn't allocated enough memory to render an image of this size?
