Photoshop :: Flood Fill Then Lose Boundary Line
May 12, 2009
I have a scan of a pencil sketch as my background image. What I want to do is convert to colour image then, eventually, lose the pencil lines. For starters I would like to know how to flood fill an area with colour then get rid of the area's boundary line. I guess a valid solution might be along one of the following lines:
1. Flood fill, depositing the colour in one layer but using a boundary line in a different one.
2. Copy the sketch to another layer, fill the areas then somehow delete the lines.
3. Flood fill in one layer then copy the block of colour only, not the surrounding line, and paste into another layer. Any suggestions? As of a week ago I'd never used Photoshop so don't assume I know anything.
View 4 Replies
ADVERTISEMENT
Jun 22, 2013
I have problem with corridor surface boundary , in curve boundary line is jumping on daylight fill , but i have created surface on wearing layer ,also when i am adding boundary there is only 3 types of adding , corridor extends , polygon and interactively , photo attached.
I am using Civil 3D 2014
View 4 Replies
View Related
Aug 17, 2011
I need to update many files using a flood fill with the following settings:
Flood color = white
Flood mode = global
Fill = solid color
Tolerance = 50%
Is it possible to create a macro or otherwise process these files in a batch, rather than editing them one-by-one?
View 3 Replies
View Related
Jun 9, 2013
When I want to flood fill -say a cloudy sky with blue, is it possible to use my own colour-that is an image taken of a blue sky instead of using one of the options shown after clicking to get the default colour choices in PSPro X
View 11 Replies
View Related
May 13, 2013
I am new to the site so not sure if this has been asked yet.
How do you do a flood fill with a transparent background, I can see how i can flood fill with colors and all that fun stuff, but for the life of me i cant find a selection for transparent.
paintshop pro x5 ultimate
View 2 Replies
View Related
Nov 30, 2013
I have an image with a gray foreground and want to change the colour. With the flood fill tool selected I click on the foreground colour box in the materials palette.I click on the colour frame, the colour momentarily shows but does not alter the colour box.Clicking on the rainbow tab displays a box with black to white gradient in it.This will change the colour box to any shade clicked on.Clicking on the swatches colour tab gives varying shades in the colour box or does not change the colour box.What is going on here and how do I get back to normal so that I can change the foreground colour as before? PSPro X
View 6 Replies
View Related
Feb 21, 2012
In PSPx2 I used to select an area in an adjustment layer and then use the Flood Fill tool to create a mask. Did it quite often.
In PSPx4 the Flood Fill tool doesn't seem to work on adjustment layers. I can get the desired effect using the Airbrush, but it's a tedious and imprecise technique. Is this a known bug (I searched the forum but couldn't find it) or an intentional change?
View 3 Replies
View Related
Mar 11, 2013
I have a detailed graph that is created in Excel that I want to paste into Illustrator so that I can save it as a high resolution TIFF file for submission to a journal.
In Excel the graph looks like this:
But when I select it (using Select Objects and then Copy OR Copy as picture) and paste it into Illustrator, it looks like this:
I have used different line formats in Excel for the different curves that are plotted and these obviously don't come through correctly when pasting into Illustrator. The lines are there but the scaling for the dashes or dots seems to be changed (increased). I'm good with Excel but a bit of an Illustrator newbie, why this is happening and can it be corrected.
I am on Win 7 64 bit system using Office 2010 and AI CS6
View 5 Replies
View Related
Dec 14, 2012
When I try to fill a figure using gradient i get: "Unable to fill the boundary with solid." But when I try to fill the figure using hatch I get it to work. The problem is I want to use gradient.
View 1 Replies
View Related
Nov 29, 2011
I often use gradient cylindrical fill to paint pipes, however if gradient has to fill wide boundry it gets distorted, i found the way of making a short block and scaling it, gradient fill is consistent. It's ok but i want to make a dynamic block out of it and i cant, also if i explode this block gradient fill problem reappears (see pic)
Basicly i want similar looking hatch but without problem.
View 6 Replies
View Related
Feb 17, 2013
I traced an image earlier, expanded it then wanted to change the line colour. For some reason I couldn't get this to work even though I've done it in the past. So, I used the magic wand to select the line then dragged it into my new document and changed the line colour.
Now, I want to change the fill on certain sections, however when I change the stroke it changes the colour of the line and when I change the fill it changes the color of the line.
View 4 Replies
View Related
Apr 27, 2010
I need to do it quickly with many text regions. How to make line boundary around multi-line text region corresponding to text mask?
View 9 Replies
View Related
May 24, 2011
When I have a group of objects selected and I go to create a boundary around the entire thing to use as a cut line, sometimes parts of the group are excluded. I made sure all of the objects were on the same layer and that everything was indeed selected, but nothing I do seems to make a difference.
View 2 Replies
View Related
Jun 25, 2012
I am using live paint to paint cartoon character illustrations. The artwork is brought into Illustrator CS3 and live traced. Then I convert it to a live paint group and use the paint bucket to fill. Everything looks fine no matter how much I zoom in. If I bring the AI file into Photoshop CS6 I can see a thin white line between the black line art and the fill. This is most noticeable where black meets black. I can also see this sometimes in file previews while browsing through files. If the white line cannot be seen in Illustrator is the file ok? I did just upgrade to CS6 if that would make a difference.
View 2 Replies
View Related
Jan 7, 2011
Is there a way to break the Callout Boundary similar to the Section Line in Revit Arch 2011 ?
