Photoshop :: Which Color Mode In CS4 Is Best To Use For 2-color Project / Grayscale Or CMYK
Mar 21, 2012
The project is a photo montage. It was 4-color, now must become 2 colors. So I've changed each of the original 4-color photos (jpg and eps) into separate psd files (as grayscale/duotone/montage-and assigned it One pantone color)
Â
In a new psd "montage" file, I plan to place each photo on its own layer, adjust tints, transparency, etc, to create one new montage/flattened.I'm not sure which color mode is best when setting up this new file, CMYK or grayscale?
Â
Once the PSÂ doc is done, the job will be saved as a PDF for 2-color printing.I want to insure the 2 pantone colors separate properly at press.
I am a lifetime user of Adobe products, everything always updated to the latest, but a little stumped by this one... I opened a new document for print, specifying cmyk color and now, when I try to choose a color and apply to an object it only comes out in grayscale. What am I not understanding? as this is a first for me. I've looked back into document set up but am missing what ever it is that will not allow me to display or show color in my document.
I have a complex pattern, that looks brilliant with a color layer. However, it was originally created RGB.
I converted the color to CMYK for print, and all the color disappears! Not that the layer is deleted, but the color layer appears Grayscale. The only area where color shows up are in the pieces that are at 50% transparency (see purple diamond). I have all my color areas set to CMYK including the color pallet.
The color will show if I set the layer to multiply, but it doesn't look the same way as it does when its in RGB mode.
I need to create a document, which i want to print, in CMYK mode, but this is not possible on Photoshop elements 5. Apparently Photoshop doesn't support CMYK. Some of my colleagues are graphic designer who also work with Photoshop and they say, that CMYK is always available... I don't understand why it's not available on my software. Do i need to change the setting or something?
Is there a best setting for the mode, color settings, and color profiles when printing a grayscale vector illustration to a monochrome laser printer? I am making vector maps, and right now they are mostly black line and black text with only the K values in CMYK. There are some gray tones—for example water areas are 10% K, with no C, M or Y. Would it make any difference if I used RGB mode values at 100% (255,255,255), or a rich black in CMYK (such as 40C, 30M, 30Y, 100K)? I printed in K only at 1200dpi to a Generic Gray Gamma 2.2 profile, and it doesn't look too bad. There aren't many of the lines that are really jagged. I just wondered if there are better settings.
I'm using Mac OS 10.6, Illustrator CS6, and a Brother HL-5470DW monochrome laser printer.
Create a new document in X5. Choose CMYK as the "Primary Color Mode" in the "Create a new document" dialog box.
Draw a rectangle. The Eyedropper Tool tells me it is RGB 0, 0, 0. Shouldn't it be CMYK 0, 0, 0,100? Is there a simple way to fix this to default to CMYK?
Every time I try to choose a color in CMYK it always gives me the exclamation mark with a color that isn't even close to what I'm trying to use. When I click on the color below the exclamation, it still won't give it to me. What is the purpose of this and how can I get it to give me the proper color?
Having a bit of trouble as Illustrator CS6 (that I've set to a default color mode of CMYK) is opening CS5 CMYK files as RGB color profile. I don't get a choice. And so it is messing with my color palettes when I convert back to a CMYK color profile.
I have over 900 barcodes provided in EPS format. When I open them in illustrator, they are coming in as an RGB color space file. I need them gray scale solid black in CMYK color mode. I can batch using actions to convert the artwork using "Edit Colors > Convert to Grayscale". However, the document color mode remains RGB. It appears, even after using "Convert to Grayscale", that the RGB color mode goofs up the placed .ai file in InDesign, treating it as RGB and seeing it as a mix of CMYK rather than the 100% black only it needs to be for proper sharp printing. Â The actions pallet doesn't record converting the document color mode. Is there a way to automate that file conversion so they are all saved as CMYK rather than RGB, or am I stuck opening each of the 900+ files manually?
