CorelDRAW Graphics Suite X5 :: Changing Guidelines Colour And Green Processing Fill

Apr 4, 2012

I recently switched to coreldraw x5. is there a way to change default guidelines color. and this setting should remain forever.  

one more thing i want the green processing filling, which is now present in the background tasks to be visible. ...just like in older versions how can i do it?

Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM

View 12 Replies


ADVERTISEMENT

CorelDRAW Graphics Suite 12 :: Colour Fill Under A Curve

Feb 23, 2012

I have created a curved line across my page using the Bezier tool. I need to fill the page below my curve to make it blue (and above the curve to stay white).

View 8 Replies View Related

CorelDRAW Graphics Suite X5 :: Object Properties - Colour Fill

Mar 15, 2013

My corel x5 opens with object properties are set with   x  no fill and on opening a new document and creating a shape, it has no fill.

My boss opens corel x5 and his object properties are set with   x no fill but on opening a new document his properties change and a blue color shows in his fill, and of course when he creates a shape it is filled  with this blue color.

Yes, he can just change the properties to  x no fill  each time he opens a new document but i wondered if we can change it and have it set at  x no fill as the default ?   I have tried everything I can think of but it seems to want to keep this blue color as the default.

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: Mesh Fill To Bitmap Colour Shift?

May 2, 2012

Mesh Fill.cdr

In X5 when converting a cmyk meshfill to cmyk bitmap there is often an unacceptable shift in colour.

The only workaround I have found to maintain cmyk values is to export mesh fill as pdf and then save as bitmap in Acrobat.

Does same behaviour occurs in X6? Sample file attached.

AdobeRGB

US Web Coated SWOP v2

View 9 Replies View Related

CorelDRAW Graphics Suite X5 :: Changing Fill Of Many Objects?

Oct 3, 2011

Im working with an image (pictured below) and I want to make all of the white bits clear, so as to allow whatever colour is behind to show through.

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: Changing Colour Of Scanned Object?

Jun 3, 2012

When i scan an object i cannot alter the colour when using X5.

View 3 Replies View Related

CorelDRAW Graphics Suite X3 :: Changing Default Line / Fill Attributes

Mar 12, 2011

Until recently, CorelDraw X3 was working just fine. Now however, whenever I change an object's line or fill attributes, CorelDraw automatically sets those as the new defaults, overriding the defaults I had previously set. Clicking on a a color in the palette with nothing selected no longer invokes the defaults dialogue box.

I've looked through the various options dialogues in case I had inadvertently checked a box I shouldn't have, but I can't find anything. I've been using Draw since version 2, so I'm pretty familiar with it. I've never encountered this behavior before. I've had X3 installed for about 3 years or so.

I'm running CorelGraphics X3 SP2 in Vista, 2GB RAM, Nvidia graphics.

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: Changing Fill Color Doesn't Work

Aug 19, 2013

I dobbleclick on fill-color icon in lower right side of the screen to change the fill-color. But no dialog-box appear. But if I try to click anywhere in Corel after this I just get a beep. Looks like there is a dialog-box outside screen or something.

View 4 Replies View Related

CorelDRAW X5 :: Colour Changing - Batch Processing

Oct 4, 2012

I have found macro's to change specific RGB values to different specific values within a Corel file. I have not been successful in finding a solution on applying the same sort of change across multiple files. i.e. All Corel files within a folder will search for specific RGB's that I`ve told it to change to other specific RGB's.

I know that Corel has a macro that accomplishes a batch process where it will convert files to different file types.

View 1 Replies View Related

CorelDRAW Graphics Suite X6 :: X6.2 - Rotation Of Guidelines

Dec 10, 2012

Place a guideline on the page.- In the property bar, in the field Angle of Rotation,for example you can put 15 degrees or something else.What's happening?

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Status Bar Shows Processing

Jul 19, 2012

I don't know why it happens but whenever I start Corel it starts fine but after a while the color information disappears and says "Processing" until I restart it. I have uninstalled, F8, latest updates, the whole bit. I work in the sign business so I must be crazy.

View 7 Replies View Related

CorelDRAW Graphics Suite X4 :: Colors Especially Blue And Green Always Looks So Dark?

