Illustrator :: Colour Sections Of 1 Stroke Differently And Also Change Width
Sep 13, 2013
So i have this piece and i need to be able to colour different sections of the stroke around the whole piece with different colours. Also, i need to be able to change the width uniformly on sections between anchor points. I DO NOT want to use live paint as it takes away the sections of stroke i have tapered off already, however, the effect you get when using the live paint selection tool is exactly what i need
Is there a way of doing this at all?? It seems that i should be able to do it but i'm not able to find the right button, option or combination of both.......
I'm having trouble with stroke option in illustrator. It was working just fine but now its stuck at 1pt and I cant increase or decrease the stroke width no matter what I do.
Im working on an object which has 4 anchor points, i would like to keep to black stroke for 2/3 segments of the object but i would like to change the colour between two anchor points (so 1/3 segments).
Trying to use the width tool, I ran into the following problem. I would like to have a smooth transition of the stroke width between two width points while keeping the original stroke width unchanged outside of that line segment.
There are four width points here: two end points and two in between. The original stroke width is 200. The two on the left have one side set to 100 while the two on the right have one side set to 50. I would like to eliminate the distortion of the line width occuring in the first and third line segments. The only solution that I have come up with so far is to place two additional width points very close to the two middle width points: one with a 100-unit side to the left of the second point in the picture and one with a 50-unit side to the right of the third point in the picture. Yet there will be a small distirtion in between.
copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
I do cartoons and I want to be able to use the pen tool, brush tool and/or even blob brush tool to draw. I'm trying to draw a straight line that has a varied stroke width, so it looks like it's drawn with a felt tip marker or maybe a pencil. The natural random/varied stroke width is what I'm looking for.
I see the "vaiable width profile" drop down box in the tool bar but I only see one option that looks like this (it says "width profile 2" when I mouse over it). Although this varies in width, it's too consistent and doesn't look natural at all. Is there a way to get a varied stroke width for straight lines? I have a pen talet and have tried pen pressure as well but I've not found an easy way to do this.
I'm looking for an existing, or a way to create, a shortcut that will adjust the stoke width in Illustrator as I draw. Something similar to the bracket key in Photoshop for changing brush size on the fly.
I can't believe Illustrator doesn't do this automatically. If you create a stroke profile on one side of the stroke by holding Alt/ Option while dragging with the Width Tool and then mirror the object, the stroke profile doesn't mirror accordingly. You have to go to the Stroke panel and click one of the flipping buttons for each stroke of the mirrored artwork. This makes mirroring complex artwork very time consuming. Mirroring with transform effect doesn't have this problem but this makes the usage and editing of the mirrored object difficult.
I'm just posting this before making a feature request in case I'm missing something. And to check if this problem has been already raised and the feature request made.
I am tried to open the following svg in the illustrator but it was not scaled the stroke-width of the text, even I have changed the units into px. And its kinda merged svg from both illustrator and inkscape generated svgs.
<?xml version="1.0" encoding="UTF-8" standalone="no"?> <!-- Created with Inkscape (http://www.inkscape.org/) --> <!-- Added to solve the issuses with ill.adobe genrated svg's --> <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd" [ <!ENTITY ns_extend "http://ns.adobe.com/Extensibility/1.0/">
I am trying to create seamless pattern repeats. Most of the time when I do this I get thin lines between the tiles (I place the original pattern and move>copy it to exact measurements). I have read in other forums that these are 'ghost' lines which don't appear when the design is printed out, but I've had fabric samples printed that do contain a line. Also sometimes the motifs on the edge of each tile don't match up - see the slight line down the orange / white cups here:
I move>copy the motifs using the exact measurements of the artboard, I line up my clipping mask with the artboard and they are exactly the same size, and they have no stroke width. I can't work out why it still does not work.
Even before I copy and tile the design I sometimes have a thin white line down one side - see below.
Am I the only one who has edited a stroke with the stroke width tool, then outlined the stroke only to find a countless number of points and noticeably unsmooth edges? Is there a setting or certain way to ensure that the stroke width tool won't corrupt the smoothness of my shapes? The stroke width tool is the most handy new feature I can imagine, but this problem makes it almost entirely useless, unless designing something where precision and smoothness are not important.
i have made a custom stroke width profile and want to back it up for future use i found two files called variablewidth or something but the date modified wasn't congruent to when i created the profile.
where can i find the files that contain this preset to back up?
In Illustrator CS6 and CC, when the stroke width tool is used on a curve, the curve is actually made up of a series of straight lines instead of smooth vector curves:
whereas in CS5 it looks perfect.These images may be too small to see the details, but the difference is there. Is there a workaround for this? Or is it recognized as a bug?
I have a big problem with Illustrator and it happens all the time. I have made a pattern and although it works fine I now have no colours in my swatches just the patterns and my line choices for strokes is now limited to one choice. If I open a new doc the default materials are back and line choices. It's obviously a preference somewhere but I haven't the foggiest idea where to find it. It's very frustrating because I can't reset to the defaults and I can't append colours to the swatches or append new strokes to the line choices.
How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
I created an action to change the width of an image. I execute the action using DoScript javascript method.
The first action Obj1 will select the whole image and second action Obj2 will open the transform panel and change the width of the image.
app.Open("D:LWW_Castoff45991_09_03.eps") app.DoScript("Obj1", "LWW") While (app.ActionIsRunning) Thread.Sleep(500)
[Code]...
In the above code, the second action 'Obj2' is not getting executed. Both the actions are getting executed individually. Let me know the problem and how to execute both the actions.
I'm having trouble with the spacing of my text when I import a .rtf file. The spaces change width based on the width of the columns. The problem does not effect all the paragraphs only select ones. If I change the width of the column the spacing of the text will fix itself. All of the text is the same text style. I have attached a copy for reference.
I traced with pen tool a line and now I need it to make it same as this:
I tried to double click to stroke lines to bring stroke options and there are few strokes in library but not exact of this. I tried to play with size and spacing but I cannot reach the same result, how to do it?
I am clicking on a line and altering it's stroke weight to numbers as big as 70pt, but the there is no visible change to the line! If I click off the line and back on it, it still says that it is 70pt, but this is not apparent! Have i clicked on something that prevents me from altering the line weights?
I've read several things in this forum but nothing convenient. In the past I though I was possible to change the stroke thickness with no document open and that worked for all the new documents yet to come. Well, it doesn't. The default stroke size is 1pt and I want it to change to f.e. 0,25pt. But how?
Why is it that when I apply a gradient to a stroke I cannot use the gradient tool to change the direction or position of the gradient? I can make a fill and offset the path and then move that gradient (which is a very similar effect), but gradient tool does not work on a stroke. I am just baffled by the idea that I can put a gradient on a stroke but then only change it by using the gradient palette to change the angle and /or height /width...and that honestly dosen't work well.
I don't seem to be able to change my stroke in brush or pencil. It keeps resetting back to basic stroke 1pt/basic/uniform. The only way I seem to be able to go around this problem is to first paint something and then select the stroke and choose the stroke width, etc., but that's too time consuming and very difficult to work. I am using CS 5. "New Art Has Basic Appearance" is unchecked.
I need to create a positive space triangle in photoshop. I know how to create a triangle and fill it with colour but I don't know how to make different sections within that shape so I can assign different colours to each section (a positive space triangle has horizontal bars of each colour of the rainbow inside it).
