For this school project I need to make a design for a big wall in an accountancy/economy theme. My idea is to desaturate a bunch of pictures related to the theme, and make the middle or lower grey tones green.
View 1 Replies
To create a special effect (but not TOO garish!) I'd like to change this brownish meadow so that it looks much more like one of the swatches from my color swatches panel.
Do I need to create a new adjustment layer, or are there other approaches? Below is a screen shot.
I try to use the color grey its always redish grey and never grey.
I tried changing my color settings from photoshop but it still wont work.
I know Bruce Beard has the hair and skin tone color swatches, but I could have sworn I've seen palettes for eyes and lips, too. Anyone know of any off-hand?
View 9 Replies View RelatedI have a colored object, and I have a specific swatch of color that I need to change the current color of the object to. The problem I'm having is that the specific color that I'm trying to apply to the object doesn't look integrated with the object itself, it just looks like I've applied a color film over it. It's milky-looking and there's not enough contrast. I've tried adjusting levels, using different blending modes, using the Match Color command ..I can't seem to keep the integrity of the color I'm applying to the object, while still keeping the integrity of the details of the object itself. How should I tackle this using multiple layers and blending modes, and so the new color looks integrated and believable?
View 8 Replies View Relatedtrying to replace the color of my deck with paint samples i got for my company.. im trying to match it, but if u look in the forground color selector its the one i want but when i pain it on it comes out different...
View 1 Replies View RelatedI'd like to know how can I change the color of an element from a given image.
I've got the attached image, and I'd like to change the yellow shape by recoloring it to red ....
I have a black dash cluster (from a car), black background with white markings for the Revs and Km/hr. I will be scanning it in real size....
What I want to know is how do I replace the black with a picture leaving the white overtop...
This will be then printed to vinyl then stuck over cluster ....
I've read all the posts about color replacement, but I still can't get it right. I'd like to make the color of her dress gold to match the couch. I tried using the eye dropper,
View 9 Replies View RelatedI am a texture designer as a hobby for an online game called Eternal Lands.
Ususally I just make my own textures, but I wanted to edit an existing texture this time. The texture is for armor called Red Dragon Armor, it has red scales on it.
I want to replace these red scales (without taking away the details such as the streaking and the scratches) with gold. I tried using "Color select" then "colorify" but it didn't come out quite right.
What is the usual method for changing the color of a section of an image if there are details and you don't want to use the "bucket fill" option?
I have 240 layers which are the frames for an animation. The animation is of a rendered CAD model on a white background. I want to change the background color to a specific RGB color (or transparent) to match the website bg.
Is there a way I can replace one color with another on multiple (or all) layers in one operation? I'm using Photoshop CC.
I have scanned our baseball teams calendar schedule which has the days colored-coded; red for home games and white for away games. Also, they certain special home dates colored in a light blue. I want to replace all the light blue days with the same red that is already in use on the rest of the schedule.
I can find no way to use the red as the sample color, or transpose the RGB values shown into corresponding Hue, Saturation and Lightness values used in the Replace Color tool.
I do this every year and in the past I kept a old copy of Paintshop for this single task, but have finally deleted it and want to figure out how to do this simple task using my Photoshop 7.0.
I have a picture that is all black and white. All I want to do is replace the black parts with a different color. I have tried using the replace color comand and I can't get it to work. I know this should be the easiest thing in the world to do.
View 4 Replies View RelatedI am looking to take an image of a seat and change the current material to a different material. The new material will be both a different color and a different texture so just changing the color with an adjustment layer will not work, but may be part of the process. I need this to look very realistic; complete with shadows and highlights.
Is there a way to take a sample from the material I want to use and apply it quickly? I have been using photoshop for a while now and can't think of a way to do this. I am thinking this may be a job for a different program, but if I can do it in photoshop that would be wonderful.
Do I need to re caligrate the monitor or make some kind of adjsutment?
View 1 Replies View RelatedIf I select a color using the Magic Wand Tool, how can I replace the selected color witht the foreground color?
View 2 Replies View RelatedI'm trying to add a color cast to a grey, contoured button shape (defined by a vector mask), by overlaying it with an adjustment layer with a solid green fill and setting the blend mode to "multiply."
