Photoshop Elements :: 9 Crashes When Try To Change Width Of Block Eraser With Alt-rightclick?
Apr 16, 2013Elements 9 crashes when I try to change the width of the block eraser with alt-rightclick? Can i prevent this?
Example:
Elements 9 crashes when I try to change the width of the block eraser with alt-rightclick? Can i prevent this?
Example:
Cursor does not change to a circle when using the eraser.I'm sure it must be a tick box somewhere.
View 1 Replies View RelatedI have a number of attributed dynamic blocks with multi vis states, that I wish to change from attribute text width factor 1, to 0.85, as per client specified requirement for the particular project. There are quite a number of different named blocks on each sheet, copies of each block, and quite a number of sheets involved.
Using BATTMAN or EATTEDIT I cannot select all attributes and change width factor in one go. It can only be done one at a time, a laborious task at best. GATTE appears not to be able to change width factor.
Any method of selecting all attributed blocks in a sheet, then changing the attribute text width factor on all to 0.85 in one fell swoop?
I'm having trouble with the spacing of my text when I import a .rtf file. The spaces change width based on the width of the columns. The problem does not effect all the paragraphs only select ones. If I change the width of the column the spacing of the text will fix itself. All of the text is the same text style. I have attached a copy for reference.
View 2 Replies View RelatedI drew a cured line with the brush tool in illustrator CS5, but when I select the new "width tool" to change the width, it doesn't work.
Here are my steps:
1. Select the paintbrush tool
2. Draw something
3. Select the "width tool"
4. Try to change the width but it won't work.
Since I draw with the paintbrush tool, the "width tool" can be very handy if I can get it to work.
IM TRYING TO ERASE THE BACKGROUND OF A PHOTO I HAVE.
WHEN I USED THE BACKGROUND ERASER TOOL FOR THE FIRST TIME IT ERASED THE BACKGROUND TO WHITE OK .
NOW WHEN I USE IT IT ERASES TO A CHECK PATTERN COLOR.
MY QUSETION IS HOW DO I CHANGE THE COLOUR OF ERASER TOOL SO WHEN I ERASE SOME BACKGROUND IT GOES TO WHITE .
Is it possible to change the checkerboard that appears when using the eraser to something closer to the dominant background - I usually work with a white "canvas" and the checkerboard is very distracting.
View 5 Replies View RelatedIn the past, I've never had a problem with the eraser until today.
Instead of erasing, it will use the second color that you can use with your brush. I'm not sure what it is called, but it where you can choose colors for your brushes. My brushes seem to work fine, so it is just the eraser brush.I've already uninstalled PSE9, reset PSE9 back to default settings, and reset all tools settings with no luck.
It would be nice to have vba scale the thickness of the the eraser tool based on the current zoom setting. What i'm after is every time i click on the eraser tool, it will autosize to 2% of the current window size. So if im zoomed in really far and the current window has a wdith of 1 inch, the diamter of the eraser would change to 0.02 of af inch. Where as if I was zoomed out far and the current window had a width of 24 inches, the eraser thickness would default to 0.5 inches or something like that. The idea would be for the diameter of the erser to always be the same thicknes % of window size no matter what zoom level im at.
I can figure out how to get the current zoom level, and I know how to make this script run by altering the customization and setting this script's hot key to X. but im not sure if there is a function to change the thickness of the eraser. it doesnt seem to record when I attempt to record a macro.
I'm using a Wacom Intuos2 tablet with GIMP 2.6.12, and it works fine except as the subject says, the eraser works like a brush. In Photoshop, I don't recall exactly what it does, but I believe switching to the eraser (meaning flipping the pen over to the "eraser" side" switches from the foreground color to the background color, so that it effectively works like an eraser.
How can I do that, or something similar, in GIMP? I've searched everywhere and most of the posts have to do with getting the tablet recognized (check) and implementing pressure (check).
The eraser tool will only appear as small crosshairs no matter what I try.
View 1 Replies View RelatedI recently bought PSE 10.I have an Intuos 3 Wacom tablet and whenever I switch to the Eraser tool, in the brush preview icon (top left corner) I see this ~ type of a shape with narrow-pointy edges, indicating that the size-pen-pressure feature is on. This is always true, even when I switch off all the per-pressure options via the Brush tool.
how to control or at-least disable the pen-pressure feature while in the Eraser tool?
I created a pattern in Photoshop CS6 for a project with shape lines which reside on shape layers. I want to change the line weight but after I create them it seems there is no way of changing the shape; even after I select line.
I can change the spread (uniform distribution) of the lines and lengh but not their weight. No matter if I choose all or just one of the lines which are all on the same shape layer the weight does not change. This does not make sense. [URL]....
I have a brush that is square. Is it possible to change just the width or just the height and if so, how?