Is there a way to export a document @ a different resolution than 72DPI? I know I can set the horizontal/vertical scale to save it at a larger dimension at 72DPI, but I need the file to be actual size and 300DPI. Â This is part of a larger process, and I'd prefer to do the entire process from Illustrator, and not have to open the files in Photoshop to change the size/resolution. Â Also, is it possible to change the color mode to CMYK or Greyscale for the exported Jpeg?
When using the brush tool what is the difference between using the brush in color mode on a normal layer vs using the brush in normal mode on a color mode layer?
I have a color picture, and I want to convert it to B&W, and then I want to add another color to it (for example – red). I don’t want to paint some areas in it, I want for example to keep all the red parts of the picture, or only part of the red parts.
It something like in the movie Schindler's List, in the B&W scene where you see a little girl with red coat.
I have a PSD file open and I added a new layer via the copy command. I have added a Layer Mask to the new layer and I'm trying to use the Brush Tool with black forground to cover part of the new layer. I'm following an online tutorial step by step, but when I try to use the Brush Tool I get "could not use color replacement tool because it only works in full color mode". The Image>Mode is set to RGB.Â
In the Printer Settings drop down menu both Color Mode and Print Mode are grayed-out. This just happened I cannot think of anything I've done differently.
I'm using OS 10.6.8 and the latest Epson drivers for the 3880. I have re-installed both PS and the Epson drivers. If I print from Acrobat Reader everything seems to work fine, this only is happening in Photoshop CS5.
I'm attempting to convert a grayscale image into a one-color (preferably black) image for screen printing on a white background. I was thinking something along the lines of gradient created with different-sized black dots?
I have seen several people with pictures that have the entire image in grayscale but they have one color or one object in the picture that remains in color.
I just installed Photoshop 6 and my color pallete is only in greyscale. As I was installing it there was a message about color's, but I had no clue what it was talking about.
I'm looking for help to assign spot color (some at 100%, others as tints) of a single PMS color into selected areas of grayscale images. I understand how to use the spot color channel but I don't know how to assign tints of my color. When I import the images into InDesign, the color swatches show various instances of my PMS color and when I get ready to package the InDesign file, it shows duplicates of the color. Don't I need all instances of the single PMS color to separate onto one plate, while the black (and its tints) separate to another? I want a two-color end result.
I am using Elements 6 for Mac with OS 10.6. My printer is a Canon MG8120, which uses several color cartridges (including a black and gray) and a pigment black cartridge. Â Today I tried to print a B&W line-art document, and it printed in a faint yellow. I tried another B&W doc, and the same thing happened. I exported the documents as both .pdf and .jpeg, and they printed in B&W using the Preview application. Â As it happens, all the color carts in my printer are either low or out of ink. Only the pgiment black is full (I put it in yesterday). So I wonder if my B&W docs have been printing from the color carts and not the pigment black cart. Is there any way to get PSE to use the pigment black cart?
•Need to plot entire drawing in Greyscale, with that in mind I need to select X number of objects in the drawing to plot in Color. So in the end I will have a complete drawing in greyscale and a selection of objects in color so they stand out. •Now, I know I can do this through the .ctb file but I have many colors / layers and many objects so this will take a long time to do. •Is there an app or override option I can use to do this?
I need to transform a selection of ranges of grayscale image in colors. For example: using GSM of a gray scale image as a parameter I want to recode pixels from 0 to 20 in red, 21 to 40 in orange, 41 to 60 in yellow and so forth... until pixel valued 256 in GSM.
Is there a preference in GIMP to display color channels in grayscale? Rather I should ask, has this issue been resolved because I know at one time it was a big difference between PS and the GIMP. And yes, I know that I can decompose and recompose...
how to use the match color tool to automatically convert one grayscale image into multiple output images based on a collection of color swatches? Or a better process to achieve this automated?
I have all the swatches in psd files in one directory. I can do them one-by-one but I was wondering if there was a way to automate this process and have it spit out and save the different images automatically based on the saved swatch colors.