The shape layer has transparent pixels around the perimeter, so I would not expect a "multiply" operation to result in visible green there. But it does. That's no good. I need to export this image to a PNG with the transparency intact.
I can see that the green adjustment layer has a "Color Fill 1 Mask" channel, but copying the shape layer and pasting it into that mask channel doesn't seem to work. The display shows a very thin outline of the vector shape, but I can't appear to do anything with it.
when i want to draw something with a color it turns to gray?
it happens with a different color.
In my PS7.0 I have lost my greys...It always shows brown even when I enter #333333 or anything grey. If I transfer the color to Image ready it shows the color in grey like it should be seen.
View 6 Replies View RelatedI am wondering if there is a way that I could replace colors automatically. I know there are tools like Color Replace but it works with one palette at a time. What I am looking for is:
suppose a particular design has 4 colors in RGB mode. A,B,C and D
A: 2-72-127
B: 1-49-87
C: 187-153-238
D: 8-55-255
And lets assume that I have another set of colors I want to change to: E, F, G and H
E: 0-130-175
F: 95-38-5
G: 140-100-0
H: 130-120-120
I want to change from A to E, B to F and so on so forth. Is there a way that I can do this?
When I click on foreground, even if black is selected, I click around that box, and I inevitable get blues and greens. How can I get an easy variety of greys to choose from to click on to make the forgound color a light grey to taste?PS, I'm almost lost with eyedropper, I remember being able to click that on documents, even outside PS, but it's not working for me at all now in that respect.
View 8 Replies View RelatedI recently had to get a new computer and reinstall Photoshop, I also did the update. Now when I use my color picker outside of Photoshop, it only pulls up a grey color, not the actual color I am sampling.
It works fine within the Photoshop document but now when sampling outside of it. Was this the update that messed up this functionality? Or is there a setting I need to set. All my preferences are the same from my old to my new computer.
If there is a way to tell Photoshop, and in a CMYK or RGB file, that I want to make all the 100% blacks in a grey scale layer a solid specified color, and all greys just percentages of that solid color? And to be able to do this without having to use spot channels or dial in CMYKs via Channel Mixer? In other words, a "one-click" method, or close to it.
View 9 Replies View RelatedI make a duplicate layer of a car photo and use the solarization tool and then erase the portion of the car I want to be in color.
View 6 Replies View RelatedI'm creating images in Photoshop and printing to a Xerox solid ink printer. If I print in greyscale everything is fine, but if I have an image that has both color and B&W portions, the greys come out green (or brown depending on whether I print from CMYK or RGB). Is there any way to have a portion of an image in a color space and others in greyscale?
what I might try as far as the printer? If I print CMYK the greys come out really green but all the other colors are good. If I print RGB the greys come out browner (which is a little better), but other colors get muddy.
Is there any way to get a printer to stop trying to "interpret" greys as a color when in a color mode?
I have a low-res bitmap. It has a dark grey background with a plain white icon. The transitional pixels are various shades of grey.
I want to make the dark grey into a bright blue, leave the white white, and have the transitional pixels changed to maintain their respective "in between" values.
I do have Photoshop CS2 but I though Xara was more likely to be able to do this.
I can not use the color replacement tool to replace a grey/black color on a person's head to all black. The tool keeps getting a grey not a black, even after I select black from the swatch.
Does the image file need to be something else than RGB? I have tried other color and it does work. I have tried red and it will replace all of the grey&black, but .........
Can you change the skin colour of CS5 to any colour you wish or are you stuck with mid grey?
View 2 Replies View RelatedI downloaded an action from Adobe web site and when I have my actions set to button mode, the button for this action is blue while the rest are all grey. I also noticed that the default frame action buttons are orange. Is there a way to color code these action buttons myself? It would be nice to catagorize them by colors.
View 4 Replies View RelatedI have an image, all black of a ballerina on one layer, with black text on another. I am trying to put a bouquet of red roses at her feet, but it turns shades of grey when I attempt to do that.
View 2 Replies View Relatedcan I alter the BACKGROUND COLOUR from the Grey to a lighter grey as in P/Shop Album 2.00 which is just what I want..I hate the darker colour as background..I have just purchased the Elements 11.
View 5 Replies View Related