Aug 29, 2012

i always use corel for designing an advertorial matter, but there's always something that bothering me when i get the print results.. why does the colors especially blue and green always looks so dark, infact,  they became brown and purple..

View 1 Replies View Related

CorelDRAW Graphics Suite X4 :: Won't Open New Or Old Document - Processing / Not Responding

Nov 6, 2011

So, I've had CorelDraw X4 for maybe two years now. Everything has always worked fine. 

Now, I can't get it to open new documents, and when it says it's "processing" to open old documents.. It doesn't really make any progress, and nothing every opens.

Then it will say that corel is not responding ...

View 4 Replies View Related

CorelDRAW Graphics Suite X4 :: Drop Shadow On Green Background Comes Out As Reddish Color

Sep 13, 2011

I have created a drop shadow on a green background.

Shadow Black value being C - 0   M - 0   Y - 0   K -100.

In the file and the hard print the shadow comes out as a reddish color. How do I get the shadow Black?

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Two Colour Stroke

Apr 3, 2011

Do you know if it is possible to use two or more colors with the artistic media brush without having to use the mesh fill .

in CorelDraw X5 .

View 2 Replies View Related

CorelDRAW Graphics Suite X6 :: Can't Colour Bullets

Apr 12, 2012

A lot of the time I like bullets to be a different colour to their following text. In past versions you could highlight the bullet and pick a colour from the palette. You had to do it with each individual bullet which was a pain, but it could be done. Now if you highlight a bullet and then click a colour, nothing happens. I was hoping that this might be because they'd added a function to choose bullet colour elsewhere (such as in the Bullets window), but apparently not.

View 11 Replies View Related

CorelDRAW Graphics Suite X5 :: Unable To Use The Fill?

Apr 12, 2011

I have followed the instructions carefully and am unable to fill anything.

I make a rectangle. Choose the colour from the palette, drag the little coloured box over to the rectangle and release. Nothing. Many years ago I used my brothers Corel draw, so I know ( or knew then ) how to colour a rectangle.

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: Colour Management In PCL Printing?

Oct 3, 2013

We are just in the process of setting up Corel X6 for deployment in our office and we are trying to get a handle on the colour settings. We have upgraded from CD11 which  had very little in the way of colour management and so we are somewhat inexperienced in how to set up.

We have two production printers an OKI 821 and a Ricoh C820DN which we print to using PCL drivers. We believe that we therefore need to use RGB as our colour mode and use an ICC profile for each printer for colour correction with colour management switched off on the driver. Is this correct? We've had a try this afternoon and the colours on the prints differ greatly from the display (which has been profiled using an xrite i1pro calibrator). They also differ from each other.

The monitor profile is set as the device profile in the windows colour system, and we are using that as our engine in corel.

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Transferring Colour Pallet From X3?

Apr 26, 2011

Is it possible to transfer a colour pallet from X3 to X5?

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Colour Profiles And Exporting

Jun 16, 2011

Problem: I've upgraded from Corel x3 to Corel x5 and when I am exporting .eps files  in x5 I am getting different colors to that in x3, I have changed my color management, changed the levels of export yet I cannot get the colors right.

View 6 Replies View Related

CorelDRAW Graphics Suite X5 :: Proof Colour Switch On / Off?

Nov 18, 2011

I have just discovered the proof on /off switch in the bottom right hand corner in Draw. What is this for? I notice the colurs change when I switch it on or  off. I work with RGB and produce digital images for people to print out on their home printers to use in paper crafting. Should I have this switched on or off? I notice colours are slightly different when I print my designs off myself to what they are on screen. Is this an important feature or not. I only have a liminted basic understanding of the software and have only recently began colouring my images so don't know much about 'Colour' at all.

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Fill Circle With Letters

Sep 22, 2011

I want to fill in a circle with letters, not a paragraph of text, but where the few letters fill into the circle space. I 'm using CorelDRAW GSX5

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Drawing With Mesh Fill?

