AutoCAD Civil 3D :: Hatch Background - Color Mask To Show On Screen Green And Gray But Plot Black And Gray
Feb 27, 2013
My company is switching from ctb files to stb files. With the ctb file, we make concrete hatch with two layers. A top layer with the concrete hatch pattern and a background layer with a solid hatch patern. The ctb file concrete plots the concete hatch black and the solid background hatch light gray. I am using civil 3d 2013 and the hatch allows a seperate background color mask. I am trying to make all my concrete layers (Top of Curb, Curb Flowline, etc.) a certain color scheme, i.e. shades of green. I would like my on screen concrete hatch patern to be a green color with a gray background, but plot the concrete hatch black with a gray background. I can not figure out how to do this without making two layers. Is there a way to use one layer and utilize the background color mask to show on screen green and gray, but plot black and gray?
View 4 Replies
ADVERTISEMENT
Jan 6, 2013
Today I downloaded a trial version of PSE. This means of course that I'm new to the game. I can follow a step-by-step guide though. Here's what I'd like to do: I've taken a dozen photos of an actor with a green screen as a background. Is there a way that I can chroma-key out the green and put in another color, like gray or perhaps a textured off-white?
View 3 Replies
View Related
Feb 22, 2014
I have just purchased this upgrade software having used XARA Xtreme4.0 for many years.How can I change the black background screen with white writing to grey with black writing?
View 9 Replies
View Related
May 9, 2011
Unfortunately I am using ACAD 2000 so bear with me and the only ACAD training I have is a 3 day crash course at the local software reseller.
I am attempting to plot a drawing that was created from a template into a .pdf but it is plotting colored lines instead of black lines.
Here is some background info. My template is set up as a .dwt which I will save as a .dwg when I begin to make my drawings. Plot style table is “monochrome.stb” and I have selected Adobe .pdf as my plotter configuration. I then select the “Properties” then go to “Custom Properties”, “Paper/Quality” tab and then select “Black & White” as my color.
When I go to plot the drawing as a pdf and do a preview of what I am about to plot, I see that the lines that make up the drawing are a shade of gray in color. All my lineweights in the layers property manager are set to default. I have attached a blank drawing that is based off of my template.
View 1 Replies
View Related
Aug 18, 2013
How do I change the default toolbar background from dark gray to light gray in illustrator CS6? In the older versions, the toolbar backgrounds were light gray. It easier to read on light gray backgrounds. THe same question applies to Photoshop CS6. InDesign CS6 has light gray backgrounds.
View 1 Replies
View Related
Dec 21, 2012
Is it possible to change the light gray background colour to a darker gray background colour?
View 4 Replies
View Related
Dec 27, 2013
We are using Autocad 2014, we recently changed our dimension style fill color to background in lieu of none. This way when we are labeling components on our drawings our text would be to the front and the lines would be to the back. Before we would trim all lines around text which was tedious. We have lines merge on which is a must for our firm. When we plot or create pdf files, there are random gray dotted lines either to the left or left and top of the text where the background mask box is located (see attachment). It is not every dimension or multiline leader text. We plot to an Oce Plotwave 300 (printer driver ocegdi11.hdi). The lines are more faint on the plots than the pdf file, but are on both.
Also tried plotting a pdf file within autocad with the dwg to pdf.pc3 (printer driver pdfplot11.hdi) with lines merge on and it created the lines also. If I use the adobe pdf (printer driver gdiplot.hdi) it did not put the lines. Adobe pdf will not work for us because it is set to lines overwrite instead of lines merge. When I changed the adobe pdf to lines merge it created a filled color region behind my dimensions and masked text. I contacted AcroPlot which is the program we use to create pdf files and they said it is a bug in Autocad, but thought it was fixed in newer versions. I have tried changing the dimtfillclr to 255, but this did not work for us.
View 6 Replies
View Related
Apr 12, 2012
I just finished installing AutoCAD C3D 2013. And my drawings and designs were done on C3D 2011 AutoCAD, but the problem now is when i open my drawings with C3d 2013 all the text that has background in it shows black in a paper space but on model space is owk, is there a way of resolving this without goiung through all the text settings.
View 9 Replies
View Related
Mar 9, 2012
i have a simple block of text on a PS doc that is supposed to be black (i've checked many times and it's color =000000) but it looks gray on screen and prints gray. i checked opacity. it's 100%. i tried opening a new PS doc to see if somehow the doc itself was messed up, but i have the same problem in a brand new doc. make sure it wasn't a printer issue, i printed some text in MS Word and it got black just fine.
View 18 Replies
View Related
Sep 7, 2006
I have a TIFF file of a scanned microfilm page of a very old manuscript.
The background of the black fonts is gray, and it makes the reading of the text very hard.
My question is: is there a simple way to extract only the black fonts of the text, or otherwise to brighten up the background?
View 2 Replies
View Related
Apr 2, 2013
Lately when I plot my drawings the diagonal lines plot gray. I didn't change the line color. Can't figure it out.
View 1 Replies
View Related
Nov 22, 2011
I was just wondering if its possible to change toolbar background color to darker gray or any other color.
[URL]
View 9 Replies
View Related
Jul 20, 2009
In both Photoshop and Illustrator the gray colors look brown. However, in Fireworks and other programs the gray colors look gray. Any color management settings to fix this?
View 3 Replies
View Related
Jan 1, 2014
I have Photoshop Elements 8 and just recently it changed a bit. When on the active tab (any tab) the background outside my working space is completely black instead it's usual gray. I don't know how it happened but I would like it back to normal. I've attached my screenshot below.
View 2 Replies
View Related
Sep 22, 2009
is it possible to change the background color [outside the artboard] to a dark grey? because i really dont like having a big white screen while working in illustrator.when you normally work in illustrator, the artboard is indicated by a black border line but when you select the artboard editor tool, the background changes to dark grey, so it is possible and that is the effect im looking for, but then permanently.is it possible to do this via the preferences somewhere, or via a hack?
View 13 Replies
View Related
Apr 25, 2007
i havent used photoshop in a while but i whipped it out because i have a project to do, and well my gray is... like greenish, its retarded and it annoys the living hell out of me! Like if i save the file it comes out as a normal gray but within photoshop it is freaking greenish, its wierd, even if i import an image it comes in green! Ill show you a link of a couple things i think are odd,
View 4 Replies
View Related
Oct 16, 2012
I have this problem with my MText Background Mask. You can take a look at the two attachments. Each one gives me the same issue, but with different MText objects. I'm also plotting to a KIP5000 and a SHARP All in One, and I get similar results, except in some of the MText, they come out in a random color as well. The pc3's for all devices are set to Lines Merge.
The text is actually part of an xref file, and if I plot directly from the file they are in, I have no problem. I did a test where I copied the text into the sheet file, and got similar results when the text is in modelspace, and I got my intended results when the text is in paperspace. Now, this is the way I want to go...but the company standard is to draw it all in the xref, so I have to figure out how to get around this.
I've gone back and forth with the Merge/Overwrite options in the pc3, and when plotting to PDF and SHARP, I get the correct output with Overwrite, but the KIP just completely ignores the background mask with Overwrite.
View 4 Replies
View Related
Jun 7, 2011
I have another question about GREY images.
Example: CTRL+click on grey channel theoreticly (by my theory) make selection from white depending on its value. So cuting out must leave transparent greyscale image. But it don't (okey, it do, but changes black value):
The same selection inverted and filled with 100%K gives correct result: Is my "theory" about CTRL+click selection wrong? Becouse for my point of view, both ways should give same result.
View 9 Replies
View Related
Mar 24, 2003
Because of the problems with wipeouts, I have switched to using some solid hatch set to colour 255. The hatch is in paperspace, sitting under titleblock and other Layout text. I am plotting to an HP1050C, using a .ctb file with 255 set with grayscale off.
The plot preview is fine, but the hatch blocks come out black on paper. I thought this was the problem with wipeouts, and that hatch didn't suffer from it.
View 3 Replies
View Related
Feb 18, 2009
Acad2004, Acad2008MEP
Acrobat Pro 6.0 and 8.0 -and- CutePDF Writer
Merge Lines in PC3 'Device and Document Settings Tab' does not work when creating PDF's - but the same CTB works fine if I print to (2) different plotters and (3) different printers. We use gray for backgrounds and use black thicker lines for detail work. For many years we have had to make sure to send the backgrounds (gray colors) to the back (draworder) before plotting. It is not practical to do this every time we plot. I'm willing to use another program to create PDF's but I haven't found one that works.
