I have some very old GB postage stamps which can be identified by their plate numbers. The plate number, which is engraved in the design of the stamp, has an effect on the stamp's value. Unfortunately on a number of stamps the cancellation mark obliterates the plate number. I would like to be able, in a digital image, to lift the image of the cancellation mark to reveal the design underneath.
I have tried using Adobe and Corel imaging software without luck.
How do I quickly separate an image's channels into grayscale layers? I'll need to do this frequently, so is there an automated way? If there isn't, can it be done with python scripting? Would it take me a long time to learn how to write such a script assuming I know a bit of Python (as used in Blender), but haven't done any scripting with GIMP?
How to separate layers in gimp and save them in png format, theres a function for this in photoshop, so how do you do this in gimp? Basically i designed a template and i want to be able to click any layer and save it in png format but its not letting me, or how to save all layers automatically?
I'm new to GIMP. I want to use it to create/test colour (or greyscale) separations for a woodcut, but I'm finding it hard.
For example I have attached a black and white image. kirsty.JPG (84.7K)
Number of downloads: 3
I open the image in GIMP, then from Image I choose mode - indexed, 4 colours. So far so good as this gives me the 4 greyscale levels I need to create a two block woodcut. Now I use the 'select by colour' tool to find the first colour, and I paste this into a new layer. That works fine. Then I select the next colour and try to paste that into a second new layer, but it doesn't work. It produces another layer called 'Floating Selection (pasted layer)' and won't paste the second or third layers.
How can I separate the 4 layers into individual images??
I have an image that I've made in illustrator / Photoshop and I noticed that when I save the image as a JPEG out of Photoshop after it is finished it looks way different that it does while in Photoshop.
I merged the layers just out of curiosity and it looks that way after all of the layers are merged. Why it is doing that. Is there something I can do to change this? it is just happened to one of my images. I have multiple pieces in this style and it hasn't happened to any of the other ones.
I am trying to save all the layers I have in my PSD file as separate layers in a folder that I created. I trying to do this by going to File- Scripts- Export Layers to Files but when I set it up and do this I get an error message saying:
"General Photoshop error occured. This functionality may not be available in this version of Photoshop. -The command "Duplicate" is not currently available."
I am not sure why this is saying "this version" considering I installed it not too long ago and the document has been made a few days ago meaning I never even used another version of photoshop. I have all the layers visible too and even selected them. I am using Photoshop CS6 by the way.
I have two jpg images in two separate windows. I want to put one of the jpgs onto the other...like layering it over a particular part of the other image. When I attempt to do this the image doesn't show up in the receiving window and disappears from the originating window. I also tried to do a regular copy and paste between open windows and that doesn't work either.
I need to find out what process is employed to separate an image from its background. An image from one of the image services for example. I need for the actual image to be shed of the often white background in order to better work with an existing background on the graphic. It seems straight forward enough, I just have limited computer graphic chops.
I am working on tiny comic-strip frames that are being drawn as seperate images and when it comes to colouring, there is a time-consuming snag where I forget the exact colours of the finished frames which I need to keep checking and seeing earlier single images in order to compare and then reproduce the colours accurately in a consistent sequence.
Believe it or not, I get around this problem by taking digital still camera shots direct off the screen and consulting them afterwards! This does work, but it's hardly practical------is there an easier way to repeat the exact same colors on a separate image, without having to constantly refer to pre-existing images within GIMP? If I can reproduce the exact colours on different images automatically without having to recheck earlier images, this would save me a lot of time!
[Ideally, does every shade of colour have a code number or similar method I can enter and it will come up again accurately? This way, I could write down the shade number and repeat it exactly later on a new image where the exact same colour is required.]
The sheer number of shades of colour and tones make it very difficult to remember the exact colours accurately.
I use gimp to make layered stencils for spray painting...I reduce it to a couple of colours, seperate the colours into different layers and then cut them out...
When I do im left with a ghost type image where the original layer was..
I downloaded an image of the internet to edit [URL]......
Because I want to edit the base and put clothes on it and such. I opened the image in gimp and added the lines for the clothes on multiple layers. I went in to color it and the color showed up grey, any color i used turned out to be grey. Then I looked up at where they put the name of the image and it says: (greyscale, 6 layers) I assume that why i cant color it. is their any way to change this so i can add and edit color?
I'm having some issues using either GIMP or PS to do this, so I figured I'd ask here. when it comes to image editing and tasks like this, but I'm currently being asked to do something for a job.
I need to take a single image which is a restaurant floor layout, then make it so all of the tables on the image are a different layer so that they can be moved around/customized accordingly.
As far as I can tell, this would involve creating layers, copying the tables from the main image, pasting them all on top as their own layer, and then sliding them around from there.
Is there any easy way to do this, or am I completely off-base?
how to place an gif between two layers (or add text, brushes, images over it) without screwing up the animation. I've experimented with it, and the results tends to be that one of the layers (pictures) go missing in the animation or the animation just does not animate.
In the attached image, it comes up as one layer. What I want to do, is change the background gradient. So I guess I need to move the image of the bus to another layer and then change the background. But I don't know how.
I would like to transfer several layers from one image to another larger image and have the layers maintain their original alignment to one another. When I simply drag the layers from the layer window to the target image, they typically are not aligned when they arrive.
How & where to modify my ''Underlying layers'' for an image I am working on.
The overall project/design is for a t-shirt mock-up template. The whole idea is to make it as realistic looking as possible (photorealistic)
I found a great tutorial (which unfortunately was made for photoshop...) I was to follow it and pretty much apply the instruction to Gimp. However, there is part where the ''Underlying layers'' are being tweeked.
I am able to follow everything up to (4:32) [URL] ...........
I have been trying out gimp and i'm getting the hang of the basics but what i would like to know is how can i scroll multiple layers on the same image,
i have been using the 'move path' function and i can get one layer to scroll but how do i add more layers to the image? i want one text layer to scroll horizontally and then another different text layer to scroll vertically but at the moment i only get one or the other.
first post from relatively new user of Gimp 2.6.7 on Vista.
I'd like to be able to quickly fit the image to the visible layers -- usually just one layer, in fact. I'm currently doing it by drawing a rough marquee and then correcting it at high magnification before using Fit Canvas to Selection, but there must be a better way! :roll:
I created an image in gimp and flattened it before saving. I now want to edit some of the text in that image, but when I open in Gimp "As Layers" or just open it, it does not open in three different layers, like I had before flattening it. Am I doing something wrong. I saved it as a jpg file after flattening it.
I'm using Gimp 2.8.2 on Linux. I've configured the UI to single-windowmode and have opened multiple images, each with a tabbed display.
It is my understanding that I should be able to grab a layer from oneimage and drag-and-drop it onto the tab of another image in order toappend a copy of that layer in the new image. I have not been able to dothis. I'm grabbing a layer from the layers dialog and dragging it to the tab-thumbnail, but the layer is not copied to the new image.
A couple of comments for the UI designers:
* I find the [X] icons on the image tabs to be a real problem getting accidentally selected and dismissing the image when attempting to quickly select another tab. I would prefer another tab dismissal method such as right-click-menu close.
* Some user control over the tabs would be good. For example, I would like to see the the vertical height of of the tabs be smaller and have the option of displaying file names and/or icons.
I have an image with many layers. I want to cut a vertical strip out of the middle of one of the layers because I want to narrow the transparent gap between the left side of that layer and the right side. That is, my image has stuff on the left side and stuff on the right and a gap in the middle through which shows the pattern in the layers below, and I want to narrow that middle gap. I want to do the same thing as cutting a vertical strip down the middle of that top layer with scissors so I can scrunch the sides together, so less of the patterns on the layers behind shows through.
Is there any way to do this? It doesn't work when I simply select the area I want to cut and click "cut" or "clear" - those commands don't get rid of the canvas in that section, just the contents, which are transparent anyway.
I'm trying to avoid resizing the canvas and then laboriously reconstructing the layer with all the finicky alignment issues, because that seems unnecessarily time-consuming, when all I need to do is remove a gap in a blank section. I tried using guides to guillotine the image, but that, too, is turning out to be time-consuming in terms of reassembling the image. I know I must be missing something obvious - how does one simply remove a selection of the canvas (and not of the image itself) with the selection tool?
I have an image that I resized and that resulted in a gray checker board pattern above and below the original photo. I tried to add another photos above by copying and pasting it but get nothing I can see.
I tried merging visible layers but that did nothing (obviously since the copied photo is not visible).
Specifically I open the second photo, Select > All, Edit > Copy, went to the first image Edit > Paste resulting in a outline box of about the right size but without anything in it. I dragged this to the place I wanted it but I cannot get it to become visible. When I anchored the layer the outline box went away.
I have two layers but the second layer appears to be exactly like the first one.
I figured out how to use the layers option to fade an image into white for a Blackberry theme I'm making. After getting the hang of that, I figured I could try the same thing with a different image. But instead of opening up both images in different colors, both show up as the color of the first image. Both images are png files, the same file format that I used the first set of images for. I have not changed the size nor made anything transparent.
I figured out how to use the layers option to fade an image into white for a Blackberry theme I'm making. After getting the hang of that, I figured I could try the same thing with a different image. But instead of opening up both images in different colors, both show up as the color of the first image. Both images are png files, the same file format that I used the first set of images for. I have not changed the size nor made anything transparent.
I'm a Gimp newbie, using 2.8.4. I have a png image that's 530 pixels wide. I'm trying to merge it with a white background layer that is 960 pixels wide. I need to align the image to the right side of the background layer. This is what I did:
- opened my image - created background layer (960 px wide) - made background layer the bottom layer - clicked on Alignment tool - clicked the hand cursor on the image (530 px wide) - made the background layer the active layer - set "Relative to:" Active layer - clicked on the right alignment arrow
The image did move to where I wanted it, but most of the image from the right edge disappeared, so all I've got is a small portion of the left side of the image in the middle of my background layer. Then I did the following:
- merged visible layers with Expand as necessary
That action merged the layers, but all I have is a small part of my image near the center of the background.
Attached File(s) Screenshot from 2013-06-25 19:41:24.png (59.32K)
how do I make the layers of the image follow the contours of the book background to make it look more realistic like it is text in the book? I have an open book background and I want all my layers in the xcf file follow the curves of the book, how do I do that?
I have several icons that I would like to recolor. My thought was to figure out how to normalize and image colors (based around your 9 basic colors, black, white, red, green, orange, blue, yellow, purple, brown). Then I want to separate those colors into their own layer. I would prefer to doe this in an action as well.
I try to use the circle, rectangle or line tool, it forms a new layer wich cannot be edited directly. I found a way to get around the "not being able to edit directly" part (by rasterizing the layer) but I don't know how to get all the shapes into one layer.
For example, when I draw a rectangle, it forms a new layer which I have to rasterize. Then when I draw lines in rectangle, it is part of a new layer, which once again, I have to rasterize. Now that I have these lines in a rectangle, I tried coloring 1/3 of the rectangle blue using the first line as a closing line. It ended up coloring my whole screen. I tried grouping the layers and then coloring.