View 9 Replies
View Related
Sep 11, 2006
Inventor 11 - Sp1
Why is the scale of my Detail Boundary line different than my Section Line scale? I have set the global line scale so that hidden and section lines look OK, but the detail boundary line spaces are so close that it prints as a continuous line. I am using the same line weight and line type for both detail and section lines.
View 5 Replies
View Related
Nov 9, 2012
i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
View 9 Replies
View Related
Sep 20, 2013
How to install the Flaming Pear Flood plug in to PS CC?
View 3 Replies
View Related
Oct 19, 2013
How do I draw a rectangle or ellipse as a line without fill in Photoshop Elements?
View 4 Replies
View Related
Oct 24, 2012
I used a 2d polyline to create a surface boundary for a surface created. The polyline is a closed loop. For the boundary type it is outer, unchecked Non-destructive breakline, and mid-ordinate distance = 1.
My problem is that when I do this I only get a small portion of the surface to show up within my surface boundary. If I don't have a surface boundary the entire drawing surface shows up no problem.
The purple polyline is my boundary and the light blue is the surface created within the boundary.
View 3 Replies
View Related
May 17, 2013
when I select a swatch for an object the default was to apply it to the fill color. I don't know why but it started applying a swatch when selected to the outline/stroke instead. How can I change the default application of swatches back to the fill color?
View 4 Replies
View Related
Feb 16, 2014
How can I draw a continuous stroked line with a fill, so that it overlaps and covers the previously drawn part of the line? I'm trying to draw some text so that it has an effect like in fig. 2 of the attached picture, not fig. 1. Is it possible to make somehow? For a simple image like this I could of course manually remove the few lines, but for a more complex text it's not possible, and I can't seem to find a solution myself.
View 7 Replies
View Related
Jun 18, 2013
I started with a tif image that's a black & white drawing and used the fill tool to fill in some black areas that were supposed to be solid, but weren't. I also did a lot of cutting to get rid of specks on the image. It looked fine when I closed and saved it, but when I went to convert it to a PDF, all my tif's have a black background and white lettering--should be just the opposite. I have gone into the images and they all look that way (apart from the PDF). I'm guessing this is a layer issue, but I'm new to this program and can't figure out what I did wrong and how to fix it. I really don't want to start over. So, to restate, everything that should be black is white and all that should be white is black.
View 2 Replies
View Related
Dec 4, 2013
I am working on a flood inundation, I would like to find a lisp or command(i'm not finding) to connect two points with a given elevation following the surface file or surface entities.
here is a small section as example right now it's just guesswork, some of these have taken a week to connect all the sections.
View 2 Replies
View Related
Jul 5, 2012
I draw electrical wiring diagrams and are used to working with Micrografx Designer 9.0. I have now got a new computer and wanted to upgrade to Corel Designer.
Since i draw wiring diagrams i often have to draw wires with two colors. In MD9.0 you could draw a simple line and the use hatch filling to add two different colors to the line and still be able to move the points on the line around. (in my case for routing of the wires and the components) I can not figure out how to solve this in Corel Designer. Am I missing something or is this function removed?
View 10 Replies
View Related
Jun 5, 2012
I create some curves with freehand or 3point curve or else (image on the left). Then I use the artistic media docker to convert it to artistic media. But the artistic media fill is empty.
So I right click on black to fill it, but it fill between the first and last node (image right). Weird.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 1 Replies
View Related
Mar 12, 2011
Until recently, CorelDraw X3 was working just fine. Now however, whenever I change an object's line or fill attributes, CorelDraw automatically sets those as the new defaults, overriding the defaults I had previously set. Clicking on a a color in the palette with nothing selected no longer invokes the defaults dialogue box.
I've looked through the various options dialogues in case I had inadvertently checked a box I shouldn't have, but I can't find anything. I've been using Draw since version 2, so I'm pretty familiar with it. I've never encountered this behavior before. I've had X3 installed for about 3 years or so.
I'm running CorelGraphics X3 SP2 in Vista, 2GB RAM, Nvidia graphics.
View 4 Replies
View Related
Dec 4, 2011
how to draw and big fat line - about 24 pt - with rounded ends, then give that line an outline of its own so I can change the 'fill ' - the original line colour - and get an outlined line?
And just for fun, I want the 'fill' to be semi-transparent!
View 6 Replies
View Related
Aug 21, 2011
I'm going to mount double flood lights with a motion sensor at each corner of the house, it will mount on a junction box in the soffit. This would sure save me some time, I searched the web but so far I'm not finding any blocks at all to do this.
View 4 Replies
View Related
Jul 29, 2013
Win 7 64 bit
How can I use the bucket-fill option to fill an area surrounded by a dottedline?
The dotted line is a path; so if I use a line for the dots, the bucket-fillworks.
But how can I step back after filling to change the path's line into dotsagain?
View 3 Replies
View Related
Feb 16, 2012
I have a custom world map for my fantasy series created in Photoshop CS5 (in 2D) that I want to turn into a globe. The image size is 14,400 x 7200 pixels. When I convert the image to a 3D shape, (New Shape From Layer -> Sphere) the resulting 3D image loses so much resolution, that when I view it at actual pixels, I can barely even read any of the text. Everything is extremely blurry. Is there a way to fix this or is it simply a process of converting the image from a 2D object to a 3D object?
View 2 Replies
View Related
