I use gimp to make layered stencils for spray painting...I reduce it to a couple of colours, seperate the colours into different layers and then cut them out...
When I do im left with a ghost type image where the original layer was..
example: [URL]...
Is there any way of avoiding this?
In my Autodesk Inventor 2012 product design suit there is nothing displayed when I Press
Tools menu
Appliction Options
Colours Tab
I am in the middle of a huge project and all of a sudden have a major concern.
When I am using layers and the background is a photo of the colour blue (rectangular shape).Now as a new layer, I am pasting another photo (a smaller rectangular shape) on top,with say a car in the middle.
Then saving this 'montage' as one jpeg.Now, when printing this image, would the blue colour that is physically under the smaller car photo shine through underneath? Or would it only print and use what is physically shown, despite me knowing that underneath there is another darker colour?
(As the end result should just show the smaller rectangular photo with the car and that one being surrounded by a blue border.)
everytime that i try and match properties or change the line type by selecting a layer in the layer properites manager, all the lines stay the same (as if nothing has happened). the lines that i am selecting are not in blocks
why i can not change the lines types or colours?
When I create a Color Balance adjustment layer to colourise a selected area the Default Foreground & Background colours switch from Black/White to White/Black automatically with even the icon in the corner changing to reflect this (When switching manually back to Black Foreground the icon stays showing White as Foreground). By switching manually back I can refine Masks as I have been doing for sometime with the Eraser deleting parts of a mask and the Paintbrush adding to the size of the mask which is the logical way It seems like I have somehow changed the default Foreground/Background when applied to Adjustment Layers as I just tried using a Curves etc Adjustment Layers with the same thing happening with the defaults changing to White foreground etc automatically. Is there something I have ticked or changed that has made this change
View 3 Replies View Relatedi'm working on a job with 2 colours. I already did this using CMYK and setting 2 of them to 100% and the other 2 at 0%. But people who press these posters say me that they always have to convert the CMYK file to a 2 colours file. Is there a way to set my colours to 2 colours instead of 4?
View 2 Replies View RelatedIf I create a new image all works fine.
If I open an image that I have previously created (I'm working with .gif) and then select a colour on the pallet (it can be either FG or BG) and then try to place the colour on to the image - the colour is different to what I selected on the pallet.
I have the same issue with the 'bucket fill tool' or by selecting 'edit/fill with FG color' or by selecting 'edit/fill with BG color' or by placing a selected color text onto the image. I haven't tried using any other method.
I've tried deleting and reinstalling Gimp and I'm on Win XP PRO SP3.
I noted that when opening same jpeg image with the Gimp or a different viewer I get different results:
Gimp is no the right , EOG or geeqie on the left, I note a different tone of blue..
Why?? I am using The latest Gimp in Fedora 15.
I have myself a picture of my kitcar which I am looking to change the colour of however I want to preview a selection of colours using GIMP to see how they look on the car.
How to "overlay" different colours on the car? I am not sure how to go about selecting just the body of the car so that I can overlay different colours.
I would prefer to not have to hand paint each colour over the body of the car.
How do I make text with 2 colours?
©gosonyushidae@SSF
Like something similar to this?
The way I know how to do it is by typing the first word in black lets say, then open a new text dialogue on another layer and type in the other word with a different colour.
Is there an easier way to do this since I'm afraid that my text won't be in line with each other?
Best way to get the colours to be the same when I replace a face onto another face esp if you can lightly dust the colours in so the finished picture looks natural
View 1 Replies View RelatedI'm currently working on a forum template (phpBB), and I want to invert the colours of the background. I did it easily for some pictures, but I can't invert one of them.
It's a simple gif, I don't know why I can't invert it. When I go to the menu 'colours'->'invert', the option is disabled, even if I tried with several tools selected.
for example:
Colours > Curves ..... nothing visible. The toolbar shows the Curves options (histogram; sample average).
This happens for all selections in the Colours menu; all the other menus are working fine.
I know finding the magic words to use in a search can be the ticket!
I uninstalled gimp removed the .gimp2 preferences and reinstalled--
Edited: well this is embarrassing The png I was trying to edit with Curves had Indexed Colour layers.
when saving images for the web i try save them as indexed png's to save space.
however, when switching to indexed mode GIMP will alter my colours if i choose to use a palette with less colours than i have in the image. This is the most noticable if for example i have an image with bacgkround #ffcc00 and a multicoloured icon in the middle. due to the icon the image probably has over 100 colours. if i then choose 64 colours not only will it affect the colours in the icon, but change the entire, large, unicoloured background area to maybe fec50a (just an example). is there anyway to force GIMP to only use colours already present in the image?
I'm trying to change colours using the fill tool, but I only get different shades of grey, whatever colour I change it to. I've tested a couple of things and can't work out how to alter this... likewise, the defult patterns also come out in black, white and grey..
View 1 Replies View RelatedBasically I want to merge two images. Both of them are grey originally so I change them to RGB mode and change the colours separately. I then go to copy and paste one image on top of the other and it automatically changes to whatever the colour is of the destination image.
View 2 Replies View RelatedWhenever I open an image in Gimp, it's just a little off colour. Then when I save it as an image file (usually png), it's even more off colour than what's displayed in Gimp. For example, if the image starts out with a grey background of 808080 (RGB Hex Value, 16-bit), in Gimp it's 7F7F7F, and when I save as a png, it's 6E6E6E (honestly, how does that make sense under any circumstances?). I've tried every combination of settings under colour management, to no avail. Once, I managed to get Gimp to display the correct colour, but when I saved it as a gimp file, and re-opened it, it was wrong again.
View 13 Replies View RelatedI need to set transparency on a couple of layers, how do I do that in GIMP 2.8?
View 2 Replies View RelatedI'm using -color-matrix on a bunch of images to change colour temperature slightly:
convert -quality 94 -color-matrix "1.0 0 0 0 0.975 0 0 0 0.95" x.jpg y.jpg
Problem is, in sky areas, this causes patchy colours and banding issues. However, and this is the strange part, if I convert to TIFF (even using JPEG compression), and then apply the colour matrix, I don't get these issues.
BUT, even wierder, if I then try to convert the fine-looking TIFF image to JPEG again (even with -quality 100), I get these patchy colours again.
This is with GIMP 2.6.12 on a Fedora Linux system.
I've been using GIMP for a while for basic website stuff. Very basic website stuff. I've recently been asked if GIMP has some more advanced features. Well, advanced put to my usual level of use anyway.
So, I thought I'd query if I could do the following in GIMP...
(1) Edit a BMP but ensure the file size remains the same?
The person asking is using the images for a specific purpose and they always have to be the same size.
(2) Open .pspimages and possibly save back as this format.
The answer to this seems to be no on the opening front anyway.
(3) Restrict the image to a very limited range of colours, say 3-6?
Again this is due to the very specific and restricted nature of the images they are creating.
I am trying to make Apple's mostly greenish star space wallpaper for iPhones from iOS 7 (see the attachment #1) into beautiful gradient of colours.
The problem is that I do not know how to do it, so was only able to make a striped version colouring via huge brush, not true gradient.
how I could make a really smooth, gradiental transition between colours?
Attached File(s) Original greenish star wallpaper for iPhone.gif (256.91K)
Number of downloads: 6 iPhone45WallpaperStars.jpg (160.65K)
Number of downloads: 4
How to separate layers in gimp and save them in png format, theres a function for this in photoshop, so how do you do this in gimp? Basically i designed a template and i want to be able to click any layer and save it in png format but its not letting me, or how to save all layers automatically?
View 4 Replies View RelatedI have some very old GB postage stamps which can be identified by their plate numbers. The plate number, which is engraved in the design of the stamp, has an effect on the stamp's value. Unfortunately on a number of stamps the cancellation mark obliterates the plate number. I would like to be able, in a digital image, to lift the image of the cancellation mark to reveal the design underneath.
I have tried using Adobe and Corel imaging software without luck.
I'm new to GIMP. I want to use it to create/test colour (or greyscale) separations for a woodcut, but I'm finding it hard.
For example I have attached a black and white image. kirsty.JPG (84.7K)
Number of downloads: 3
I open the image in GIMP, then from Image I choose mode - indexed, 4 colours. So far so good as this gives me the 4 greyscale levels I need to create a two block woodcut. Now I use the 'select by colour' tool to find the first colour, and I paste this into a new layer. That works fine. Then I select the next colour and try to paste that into a second new layer, but it doesn't work. It produces another layer called 'Floating Selection (pasted layer)' and won't paste the second or third layers.
How can I separate the 4 layers into individual images??
I need to use Hex colours in illustrator, however, I can't find the option. Other info say's to go to the colour picker, but hex is not there.
Is it a colour set that I need to upload?
I've tried looking this up but just get the mixer brush on every hit or. What I want to do is to take two colours, use the colour picker and mix the two colours to make a third.
I know I can arbitrarily change the opacity or by steps with the number keys but I don't to do it this way. I don't want to use a blur too or a filter. This is mixing colours basics. The mixer brush looks like it mimcs painting in one respect but its also creating muddy values.
In preparing some files for print I noticed that a .pdf generated bij PS5 has different colours than a .tiff.
Both files have been saved without colour profiles.
sort of like CS6, the dark menu has grown on me :P plus i thought it would match nicely with my dark firefox theme and dark GNOME interface AND my favour for dark BG designs.
I know i can change the background of the workspace, i've canged that to blue but my concern is more for the main GUI.
I am exporting some graphics to PNG from Corel draw, but the colours are coming out ridiculous looking. The nice, wintry green, is flourescent green. I am using the RGB colour palette and exporting to RGB 24bit - is that correct?
View 6 Replies View RelatedWhy do I still loose colours if I copy an artwork into a new layout and close the original, I know if I select all the colours into the bar at the bottom it will keep them, but why should I.
This only became an issue in the last version and I would have thought it would have been fixed in this one.
Maybe it will come out in the next fix with all the other fixes for the dockers and flickering text again I know I can work around these things, but why should I.
When I print from Photoshop, I am getting this message before the printing commences:
"Some PostScript specific settings (emmulsion, Interpolation, Calibration, Encoding) will be ignored since you are printing to a non-PostScript printer"
Then when I print, the colours are all different than what is on the screen. I have not had this problem previously and everything I have printed looks great. This has only begun recently and I am not sure what has happened to make it like that. My printer is a hp deskjet 930C.