CorelDRAW X6 :: Loosing Colours
Nov 26, 2012
Why do I still loose colours if I copy an artwork into a new layout and close the original, I know if I select all the colours into the bar at the bottom it will keep them, but why should I.
This only became an issue in the last version and I would have thought it would have been fixed in this one.
Maybe it will come out in the next fix with all the other fixes for the dockers and flickering text again I know I can work around these things, but why should I.
View 10 Replies
ADVERTISEMENT
Nov 22, 2012
I am exporting some graphics to PNG from Corel draw, but the colours are coming out ridiculous looking. The nice, wintry green, is flourescent green. I am using the RGB colour palette and exporting to RGB 24bit - is that correct?
View 6 Replies
View Related
Jun 26, 2008
In my job as a cartographer I regualrly get asked to create advertisements for mining magazines. The ads usually contain both text and images. The colours I use in Coreldraw are PMS colours and the images are CMYK colours.
The problem I have is when I publish my ad to PDF the PMS colours always come out fine (which I would expect) but the image colours always look dull and washed out. The only time the images look fine when I publish to PDF is when I use output to RGB hut the printers then reject my ad (naturally). Is there something I need to do to the image in Photopaint?
View 14 Replies
View Related
Aug 16, 2013
In my Autodesk Inventor 2012 product design suit there is nothing displayed when I Press
Tools menu
Appliction Options
Colours Tab
View 2 Replies
View Related
Feb 7, 2014
I use gimp to make layered stencils for spray painting...I reduce it to a couple of colours, seperate the colours into different layers and then cut them out...
When I do im left with a ghost type image where the original layer was..
example: [URL]...
Is there any way of avoiding this?
View 2 Replies
View Related
May 20, 2011
I opened my CorelDRAW X3 to find that the colours on screen look corrupted.
I use the "Optimised for professional output setting" in Colour Management which I never change.
Now, rather than looking fairly close to printed colours, they look very bright... too bright! (see screen shot)
I think that i have had this problem before and i ended up uninstalling and reinstalling. I would like to avoid this if i can as have have a lot of custom settings that i would have to re-do.
View 9 Replies
View Related
Dec 20, 2011
If you noticed that the colour palatte colours in CorelDraw X5 are different to those in Version 10. It is more brighter and also come out much brighter when converted to PNG files.
When I zoomed in the PNG files in Version 10 I can see the small grey dotted on the image colours.
But these dotted not appeared on the PNG files in CorelX5. Is that the reason of different colours bright in X5?
What should I do to maintain the same colours bright of Version10 in X5? This is very compulsory as the PNG files version 10 has been use in the database for many years and I have to maintain the same PNG output after upgraded into X5..
View 4 Replies
View Related
Mar 20, 2012
when I pdf a coreldraw document, no matter which pdf-preset I use, the "Convert spot colours to: CMYK" is greyed out so I can't tick it. I need to pdf a document to send to newspaper print. I have never had a problem like this before using CorelDraw X3.
View 3 Replies
View Related
May 24, 2012
I have been using CorelDRAW 12 and 13 for about 7 years. I have a new problem. It's only become apparent recently, and I think it could be related to my recent change to Win7 from XP.
When I publish a file to pdf the colours do not translate properly. I use a lot of pantone colours, as I do fashion illustrations and textile designs, and for that reason it is important that my clients receive accurate colours.
Lately the colours have been coming up wrong. For example a green/blue aqua colour came up as a very darkish sky blue colour. Brown looked navy. All colours are either off or completely wrong. If I print from the cdr file, however, the colours are fine.
View 10 Replies
View Related
May 8, 2011
When I publish from X4 to jpeg, the (RGB or CMYK) colours appear much darker than they ought to. Is there a solution to this or could it be false settings, If yes, what settings.
[URL]....
View 9 Replies
View Related
Feb 17, 2012
I've been battling with moving tool bars between my CorelX4 PC's. I think I've finally figured out how to do it so far. Export/Import RecordedMacro.bas 'First' and make sure it's the same name on both PC's as importing a new one renumbers the *.bas file. I think this made a difference anyway.
Export/Import Workspace Toolbar next. I found if I imported the workspace first, I couldn't get the new toolbar to work.
Now, if I want to edit the colors of the toolbar as shown below, the current color doesn't show in the editing window, nor do I have any color options.
View 7 Replies
View Related
Apr 23, 2012
A macro that will group all alike colours on a page and then copy them to a new page?
We used to have this feature on a product called Vinyl Master. It is really good, but I don't want to run 2 systems for my artwork. We mostly do digital output, but have the requirement to cut vinyl too, mainly for mining vehicles.
It would save a heap of work if we could group all alike colours, then copy to another page, ready for output. Even better if they were nested.
View 3 Replies
View Related
Aug 23, 2010
I'm using Corel Draw X5 and I can't figure out how to add or edit colours in the CMYK (default) Custom Colour Palette. In X3 and earlier versions it was quite easy to add new colours and edit existing ones. I would also like to know how to move the order of the colours in the palette so that I can put one a custom colour near the top.
FYI I would like make these changes to the master / global CMYK palette, not just the one for a specific document palette.
View 7 Replies
View Related
Apr 8, 2006
i'm working on a job with 2 colours. I already did this using CMYK and setting 2 of them to 100% and the other 2 at 0%. But people who press these posters say me that they always have to convert the CMYK file to a 2 colours file. Is there a way to set my colours to 2 colours instead of 4?
View 2 Replies
View Related
Aug 29, 2013
When I create a shape I use the Shape from the drop down, create my shape and then using Layer Styles I create the look I want on the shape within CS6. When I have sent my file to another person who is using CS5 they cannot see my layer styles and they are lost... What is happening and how can I get them to see my layer styles?
At the moment for them to see it I am having to recreate all my shapes so they are Pixel rather than shapes? why this is happening? I have never had this problem before and I have used Photoshop for years!
View 2 Replies
View Related
Apr 14, 2011
I know I have an out dated version of VS, but all my videos are shot on a DV camera with 4.3 resolution.When I'm done editing I burn to a DVD using the VS program.
The quality of the DVD in not that good for some reason.I have checked all the properties and they seem to be right.But being a novice maybe the're not.If I save the file as an AVI then import it into another program (in this case Power Producer) to burn,I get a much better quality DVD.
PS. The reason Im sticking with VS 7 is that I can navigate around it fairly easily.Not saying Im confident, but enough to get by.May look into upgrading to a new version in the future with a new HD camera too.But for now VS 7 works fine for me.
View 4 Replies
View Related
Sep 21, 2011
I keep loosing the company logo (JPG image) on my title box when drawings are sent our to clients in DWG format, is there a way to resolve this? Currently i have moved a copy of the image into the folder containing the drawings i am working on, still have problems has it wont even copy to another drawing.
View 4 Replies
View Related
Oct 12, 2013
An interesting abnormally with Bridge 5.0.2.4 X64
Bridge is loosing images with keywords. After purging the cache and running a search all images return. However, this does not retain the images. I have seen the images disappear while watching the screen. Subsequent searches only retains a few of the hundreds of images with the keyword.
I have also removed and re-installed Bridge to no avail. I also believe I have the latest updates?
View 1 Replies
View Related
May 7, 2013
I edit my raw files in CS5. Then I saw as JPEG, and upload to be developed. Once the pictures are uploaded they look like I never edited them at all. What am I doing wrong. This does not happen if I edit a JPEG file.
View 1 Replies
View Related
Oct 19, 2008
I have opengl acceleration turned on and it usually works. Problem is that sometimes a document looses it's acceleration. I'm not sure when this happens, if it is when i switch between documents or when i switch between photoshop and other applications. I can rotate my picture, but at some point when I want to rotate, I just get message that says something like document has not acceleration turned on. Other documents may be alright.
Is there some control where I can turn back on the acceleration for a specific document when it has lost it? Is there some registry hack that would disable this loosing of acceleration of some documents (except the known hack which will force the acceleration on old gpu's).
View 15 Replies
View Related
May 4, 2008
I am doing the artwork for an album I am working on and need some help resizing the cover image. As of right now the image is around 3000x3000 resolution, but it needs to fit on a 5.5"x5.0" template. I copied the image from photoshop into illustrator and used free transform to scale it to the correct size. However, the image was pixelated and unusable. So I basically want to know the best way to do it without losing quality. Also, should I add the text before or after its been resized?
View 6 Replies
View Related
Oct 4, 2004
I created my layout with Photoshop CS. I brought the file in Image Ready to slice it but my bright mustard/gold yellow wasn't the same anymore. It was more of a greenish yellow. I tried to bring it back in Photoshop and the colours were perfect again. When I did Save for Web, same thing happened to my colours. I never had any problems before with other layout. Any idea what I am doing wrong?
View 3 Replies
View Related
Feb 2, 2012
I have attached the original DWG file that I am trying to get into 3DS Max. When I imported it, in the Import Options box, I played with Auto Smooth and Curve Steps and it didn't seem to work.
View 8 Replies
View Related
Sep 19, 2013
I draw 2 pipe profiles, who are crossing eachother. When i want to draw crossing pipe in one profile (IN PIPE NETWORKS), that pipe erased in the profile. What is the problem. I want to be seen crossing pipes in both profiles. In red color I draw a pipe which is missing.
View 5 Replies
View Related
Jan 20, 2011
When I a have a drawing with items wich contain hyperlinks. They work perfect in autocad. Also in DWF they work great! But when I plot to PDF. The items are not clickable.
I guess this is a "problem" with the PDF plotter. Which PDF plotter CAN recognize hyperlinks and put's them on the PDF.
PDF Creator plus 5.0?
View 8 Replies
View Related
Mar 22, 2013
I'm using AutoCAD 2010 32bit on Windows XP with built-in video - so no hardware rendering, etc. I have a situation where a 3D solid that I have created looses its fillets while creating a PDF.
The solid was built using Union, Subtraction, Slicing and Fillet operations. I have attached the DWG and two PDFs - one with fillets, the other without. Both PDFs were created within moments of each other from the same DWG. Notice in the DWG that the solid model has now lost all the fillets on the edges, but they were there when the good PDF was generated. I create the PDFs using ACAD's Output | Export PDF feature on a single Layout in Paperspace. When the PDF is generating, for about two seconds you see the solid edges loose their fillets, and then sometimes return to normal, but other times the DWG changes and I have to add the fillets again.
I know about using the Print option, and also 3rd PDF generators but they also fail - plus, I want to use Output because it's more convenient. I like AutoCAD, but I am thinking of dumping it for SolidWorks (which I just evaluated for 30 days). I can't be putting a lot of time into models that loose their fillets. This same issue happened to me about a year ago, and I finally had to re-create the model from scratch to solve. It's ridiculous that this doesn't work, it's kinda fundamental.
BTW: I tried a fresh OS and ACAD install and the problem persists.
View 7 Replies
View Related
Jul 25, 2012
I normally leave my machine on, however if i do shut down. I find on start up that my 3D mouse loses its connection. Clicking on start driver does nothing. I have to resort to unplug/replug the usb for it to be recognized. This is annoying since this means that i lose some of my setting changes.
Inventor 2010
View 7 Replies
View Related
Feb 5, 2014
I recently switched from a Windows PC with ACDSee, to a Mac system with Elements 11. I am currently moving files aboout on three different drives and have found that I have to constantly go back manually and search out files to re-establish connections. THis gets to be quite time-consuming as I have over 10,000 pics on these three drives. What am I doing wrong> What is actually happening to these files when I organize them? I am constantly re-filing these pics for different purposes and I thought I could get around this with Elements.
View 1 Replies
View Related
Mar 18, 2013
I'm using AutoCAD 2010 32bit on Windows XP with built-in video - so no hardware rendering, etc. I have a situation where a 3D solid that I have created looses its fillets while creating a PDF.
The solid was built using Union, Subtraction, Slicing and Fillet operations. I have attached the DWG and two PDFs - one with fillets, the other without. Both PDFs were created within moments of each other from the same DWG. Notice in the DWG that the solid model has rounded edges (fillets) along most edges, but they are missing in the bad PDF, and show in the good PDF. I create the PDFs using ACAD's Output | Export PDF feature on a single Layout in Paperspace. When the PDF is generating, for about two seconds you see the solid edges loose their fillets, and then sometimes return to normal, but other times the DWG changes and I have to add the fillets again.
BTW: I tried a fresh OS and ACAD install and problem persists.
PDS 2014/Win8 64/32GB RAM/256GB SSD RAID1/Asus P9X79 Deluxe/i7 3820/nVidia Quadro K2000D/Dual 27" LCD
View 1 Replies
View Related
Apr 6, 2012
I have two designs for labels that have to be approved by the government for type size regulations. The current size of the illustrator files are 133.3 MB and 24.7 MB I need to provide these at no larger than 450 kb AND the type must be readable and measurable for approval.
I have tried everything I can think of to provide the artwork small enough yet still retaining enough resolution to not make the type fuzzy and not able to be measured for size. I've tried making the files from within illustrator, I've tried taking everything into Photoshop to make the JPEGS with no luck. They want either a gif, jpeg or tiff no larger than 450 kb that is viewable at the print size of the label with no loss of resolution...
View 8 Replies
View Related
Feb 12, 2014
how do I close out of elements 12 without loosing all unedited pictures- I want to work on them at a later time
View 4 Replies
View Related
