I am aiming to recreate the texture of the trees in this site map. It looks as though it was originally created with a marker pen, and has several shades of green that I want to also wish show. I have already created the trees, so its just the coloring i'm struggling with.
View 2 RepliesI am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedI use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
how to recreat this image, but with my own text of course. I've given it several attempts,
View 9 Replies View RelatedI've found that the actual font was made by Bethesda (The company that makes the game) and not available on the web. I'm using a substitute, but now my biggest concern is the effect on the font.
So obviously it's a hard Bevel and Emboss, but it's the texture that's killing me. It's either hand-brushed or has a textured overlay.I'm counting on the latter.
Recently, with the release of the next gen consoles, I decided as a challenge to myself to try to recreate the Xbox One controller in photoshop
Here is what i have done until now.
Here is the exact image I am trying to recreate. URL...
Now the thing that I don't know how to do correctly are two things:The first being how to make the bumps around the two joysticks And second, the general lighting on the controller.
Also, ignore the 2 buttons in the middle and the gray part where the logo sits (not finished work)
I'm trying to recreate a font used on a poster type thing im making. the text i have used are just images and i cant remember how to alter text you enter to make it look similar to what i already have.
View 5 Replies View Relatedtrying to recreate the mercury/liquid chrome-ish effect I created a while ago. The effect is based loosely off of the other picture I have attached. Note that the mercury picture is a quarter the size of the original (to shrink the file size. Also, any other methods for creating mercury effects would be great.
View 1 Replies View Relatedhow I might reproduce the floor in image?
how to make a grid, and rotate it, and change the perspective, etc. What I can't figure out, is how to get the grid to blend together in the background as if it goes on for a very long distance. Even if I start with a huge grid and then rotate and shrink it down how I want it, it doesn't look like that picture. The 'far away' grid lines get faint and do not start meshing with each other.
I'm sure i can locate a tutorial for clouds, Just i am recreating this cloud BG effect but i cant find that really nice bright light effect over the clouds and the really bright shine around the human layer.
View 3 Replies View RelatedIllustrator cs6 - I have used image trace to create a 3 colour image of a photograph. Is there a way to create layers based on the three colours? (One layer for each of the three colours)
View 2 Replies View RelatedI use VideoStudio X2 for most of my video editing but I haven't been able to recreate a menu that I regularly use in VS9. I wanted the icons to approximately a certain size and the ability to have 2 lines of descriptive text underneath. VS9, whilst perhaps a little clunky in the way it works, does have the flexibility I need. In my DVDs I might have 30 title so I do want 6 on a screen and about 5 menus are created.
I have attached my VS9 template (ignore the Background Image referring to VS10). With this template, I can just keep adding files or create new discs with no changes required to the format and only some minimal text editing. Can VS X2 be tweaked to have a similar menu?
I have always encoded in MP4 for my PS3 with previous HB versions. Version 0.9.4 has removed the PS3 preset. What is the GUI recipe for the old PS3 (using MP4) preset?
View 1 Replies View RelatedRecreating this in Vray? I've struggled with it which may be due to my lack of experience with Vray,
Diffuse:
Reflection:
SSS:
Combined:
I'm not worried about the foam or the atmospherics as I already have some working systems for that. I just can't wrap my head around the shader.
Here is where I am at so far (rough comp test):
I want to transfer one of my drawings onto the illustrator and make it a vector file so it can be engraved with a laser, I have uploaded the image and trace image, where do i go from here?
View 2 Replies View Relateddo the people know if you can find matching colours in one image? as in i find a colour with certain RGB dimensions, can i find the same or 'roughly' the same colour and whereabouts the same colours are, in the same image.
the problem is im trying to paint a picture and i want to know which colours are the same so it correspsonds almost exactly when complete (its quite a fiddly picture so correct colours are essential)
to saturate an image to make it all tones of one colour?
In particular "saturation_olive" is very smoothe with the shadows and tones still quite prominent.
I need to put this color: 514a4a, in a image. But if I click Ctrl + U, it don't let me put the HTML color code: 514a4a.
View 2 Replies View RelatedI'm new this forum and I really need help on touching and improving of images. For instance, the image below - I would like to have a clear/transparent background so it looks like those photos that are featured in catalogues.
View 10 Replies View RelatedI'm starting with a colour image which I can transform into greyscale ok, but I want to retain a portion of the image as colour........
View 3 Replies View RelatedI just created an image for a website (The image was created using a number of layers and has a res of 180 pixels/inch).
The image in PS looks nice crisp and bright. When I save it down to either a .gif of jpg file and upload it the colours, when viewed via a web browser appear to have less luster and look pale by comparison.
I used the standard PS save settings when saving the file.
how I can improve the quality of my images?
I've scanned in an image of a drawing that I did on tracing paper with a black ink pen. When the image comes through onto my screen there are some white areas that are 'shaded' a 'dirty' brown colour. I could go through and try and erase all the shading but that would take ages and it's not very efficient.
View 8 Replies View RelatedYou can see on the attached image that there is a green wave form between the words. When i imported the pic into photoshop for my website design project the pic was this way but as a newb i think have changed a setting somewhere and now the waveform is white like the writing. Even when i import the image again the waveform it is white in photoshop but not when i open it indipendately.
View 1 Replies View RelatedI have a image text logo which has a white background.
I would like to add a colour to the background without distorting the text.
I'm trying to erase all of a single colour from an image. I use the colour range select to choose the colour (orange) however when I erase, it seems to erase an underlay underneath colours (esp yellow) in unselected areas.
How can I stop this?
I have an image which 256x256 pixels in size and i need it to be a 24Bit colour PNG. But the programme won't allow me to do it. where im going wrong or what ive missed. I have photoshop CS4 extended.
View 2 Replies View RelatedI am trying to change the colour of a selection of an image - in this case a mug. So obviously, I want the mug and the mug only to change colour (and not the area inside the handle).
The mug is white meaning I cannot adjust the hue/saturation.
I recently turned down a job (foolish I know) because I didnt have a clue how to go about doing it.
I was asked by a shoe company if I was able to photoshop a load of images of white wedding shoes and change each one into the 35 colours they offer.
Attached is the sample they sent me which I've cobbled together showing one of the colours they do (green) and one of the white shoes that would need changing.
Now while Im not a photoshop pro, I have the basic grasp of selecting objects using the quick selection tool etc.
The two burning questions for me would be:
1) once I've selected the area of the shoe that needs changing, how to change the colour. I know I could "paint" the shoe with a colour and set it to say 50% transparent so you can see see the shadow etc but how do you change it and keep all of the shading etc?
2) The reflection - this seems a near impossible task. How to select just the bits needed?!
I have been given a colour background which is mostly blues but its a cymk jpeg image and for print it needs to be converted to a spot colour in photoshop.
I dont really use channels etc and cant find a good tutorial on how to convert it to a spot? Could someone please give me a guide if thats possible?
I need to change my CMYK image so its suitable for Spot..
View 1 Replies View Related