I'm having trouble with the spacing of my text when I import a .rtf file. The spaces change width based on the width of the columns. The problem does not effect all the paragraphs only select ones. If I change the width of the column the spacing of the text will fix itself. All of the text is the same text style. I have attached a copy for reference.
View 2 RepliesI drew a cured line with the brush tool in illustrator CS5, but when I select the new "width tool" to change the width, it doesn't work.
Here are my steps:
1. Select the paintbrush tool
2. Draw something
3. Select the "width tool"
4. Try to change the width but it won't work.
Since I draw with the paintbrush tool, the "width tool" can be very handy if I can get it to work.
Is there a way to constrain a few objects to an attribute text box width? I want the background box and line to stretch, based on what is typed in that attribute box.
I know that if I make the attribute, a multi-line attribute, I can add a backgroud mask. I don't want to take this route, because the mask boundary varies, depending on what character is typed. Also, there is a gap between the mask and line I would like to maintain.
I tried some constraint stuff, but all I seem to be able to constrain is the insertion point of the text box, and not the width grip...
whats the difference between creating a width using layers and using polyline width?
View 2 Replies View RelatedTrying to use the width tool, I ran into the following problem. I would like to have a smooth transition of the stroke width between two width points while keeping the original stroke width unchanged outside of that line segment.
There are four width points here: two end points and two in between. The original stroke width is 200. The two on the left have one side set to 100 while the two on the right have one side set to 50. I would like to eliminate the distortion of the line width occuring in the first and third line segments. The only solution that I have come up with so far is to place two additional width points very close to the two middle width points: one with a 100-unit side to the left of the second point in the picture and one with a 50-unit side to the right of the third point in the picture. Yet there will be a small distirtion in between.
My Stage is set to 100% w/h. I'd like to center a div, and have it scale based on a percentage of the Stage's size. The div contains animated text and images.
I've seen some similar examples but the Stage always seems to be set to pixels.
I'm having an issue where I'm creating a white border around two landscape oriented images that are the same exact size then doubling the width of the canvas. I've never had this issue before with PS CS6.. I tried resetting the photography workspace but no luck. I tried with two portrait oriented images and the same result. I've restarted my machine. I'm on Windows 7 Pro 64bit and I'm running PS CS6 64bit as well. Thought to do a repair through Programs and Features but there is only the option to uninstall. I haven't done anything out of the ordinary except use an action a few days ago I downloaded and used from
[URL]........
and I downloaded and used the press print action.
How I can correct this? If an image is 20 inches wide and I'm doubling it to 40 it's tripling the width to 60 inches. Is there a way I can reset every aspect of PS CS6 to get back to a factory state other than uninstalling and reinstalling?
Can I reduce the palette width in LR 5 down to the width of LR 4? I am able to enlarge their width from the standard width – but how to reduce them? I am missing 100 pixels (2x50) for image view.
View 1 Replies View RelatedThe fixed width function did not work when I wanted to draw a fixed width rectangle. Is there a new way to do this in CS6?
View 4 Replies View RelatedI create Table using Autocad .net api C#.
var table = new Table();
In single text(class DBText), change text width of the property - WidthFactor.
How change text width in table cell using autocad .net api C#?
I'm working with AutoCAD 2012 and I want to modify the width of the Layer Panel in the ribbon. I have layer names that are sometimes too long to see. Is there still a MNU or MNC or a file like that that I could edit and change the width of the panel in the ribbon?
View 2 Replies View Relatedwhen I change the pline width to a certain thickness it don't show a solid thick line, it appear like hollow line.
View 2 Replies View RelatedI found this routine [URL]...... that changes the width of an attribute in a block. After use it, I need to use the ATTSYNC to update the other instances of the bloc in my project.
How to modify this lisp that I receive a prompt to choose if the width attribute will be change just in the selected block or in all instances of the block? In that way, I would not have to use the ATTSYNC command each time.
I have a number of attributed dynamic blocks with multi vis states, that I wish to change from attribute text width factor 1, to 0.85, as per client specified requirement for the particular project. There are quite a number of different named blocks on each sheet, copies of each block, and quite a number of sheets involved.
Using BATTMAN or EATTEDIT I cannot select all attributes and change width factor in one go. It can only be done one at a time, a laborious task at best. GATTE appears not to be able to change width factor.
Any method of selecting all attributed blocks in a sheet, then changing the attribute text width factor on all to 0.85 in one fell swoop?
working at new job with 2d but some how properties where i can change text width is replaced with 3D visual. how can i change this back to 2d properties?
View 1 Replies View RelatedI'm having trouble with stroke option in illustrator. It was working just fine but now its stuck at 1pt and I cant increase or decrease the stroke width no matter what I do.
View 6 Replies View RelatedFrequently when I am using LR4, from the intial to the latest patch, I have a very persistent double arrow. The double arrow is the one that points left and right, and is intended to occur when you are hovering over the side of a window pane and you want to drag it left or right.