Aug 22, 2011

Never did anything with mesh fill till today. Did some reading on it here over the past few days and did a drawing using only mesh fills, 1 for subject and 1 for background. I spent about 2 hours on it. I'm calling it "Lumpy-Bottle"

Is there a good way to assign grid node coordinates, other then free hand(I couldn't find a display for node coordinates) . Could you use a cad program, that displays a numeric coordinate for nodes to do the bulk of the grid work and tune it up or add different elements to cad drawing or use cad to do this type of drawing. I have a copy of "Turbo Cad" I have not used yet and was wondering how the different programs compared? I was trying to use the drawing grid guide, but the mesh fill grid lays on top of it and is opaque and and I couldn't use it well inside the mesh fill. I guess I could draw a transparent grid guide and lay it on top of the mesh fill, in a separate layer and lock it down

Is there some kind of guide or document  on color placement and the relationship to grid line spacing, node placement and node handle angle and length.

View 4 Replies View Related

CorelDRAW Graphics Suite X5 :: Selecting Object That Has No Fill?

Oct 11, 2012

I just upgraded to X5 the other day and started working with it. All seemed pretty normal until I drew a rectangle with a hairline and no fill. I typed in some text and went to click off of it to start a separate line of text only to find out when clicking inside this shape, and any other shape I made, it would select the shape.

View 8 Replies View Related

CorelDRAW Graphics Suite X5 :: How To Cut A Background To Use As Text Fill

Nov 10, 2013

I have text with a transparent fill (layer 1).  Underneath it I've placed a colourful background image that I'd like to keep as the text fill (layer 2).  How do I cut away the rest of the background that's showing outside the text

View 3 Replies View Related

CorelDRAW Graphics Suite X6 :: Fill Shape With Other Shapes

Apr 4, 2012

I'm trying to find the best way to fill a shape with other shapes( a with a specific size), without overlaping, like the example below.

My main concerns are the spacing between the circles, the positioning should be as paralel to the the outside shapes as possible, and the size of the circles ( or any other necessary shape).

I'm doing this by hand sometimes with 900 circles. is there a fast way to this? do you know any macro/plugin to make the task easier?

View 6 Replies View Related

CorelDRAW Graphics Suite X6 :: Texture Fill And Printing

Jan 15, 2013

Texture fill and a printing problem.  They may be related. First, the file I am working with was originally created in Corel 10.  I'm using X6 in Windows 8.

It is a map. I have several layers but the two layers I am having trouble with are the continental shelf and the land layers.

I cannot texture fill either in X6.  I go through all the steps but the fill will not show on the screen nor will it print.  I can fountain fill, solid fill etc .these layers and they will print as filled.  This is the same for both printers I have, which are also new with 128MB of memory each.

In addition, I can get a fountain fill to print on the continental shelf layer, but cannot get a fountain fill to print on the land layer; even though the fill shows on the screen.   I can get a solid fill to print on the  land layer.

I've the objects in the proper order, the print is turned on for all these layers, etc. 

View 6 Replies View Related

CorelDRAW Graphics Suite X6 :: Mesh Fill On Text?

Sep 21, 2013

I have discovered the Mesh Fill tool. I am having a lot fun playing around with it but can't seem to apply it to text.I have converted the text to curves but it just acts as a fill.  Is there a way to use the Mesh Fill on Text? 

View 8 Replies View Related

CorelDRAW Graphics Suite X6 :: Fountain Fill Shape

Jun 4, 2012

fountainfill_resize.gif

I know there is not a way to change shape of founrain fill directly. But is there any other way for make this? Attached gif video from Adobe Illustrator Gradient Tool.

View 14 Replies View Related

CorelDRAW Graphics Suite X5 :: How To Fill Letters With A Pattern

Apr 28, 2012

I want to make some letters and fill them with a background pattern like rainbow.

all the fonts are solid black so I need to know how to hollow them out so the background fill will show, then have to cut out all the letters to get the background around them removed so I have only the letters filled with rainbow that can then be moved around and overlaid like with the gray checkerboard squares thing happening.

Like this: imagine a rainbow backing picture with " I heart Mom" text overlaid, fill the " I heart Mom" with rainbow then get rid of the rest of the rainbow backing that is OUTSIDE the letters.  The word heart will be replaced with a heart shape.

View 6 Replies View Related

CorelDRAW Graphics Suite 11 :: How To Fill Pattern In Particular Region

Nov 25, 2013

I would like to create a diagram like below and want to fill pattern similar to this.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved