Photoshop :: Full Colour To Two/Three Colours
Jun 12, 2004Im playing with doing some tee shirt designs on PS. Is there an easy way to get a full colour photo down to two or three colurs for screen printing purposes?
View 5 Replies
ADVERTISEMENT
Photoshop :: 3 Colour T-Shirt Design From Full Colour Image?
Aug 19, 2013I am designing a T Shirt for my ski club.I have taken an image from a banner (made in illustrator, full colour image attached) and I want to devide into a 3 colour image for the t shirt (I am only allowed 3 colours for printing).The colours I want to use are black, white and purple. The colour of the t shirt is a light blue.I want to then put the purple logo on top of the white and black too.So I'm after a black and white grunge background with a punchy purple logo on the top.All of this should be on a tranparent or, for design purposes, light bue (same as T Shirt colour) background.
how to split a full colour image into using only 3 (4 including transparent/light blue background) exact colours.
If I were going to black and white I might convert to grey scale and then paint areas to fully white or fully black using an overlay brush I don't think this works for me for more than just black and white though.
I have attached two of my attempts where I used the colour range selection and level adjustments. Niether was really successful though (one does not use the right colours or number of colours but looks quite cool).
Photoshop :: Converting Full Colour Image To 2-colour?
Feb 25, 2004I've been asked to convert an image to 2 colour for printing. I have the image as a full colour CMYK layout (with layers), but the whole thing needs to be converted to 2 colour. I have the pantone reference numbers for the 2 colours it is to be converted to. I am familiar with the hue/saturation tool, but this just seems to convert it to one colour, and you have no fine control over the exact colour you want.
View 3 Replies View RelatedPhotoshop :: Using The Colour Sampler With Curves To Adjust Colours?
Aug 31, 2005can anyone tell the advantage of using the colour sampler in conjunction with the curves adjustment when correcting colour casts in a photograph?
I have a photograph with a slightly blue cast on it and ive corrected it by opening the curves pallete and ctrl clicking the image to place dots on the curves and adjusted the curve accordingly.
I have read that it is a good idea to place 4 color sampler points on the image and use them somehow in conjunction with the curves. But how? Has it got something to do with eyeballling the color sampler readouts in the info pallette. I cant work out what the advantage of doing it would be.
Photoshop Elements :: Removing Colour - Add The Original Colours Back?
Nov 22, 2012I remeber at one time I was able to convert a color image into black & white by reassing Control, Shift, U. Then there was another command that would allow be to add teh original colors back in where I wanted them, giving me a color and black & white image. I just cannot remeber how I did the second step.
View 2 Replies View RelatedPhotoshop :: Monitor Screen Colour And Printed Document Colours Don't Match
Apr 4, 2006I'm having trouble getting both of my printers to print out to the same tone/colour that is displayed on my Monitor. Neither are accurate
Is there anything I can do with my monitor settings, or my photoshop/illustrator colour settings so that what I see on the screen is what will be printed out.
The printers are :
1) Hewlett Packard 1220C
2)Epson Stylus 2100
They both print out differently.
For the HP printer I've looked at the 'Image Colour Management' and it states the 'ICM is handled by host'
For the Epson printer the Colour Management is set to 'Automatic: Windows will automatically select the best colour profile from the list of associated color profiles'
I know it's possible to change the Color Setting in Photoshop but I don't really know what to set it to, and who to set it so it's as close to my monitor display as possible. (I work with RGB colour)
Xara :: Import OR Add Colours To Permanent Colour?
Nov 27, 2012I've got a need to import a couple of colours OR add a couple of colours to the permanent colour.
I am using MX Photo&Grphic Designer and WebDesigner. I use webDesigner to create and administer a business website and use MX2013 for my graphics (Business graphics that use a pallet of company colours). Everytime I open a new document (tab) in MX2013 I need to recreate my company colours and name them. This is also the same in WebDesigner.
Is there anyway to add colours to the permanent colour pallet so they are available for every document as a default? This small item would save me some time and the frustration of constantly needing to add the same colours to my pages over and over.
Photoshop Elements :: Change Background Colour To Viewing Screen When Reduce Image Below Full Size
Mar 14, 2013Currently the screen has a black border when I scroll to reduce the image size. Originally it may have been white.
View 1 Replies View RelatedAutoCad :: Printing Layouts To Full Colour / Exported To PDF - Faint Prints
Mar 19, 2013I'm having issues printing layouts to full colour. I've Exported to PDF and plotted to a printer and the same things keep happening. The Polylines and hatching keep being faded whilst printing. I've checked lineweights, I've turned off everything to do with fading - even layer managers setting fade slide bar is turned off. I've massed with plot styles and still it is happening.
View 9 Replies View RelatedAutoCAD Inventor :: No Display Of Colours In Tools Application Options Colours Tab?
Aug 16, 2013 In my Autodesk Inventor 2012 product design suit there is nothing displayed when I Press
Tools menu
Appliction Options
Colours Tab
GIMP :: Reduce Couple Of Colours And Separate The Colours Into Different Layers
Feb 7, 2014I use gimp to make layered stencils for spray painting...I reduce it to a couple of colours, seperate the colours into different layers and then cut them out...
When I do im left with a ghost type image where the original layer was..
example: [URL]...
Is there any way of avoiding this?
Photoshop Elements :: Can't See Full Screen When In Full Edit Mode On MacBook Pro?
Feb 20, 2013I can't figure out how to adjust the size of the program screen when in Full Edit Mode. I can see portions of the Quick Fix menu and none of the Guided Fix menu. There seems to be no way to resize the window.
View 5 Replies View RelatedPhotoshop :: Is There A Way To Set My Colours To 2 Colours Instead Of 4
Apr 8, 2006i'm working on a job with 2 colours. I already did this using CMYK and setting 2 of them to 100% and the other 2 at 0%. But people who press these posters say me that they always have to convert the CMYK file to a 2 colours file. Is there a way to set my colours to 2 colours instead of 4?
View 2 Replies View RelatedPhotoshop Elements :: Why Won't Colour Swatches Created Stay In Colour Swatch Palette
Jun 18, 2013Whenever I create a new colour in the colour swatches it only stays there for a couple of actions while working on a project. I understand from others that once they create a colour it stays there. Why can't I get that to happen?
View 1 Replies View RelatedPhotoshop :: Replace Colour Tool Not Allowing Multiple Colour Replacement
May 21, 2013I am using CS6 and the Replace Colour Tool no longer allows me to replace multiple colours when I select the + . So when I have the panel open and I highlight the +, I used to then be able to click on several spots in my image and all of the colours that are in those spots are added to the selected colours that will be changed by using the sliders.
But now, when I use the + it has exactly the same effect as not using it - I can only choose one colour or an other, I can't add.....I want to reset this to the original way that this works.
Currently I have to open the panel, change one variation of a colour, save it, then re-open the panel and do it again (and again and again) until all the colour variations I am trying to remove are are changed. I know I also have the 'fuzziness' slider, but it does not give enough control.
Photoshop :: Colour Code For Background Colour On Particular Web Address?
Aug 10, 2013I will like to find out the colour code for the background colour on a particular web address. Unfortunately I am new here so not allowed to post links so will say this as creatively as possible. the address is theregentlagos (with the usual prefix beginning with w and suffix beginning with c for all websites). I am referring to the colour where the menu items like logo, home, brands etc are on.
View 1 Replies View RelatedPaint Shop Pro :: Colour Negatives - Removing Orange Base Colour Of Film?
Dec 19, 2011I have copied some colour negatives using my digital camera. What is the best procedure for removing the orange base colour of the film prior to converting them to positives?
View 9 Replies View RelatedIllustrator :: How To See Object Selected Change Colour Dynamically As Adjust Colour Sliders
Aug 11, 2013How do I see the object selected change colour dynamically as I adjust the colour sliders?
It seems the object only changes colour when I release the slider. But I want to see it dynamically change, so I can find the colour that works best without "hit or miss" - "trial and error" behaviour.
Yes... I'm aware some of you spend hours in colour programs creating a palette to work with. Good for you.
I'm just wanting to do it LIVE. Dynamically. In 2013. In Illustrator.
AutoCAD Inventor :: Replacing Colour Of Faces With Another Colour In One Hit (Parasolid File)
Aug 17, 2012I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
Paint.NET :: Colour Tint Tool - Specific Colour Scheme For Image?
Jul 16, 2013I use EdHarvey's colour tint tool and it changes colour of the whole image, I'm looking for something similar but it only changes selected colour, so that the image is left with mutiple colour scheme rather than just one, any addon that can do this?
From this example, you can see the figure on the right is in a brownish colour scheme, what tool can I use in order to make it's colour scheme blue like the figure on the left?
Illustrator :: (gradient Tool) Double-clicked Colour Stop But Colour Swatch Doesn't Come Out
Jun 11, 2012[gradient tool] I double-clicked the colour stop , but the colour swatch doesn't come outI hv tried a couple of times in CS 5 and also CS 6.
View 1 Replies View RelatedPhotoshop :: Adobe Colour Management Print Defaults Assigning RGB To B&W Pages And Incurring Colour Print Charges
May 23, 2013Adobe Colour Management Print defaults seems to be assigning RGB meta to B&W pages and incurring Colour Print charges for B&W prints.I can manually change the print colour management to Printer managed on a per print basis instead of the default adobe colour managed which "cures" the issue but I do not seem to be able to save that setting as the default.
View 1 Replies View RelatedGIMP :: Transform Similar Colour In Specific Colour?
Jan 28, 2012Any method to transform all the pixel of a colour similar to X(in RGB values) to X ?
View 7 Replies View RelatedGIMP :: Apply Colour Filter To Transform One Colour To Another
Jun 24, 2011I am working on a website that has existing template images. One of these in particular has a predominate blue background colour, specifically #0a2a35 (195 81 21 [HSV], 10 42 53 [RGB], 81 21 0 79 [CMYK]). I want to transform this colour to an orange colour, #be5d27 (21 79 75 [HSV], 190 93 39 [RGB], 0 51 79 25 [CMYK]). At the same time, I want to change the lighter and darker blue accent colours of the image to become variations of the orange colour.
I have tried several things already, and one method that almost worked for me was using the "Colorize" tool to match the HSV values of the blue colour to orange colour. It almost works except the RGB values don't quite match up.
Illustrator :: Copy Fill Colour To Stroke Colour?
Jul 28, 2012copy specific fill colour so that it can be filled in as stroke colour in other compound path. I attached 2 screen shots as below. I want to copy the blue olour to replace he red stroke.colour.
View 25 Replies View RelatedLightroom :: How To Convert Colour Negative To Colour Positive
Sep 12, 2013I have photographed some colour negatives in RAW. Any outline of a process as to how to convert these to positives using Lightroom v5. I have tried and failed!
View 6 Replies View RelatedGIMP :: Colour To Alpha Colour Picker
Jul 26, 2013Windows 7 and Gimp 2.8.2 in single window mode.
I am trying to to use Colour to Alpha by picking a specific colour from an image. But I can't get the colour picker to work.
The image has an alpha channel.
I choose Colour to Alpha, then click on the From swatch. The Colour to Alpha Colour Picker window appears. I click on the eyedropper. But when I move the eyedropper over the image, the cursor changes to the previous tool that was used. For example, if I used the zoom tool, the eyedropper changes to zoom as the cursor leaves the Colour to Alpha Colour Picker window, and zoom becomes active.
How do I pick a colour from the image?
Illustrator :: Select A Colour From Colour Wheel
Jun 4, 2013I would like to be able to select a colour like you can in photoshop. The swatches are very limited. I would like to select it from the colour 'wheel', where you can move up and down the slider to select the value and then move over the circle to select your colour? Or where can I find a huge swatch of colours?
View 4 Replies View RelatedPhotoshop :: Mixing Colours In CS5
Mar 27, 2012I've tried looking this up but just get the mixer brush on every hit or. What I want to do is to take two colours, use the colour picker and mix the two colours to make a third.
I know I can arbitrarily change the opacity or by steps with the number keys but I don't to do it this way. I don't want to use a blur too or a filter. This is mixing colours basics. The mixer brush looks like it mimcs painting in one respect but its also creating muddy values.
Photoshop :: PDF Has Different Colours Than TIFF?
Dec 17, 2012In preparing some files for print I noticed that a .pdf generated bij PS5 has different colours than a .tiff.
Both files have been saved without colour profiles.
Photoshop :: Can Change CS5 GUI Colours
Jun 23, 2012sort of like CS6, the dark menu has grown on me :P plus i thought it would match nicely with my dark firefox theme and dark GNOME interface AND my favour for dark BG designs.
I know i can change the background of the workspace, i've canged that to blue but my concern is more for the main GUI.