My problem is that I get that arrow much more frequently then when I want to change the width of the window. I get it constantly when I go to do keywords. Sure I cross over the window boundry where it might naturally turn into that arrow, but I am exclusively working in the keyword panel. And that double arrow remains. I need to shake my mouse a bit to make it disappear.This is not a problem that occured in Lightroom 1, 2 or 3.
I was wondering if there was any way to maintain stroke width (with antialiasing off) when importing/resampling vector files, like pdf. photoshop does this, i think.
i made a test case that shows the issue in the attached files. the PDF is a 1px-stroked square. when i try to rasterize it to 100dpi (or any dpi other than 72) using Gimp or any tool that relies on ghostscript for rasterization (imagemagick, mupdf, xpdf) i get a square with unevenly stroked edges. photoshop's algo maintains the stroke width in favor of maybe less optimal positioning.
is there any way to make Gimp or any other pdf->png rasterization tool (ghostscript included) prioritize stroke widths over positioning?
original:
drawing.pdf (Size: 960 bytes / Downloads: 55)
gimp:
photoshop:
I need to be able to grab all polylines and change global width at once. This is a repetitve task that i have created a button for. I am trying to use this but it is not working. It gets hung up on me wanting to manually select the polylines when i thought i grabbed them with the first line.
(ssget "X" '((8 . "LayerName")))
(command "PEDIT" "w" "9")
I have a bolt program that draws the thickness of a bolts in elevation as a polyline with a global width, what i need is a lisp to then change this lwpolyline to a hatch, ie if global width is 20 and the polyline is 30 long i need to change this to a 20x30 solid hatch, is it possible to get the the global width and length and convert this to a boundary hatch? I need the same thing done for bolts in plan too as the circle is a lwpolyline also.
View 9 Replies View RelatedI want to change the color, line type, width and layer of all my blocks in my drawing. is there a way to do this with out opening all the blocks for editing? I am using AutoCAD 2009.
View 1 Replies View RelatedI created a pattern in Photoshop CS6 for a project with shape lines which reside on shape layers. I want to change the line weight but after I create them it seems there is no way of changing the shape; even after I select line.
I can change the spread (uniform distribution) of the lines and lengh but not their weight. No matter if I choose all or just one of the lines which are all on the same shape layer the weight does not change. This does not make sense. [URL]....
I have a brush that is square. Is it possible to change just the width or just the height and if so, how?
View 2 Replies View RelatedI have attached a file.
Is it possible to change stroke with of the green shape?
My Xara goes to None and 1,78px only, I think I've magically fixed it to 1,78px stroke width, not knowing how.
I am new to CorelDRAW. I am using it to generate scientific application notes that contain both graphics and text. I am running into a problem where I have a negative number that is close to the end of a text line (using justified format). CorelDRAW wants to treat the negative like a hyphen and keep the "-" on one line and then moves the number to the next line. For example, if the phrase "...cooling to -150 C for 5 minutes..." were to wrap across a line, it would look like:
"...cooling to -
150 C for 5 minutes..."
Instead of:
"...cooling to
-150 C for 5 minutes..."
The only way I can figure out how to get past it is to change the width of the text box so the lines wrap in different places. I have tried adding a space or two, adding hidden text (text with the same color as the background).
Is there maybe keyboard shortcut to change the width of a Line?
For example similarly as at texts the Ctrl + Shift + < and Ctrl + Shift + > do that, changing the text size down or up.
I created an action to change the width of an image. I execute the action using DoScript javascript method.
The first action Obj1 will select the whole image and second action Obj2 will open the transform panel and change the width of the image.
app.Open("D:LWW_Castoff45991_09_03.eps")
app.DoScript("Obj1", "LWW")
While (app.ActionIsRunning)
Thread.Sleep(500)
[Code]...
In the above code, the second action 'Obj2' is not getting executed. Both the actions are getting executed individually. Let me know the problem and how to execute both the actions.
We do hundreds of images for our main client for print purposes. As part of the work, they want all of the final images run through Save for Web saved as both a .jpg and .png file at 1000 pixels wide.
The problem is, if you try to create an action for this, the size the action saves is a percentage and not a pixel width. So it's impossible (so it seems) to save an action that sets the scale as a proportional resize with a fixed output of 1000 pixels wide. Since all of the images vary in size and it insists on saving the size as a percentage, you can't create an action that will work.
I've tried to see if there's a way to modify the action to change the output to a pixel width, but can't see how to do it. Is this even possible? It would save us TONS of work not having to manually open each image twice and saving for each format.
So i have this piece and i need to be able to colour different sections of the stroke around the whole piece with different colours. Also, i need to be able to change the width uniformly on sections between anchor points. I DO NOT want to use live paint as it takes away the sections of stroke i have tapered off already, however, the effect you get when using the live paint selection tool is exactly what i need
Is there a way of doing this at all?? It seems that i should be able to do it but i'm not able to find the right button, option or combination of both.......
For some reason, it's stuck on 1 inch, and won't change.
View 12 Replies View RelatedElements 9 crashes when I try to change the width of the block eraser with alt-rightclick? Can i prevent this?
Example: