I often use gradient cylindrical fill to paint pipes, however if gradient has to fill wide boundry it gets distorted, i found the way of making a short block and scaling it, gradient fill is consistent. It's ok but i want to make a dynamic block out of it and i cant, also if i explode this block gradient fill problem reappears (see pic)
Basicly i want similar looking hatch but without problem.
When I try to fill a figure using gradient i get: "Unable to fill the boundary with solid." But when I try to fill the figure using hatch I get it to work. The problem is I want to use gradient.
View 1 Replies View RelatedI want to create a gradient fill, top to bottom of some text.To do this, I'm creating my text in a solid colour (can't seem to find a gradient fill on the text tool), then wand selecting the background inverting the selection then applying a gradient.
Unfortunately, applying the fill seems to make the text lose all smoothness (anti-aliasing?).I've tried feathering (using Boltbait) but even at 1 it's too aggressive and the text ends up too skinny.
How to maintain the anti-aliasing but also have a gradient.
i would like to set a gradient in a form(exactly a text) from the stroke color to the fill color.
View 6 Replies View RelatedI have problem with corridor surface boundary , in curve boundary line is jumping on daylight fill , but i have created surface on wearing layer ,also when i am adding boundary there is only 3 types of adding , corridor extends , polygon and interactively , photo attached.
I am using Civil 3D 2014
I have a scan of a pencil sketch as my background image. What I want to do is convert to colour image then, eventually, lose the pencil lines. For starters I would like to know how to flood fill an area with colour then get rid of the area's boundary line. I guess a valid solution might be along one of the following lines:
1. Flood fill, depositing the colour in one layer but using a boundary line in a different one.
2. Copy the sketch to another layer, fill the areas then somehow delete the lines.
3. Flood fill in one layer then copy the block of colour only, not the surrounding line, and paste into another layer. Any suggestions? As of a week ago I'd never used Photoshop so don't assume I know anything.
Using Acad LT 2014, is there a way to adjust the scale of a gradient hatch?
Like the distance between one gradient and the next?I see several property adjustments I can make, but not the scale of the gradient.
i need to know if there is any way to control the points in the point cloud.
1. either only import the point cloud in a polyline area i specify
2. add all the points within a boundary not limited to the pointclouddensity = 100, freaking default is 15 almost cost my job today. extremely stressed out right now.
i am talking about extreme lidar surveys. 1km 1km LAS/0.5m contours/xyz files times 355 of them. covers a 2km wide corridor. but i only need 100m wide after i define the road alignment. no need to have all the extra points.
right now i densify the heck out of it and end up like 5-12m points. decent but not good enough because the geotech is bitching about that accuracy is not good for some feasibility study. or is there any software i can do this besides civil 3d.
what i want can also do is automate the 'add points to surface" under point cloud and have the software do multiple boundaries without having me baby it over the night. right now every click is 5 minutes and adds like 400k to 1 million points. Civil 3D 2012
In Corel PhotoPaint X5, changing the fill color was possible by e.g. double clicking the (left-most) color square, then hitting Edit. Already, I found this was a bit too many clicks. Now in Corel PhotoPaint X6 it's gotten worse -- after hitting Edit, I'm not in the left-most tab "Models", but in the right tab "Palettes"!
My question: Is there any way I can open the Uniform Fill dialog with one click? (The Color Docker doesn't have a big color preview field so it doesn't work well for me when selecting and changing a color.) And is there any chance Corel will fix the bug with the wrong tab being opened?
I am trying to make a rounded corner frame, sides about an inch wide, with a black gradient fill that fades onto the inner edges of the frame. This may be a bit hard to visualize, but I can post an example, if someone will tell me how to post photos.
I can do the frame with rounded corners; just can't get the gradient to fade out onto all sides of the frame. Gradients have always given me trouble.
I am beginner of photoshop. I would like to ask how to create the effect such a ball with gradient fill. There is a shiny glow on the left of the top. It relate with the water droplet tutorial in this web site?
View 4 Replies View RelatedI've drawn two rectangles - both on different layers. One of the rectangle is havign solid colour and the other a gradient fill. When i give the gradient fill to the other rectangle the fill spills over to the whole working area. I tried locking the other layers but no use.
View 1 Replies View RelatedI've made an abstract background using a gradient fill on the background and some ellipse selections also filled with overlay gradients. This image has been saved as .xcf before closing down Gimp. When I reopen the image, I don't see any way to remove the gradient fill so that I'm just left with the selection.
Ultimately, I want to change the gradient colors .
In Illustrator CS4:
I need to fill 20 circles with one common grad fill... so that the 1st circle is dark to the 20th as lightest (NOT each individual circle getting it's own gradient).
Let's say I have a square with a gradient fill of 30% gray to white. I have a background that I have imported to make the paper look old and weathered. If I place this background behind the gradient filled square, the square looks grayish and will print this way. Instead what I want is for the gradient filled square to show the color of the background rather than gray.
If I print the old and weathered background first and then run the paper through the printer again with the gradient filled square, it has the effect I want. Is there a way to do get this effect without having to print the background first and then print it again?
Even starting with a clean slate 400x400 white background, my gradient tool wont fill! The fill bucket works fine, not the gradient. I've selected 5 or so different shades, everything, no luck. I'm in Normal blend mode, 100% opacity etc. I dont see why I cant apply a gradient! Dont know if this will help but when mousing over with the gradient tool, the cursor turns into a small "+" for some reason.....
View 6 Replies View RelatedI've got an object that I've filled with a circular fill/gradient. Is there a button that allows me to swap the start color and end colors in one click? If this was a linear gradient I could just position the start and end points to reverse it but since its circular I must swap the start and end to retain the circular effect.
View 6 Replies View Relateda photo in xara is actually a bitmap filled shape, so if you just try applying another fill, eg linear, it will replace the bitmap completely
so what you need to do is draw a rectangle over the photo - apply the fill you want to the rectangle - and then give it a transparency of type hue
now come the reservations - hue transparency has no affect on black/white/grey-tones, so you may not end up with an even fill as you can see from the example
you may wish to contone the bitmap first... the underlying color will still affect the fill to some extent... as can be seen from the green band in the examples..
the chosen fill ramp gives a rather nice effect on the original I think, but is a bit extreme on the contones...
[I find it useful for adding gradient color to raster line art, sometimes quicker than going into a bitmap editor and painting on color whilst preserving transparency...]
Illy CS5, Windows 7 x64
My gradient fill tool controls, that normally appear over the selected gradient-filled shape, are no longer showing up.
Is there any way to apply a gradient like this...
to the wavy "lines" in a shape like this...
The shape is a compound path with a black fill & no stroke. Alternatively, is there any way to convert that shape to individual horizontal & vertical wavy lines?
Can you fill individual characters each with a gradient, I get black when I try(the black type with one letter selected). When I create outlines from the type I get what I need(Crushed with radial gradient in each letter). I would like to keep this editable type.
View 12 Replies View RelatedI don't like the radius of the gradient fill of my shape layer in Photoshop. I cannot find any hints about how to expand the gradient fill to cover a different area inside of the shape layer.
How can I transform gradient fills of vectors shapes in PS?
Say i have filled an area with Gradient fill and i open up the Gradient editor to refine the gradient, i realize that i cannot 'live' preview how the tuning affects the gradient in the object.
This can be achieve in Illustrator CS2 from gradient palette. i was wondering can it be done in Photoshop Cs2 with any shortcut or so?
(i was thinking any other way to achieve that without using Gradient overlay , Layer style? because i want to create several objects with differnt Gradients on the same layer)
Else, are there any external plugin/script to achive that?
---
Secondly, is there any command to align anchor points in PS? like align them vertically or something, i notice there is no paths palette in Ps( where are the commands to manage anchor points located at)?
I know Xara provides a range a built in gradient fills (e.g. linear, spherical etc), but does it have the ability to have a gradient follow the edge of an object?
View 9 Replies View RelatedThese gradients in gimp are really hard to figure out (not saying other things seem easy to me), however I'm sure if one knows what to do, they can solve many problems.
I had that screenshot of a text list:
And I wanted to make it fade away from the highlighted line:
However, with the blend tool, this is actually impossible or really really hard, because I can't aim it so preciselly.
I have button drawing for web in Adobe Illustrator format. I'm trying to get fill settings to create the same look with CSS. I can't find what color to use and gradient settings.
View 1 Replies View RelatedI am working with scripting in Ai, fill gradient color in TextFrame. I search in this forum but the other topics fill color to path or line. For now, I can make a gradient color, but I don't know how to apply it to textframe.
View 6 Replies View Relatedhelp_gdg_1.cdr
I need to make the gradient fill look just like the original. I already created the vector (attached)
(Next to the blue arrow it is actually a green gradient.)
How to get that blue & white fill to follow that "S". I've tried to go by the article but am lost. I've used Corel Draw since version 8 but have not gotten in as deep as I need to get. That "S" fill by Sally is awesome!.
Windows 7 64 bit, Intel Xeon 3.30GHz, 32GB memory, ATI FirePro V4800, (1)10,000 Velosirapptor internal HD, (1) internal 1TB HD, (1) 500GB external HD (2) external 3TB HDs, (2) HP z6200 printers, (1) OKI 9650 printer (1) Roland Camm1 Pro vinyl cutter
blend.cdr
I have an arc shape that I'm trying to fill with a gradient-type blend where it will be 0% spot on the lower left side gradually going around to 100% spot on the lower right side. The example I have attached shows the shape on the left with a conical fountain just to give an idea of something close, but it won't actually work for my shape. I also attached a cdr X5 file which contains a blend I was working on, but can't seem to get it to work (that is the shape on the right). I tried cutting it in half which works, but I still can't get it.
I'm having problems getting what I want on Illustrator CS6. This is the shape that I'm working on: [URL]
I got two paths, one for the inner outline, one for the outer. I want this to be one object, looking just like that, where red is the fill, and black is the outline. Simple as that. [URL] - this is what i want.
So, the inner "circle" is not filled with anything, beacause my object is this "frame" outside. But since I have two seperate paths, I'm filling the outer path with colour, and I get:
[URL] the outer filling is red, the outside is transparent, which is good, but the inside is red because the inner path has no filling.
Right, so next I fill the inner path with white and it looks almost good: [URL]
But the inside is not transparent, it's an "illusion" and everything will be great on a white background, but that's not the case.
I want to convert these to paths into one object to behave exactly like I showed in the first image. Red is the fill, black is the outline. And I plan to use gradient mesh heavily on that shape, so that has to work to.
Bad quality, just doing some quick previews on Photoshop.