View 2 Replies View RelatedI have a dynamic block with several look-up values for the polylines width and I'd like to label them (as a text in the drawing over the block), and be able to move this label where best fits. I've being trying inside the block, but then it can't be moved outside of it. I tried MText with field outside the block, but it has to be applied in many one by one.
Should I use the block itself (how?) or there is a lisp for this? I have a lisp for bearing and distance for lines, which places the bearing text above them and the distance text below those lines, no matter what angle is. It will place in the middle and in the same angle as the line. I edited this lisp file, but how to change it for my purpose, as I don't understanding all the codes inside of it.
I can't change my eraser size - when I want to erase bits and bobs of the background to an image, I can't really do the niggly bits - for example, if I had a photo of a mug, I couldn't get into the ear of the mug without obliterating the handle.
View 2 Replies View RelatedWe do hundreds of images for our main client for print purposes. As part of the work, they want all of the final images run through Save for Web saved as both a .jpg and .png file at 1000 pixels wide.
The problem is, if you try to create an action for this, the size the action saves is a percentage and not a pixel width. So it's impossible (so it seems) to save an action that sets the scale as a proportional resize with a fixed output of 1000 pixels wide. Since all of the images vary in size and it insists on saving the size as a percentage, you can't create an action that will work.
I've tried to see if there's a way to modify the action to change the output to a pixel width, but can't see how to do it. Is this even possible? It would save us TONS of work not having to manually open each image twice and saving for each format.
I have a tag block that calls out details. The attributes are the detail number and the page the detail is located. I was wondering if there was a way that the bounding box around it could grow or shrink depending on the width of the text.
Tag.jpg
I'm having trouble with stroke option in illustrator. It was working just fine but now its stuck at 1pt and I cant increase or decrease the stroke width no matter what I do.
View 6 Replies View RelatedFrequently when I am using LR4, from the intial to the latest patch, I have a very persistent double arrow. The double arrow is the one that points left and right, and is intended to occur when you are hovering over the side of a window pane and you want to drag it left or right.
My problem is that I get that arrow much more frequently then when I want to change the width of the window. I get it constantly when I go to do keywords. Sure I cross over the window boundry where it might naturally turn into that arrow, but I am exclusively working in the keyword panel. And that double arrow remains. I need to shake my mouse a bit to make it disappear.This is not a problem that occured in Lightroom 1, 2 or 3.
I have created a dynamic block with a stretch, flip and rotate. Everything works great in its file. When I insert it in another file, the grips move but the block does not change.
AutoCAD 2014
I need a lisp can change all elements in block to layer 0 except layer defpoint but still keep linetype, color as it is.
View 1 Replies View RelatedI have attached a file.
Is it possible to change stroke with of the green shape?
My Xara goes to None and 1,78px only, I think I've magically fixed it to 1,78px stroke width, not knowing how.
When the block is in a drawing and I click it, it takes me to block editor.
However if I go to it in block editor and test block it allows me to change the attributes.
Why does clicking the block go to block editor and not allow me to change its attributes as it does when I test block.
How can i easy change the layer colors of all elements in a block and also the blocks in that block witout exploding everything ten times. I wish Autodesk create a button so if you select a block and use the button i had a choice to
select a layer or color. Looks so simple.
* setbylayer is not what i mean
* also don't want to use xrefs
I have a book cover that's supposed to be 6.125 x 9.25 but adobe elements 9 will only resize the width to 6.127. It has to be specific and not a millemeter off. I've tried to crop it but it resized the whole cover to half its size.
View 1 Replies View RelatedI am new to CorelDRAW. I am using it to generate scientific application notes that contain both graphics and text. I am running into a problem where I have a negative number that is close to the end of a text line (using justified format). CorelDRAW wants to treat the negative like a hyphen and keep the "-" on one line and then moves the number to the next line. For example, if the phrase "...cooling to -150 C for 5 minutes..." were to wrap across a line, it would look like:
"...cooling to -
150 C for 5 minutes..."
Instead of:
"...cooling to
-150 C for 5 minutes..."
The only way I can figure out how to get past it is to change the width of the text box so the lines wrap in different places. I have tried adding a space or two, adding hidden text (text with the same color as the background).
I create Table using Autocad .net api C#.
var table = new Table();
In single text(class DBText), change text width of the property - WidthFactor.
How change text width in table cell using autocad .net api C#?
I'm working with AutoCAD 2012 and I want to modify the width of the Layer Panel in the ribbon. I have layer names that are sometimes too long to see. Is there still a MNU or MNC or a file like that that I could edit and change the width of the panel in the ribbon?
View 2 Replies View RelatedIs there maybe keyboard shortcut to change the width of a Line?
For example similarly as at texts the Ctrl + Shift + < and Ctrl + Shift + > do that, changing the text size down or up.
when I change the pline width to a certain thickness it don't show a solid thick line, it appear like hollow line.
View 2 Replies View Related