View 9 Replies
View Related
Feb 7, 2013
Whenever I try to paste into my layer mask, the pasted image loses its color and turns gray. How can I keep the color when pasting?
Both files are RGB mode. I can paste the image into the image (but not the mask) and it will maintain its color.
View 5 Replies
View Related
Oct 30, 2012
Why does a black through white gradient created in an RGB document have a B channel that differs from the R and G channels?
In 8-bit mode, only some of the "grays" have a mismatching B value and there seems to be more of them when the gradient is created by Gradient Tool than when it is a Gradient Fill layer. The difference seems to be 1 in the cases that I've seen.
In 16-bit mode, I see the B differ from R and G by 7 at black, gradually reducing to 0 at white.
Before someone says, "Why make a fuss about small discrepancies?", I'm asking why there is any difference at all.
View 10 Replies
View Related
Jun 14, 2013
I have a 3D drawing of a phone, and there seems to be a reflection or glare covering it and it is really annoying.
The screen portion is supposed to be white, as well as the buttons. The border of the black section is gray, as is the edge of the phone.
View 2 Replies
View Related
Apr 13, 2013
I have used the same basic skin retouching method for hundreds of pictures. Usually I end up with very nice, natural looking skin. Today, the same technique is turning the skin gray on any picture I attempt to use it on. I cannot figure out why. Essentially, I copy the background layer. I do my spot healing on this layer.
When I'm through, I make 3 more layers. On the first, I use the Median filter. On the second, I use a high pass filter. Then on the 3rd, I add I layer mask, painting in black, and go over the skin. It is always gray on the mask. I then go back and reduce the opacity of the high pass and median layers. Usually I end up with smoother, but natural skin and it's normal color. Today, every time I attempt to do this, the skin stays a muted gray. I cannot figure out why. what might be different that I'm not noticing?
View 1 Replies
View Related
Aug 3, 2013
how to add black to the RGB, because i can only get a pure hue when mix all these three sliders(RGB). How to get Tint, Shade&Tone (Gray) when creating a palette wit rgb?
View 2 Replies
View Related
Oct 12, 2012
i am doing a presentation, but don't want the gray background. how do i change the color?
View 4 Replies
View Related
Oct 14, 2009
Group, I just got CS4 and I am working in RGB and when I hit D to set default colors the black is not black... It is a dark grey. Basically the same if you take something that is black in a CMYK document and paste it into an RGB document. The black becomes gray. Can't figure out what color setting to change to set blacks as "Rich Black." Under Edit - Preferences - Appearance of black, it is set to Rich Black.
View 8 Replies
View Related
Feb 11, 2014
what would be the CMYK value for "70% Gray of 100% Registration Black." A teacher from school has asked me to print the type for a poster in that color, expressing it that way, and I'm not sure what he means. From my understanding, 100% Registration Black is C: 100, M: 100, Y: 100, K: 100. So how would the 70% change that?
In case you need some frame of reference, I'm working on a poster for a class that has to be printed in a particular way for a Photolithography class. I'll be making two files, each of which will have the info for one of the two colors in the poster. Those files will then be made into films which will be printed.
View 5 Replies
View Related
Apr 25, 2008
Try plotting to a PC3 format with Line Merged option on under the properties for the plotter. Note how the contours continue through the text.
Try plotting with Lines Overwrite. Note how the contours don't go through text.
Any users out there saying they cannot use the "Lines Overwrite" option and need something else so they can still use the Lines Merged option and have their contour text looking good. How to get this in a SP or HF soon. Otherwise it may be deferred to 2010 and so on and so forth.
View 9 Replies
View Related
Apr 10, 2013
Have a windows 8 computer. Loaded CS6 and launched photoshop and it worked fine. About a week later when opening, it just opens to like a gray screen. Uninstalled CS6 and reloaded. Same thing.
View 1 Replies
View Related
Jul 1, 2012
JPEG's are opening in CS6 (32 and 64) with a partial gray/white mask in place. Resizing usually makes them disappear but they shouldn't be there to begin with. OS is Win7. The files display fine in Bridge and other applications.
View 10 Replies
View Related
