GIMP :: Quickly Separate An Image's Channels Into Grayscale Layers?

Nov 8, 2012

How do I quickly separate an image's channels into grayscale layers? I'll need to do this frequently, so is there an automated way? If there isn't, can it be done with python scripting? Would it take me a long time to learn how to write such a script assuming I know a bit of Python (as used in Blender), but haven't done any scripting with GIMP?

View 2 Replies


ADVERTISEMENT

Photoshop :: Grayscale Files To Separate Color Channels

May 12, 2008

I have a set of grayscale images that I want to combine such that each image becomes a color channel...

View 1 Replies View Related

GIMP :: How To Quickly Fit The Image To Visible Layers

Dec 22, 2009

first post from relatively new user of Gimp 2.6.7 on Vista.

I'd like to be able to quickly fit the image to the visible layers -- usually just one layer, in fact. I'm currently doing it by drawing a rough marquee and then correcting it at high magnification before using Fit Canvas to Selection, but there must be a better way! :roll:

View 9 Replies View Related

GIMP :: Image In Grayscale (6 Layers)

Feb 22, 2011

I downloaded an image of the internet to edit [URL]......

Because I want to edit the base and put clothes on it and such. I opened the image in gimp and added the lines for the clothes on multiple layers. I went in to color it and the color showed up grey, any color i used turned out to be grey. Then I looked up at where they put the name of the image and it says: (greyscale, 6 layers) I assume that why i cant color it. is their any way to change this so i can add and edit color?

View 1 Replies View Related

GIMP :: Display Color Channels In Grayscale?

Nov 11, 2012

Is there a preference in GIMP to display color channels in grayscale? Rather I should ask, has this issue been resolved because I know at one time it was a big difference between PS and the GIMP. And yes, I know that I can decompose and recompose...

View 5 Replies View Related

GIMP :: How To Separate Layers In Image

Jun 4, 2012

I have some very old GB postage stamps which can be identified by their plate numbers. The plate number, which is engraved in the design of the stamp, has an effect on the stamp's value. Unfortunately on a number of stamps the cancellation mark obliterates the plate number. I would like to be able, in a digital image, to lift the image of the cancellation mark to reveal the design underneath.

I have tried using Adobe and Corel imaging software without luck.

View 6 Replies View Related

Photoshop :: Image Thumbnails In Channels Pallet Not Showing Up As Grayscale?

Sep 8, 2013

Why are the image thumbnails in the channels pallet not showing up as grayscale images?  They used to, and for some reason or another aren't any more for me.  Instead, they are showing up red, green, and blue for each respective channel.  I'm on Mac, using CS6.

View 3 Replies View Related

GIMP :: How To Quickly / Easily Select Box-full Of Layers At Once

Aug 31, 2012

Due to my familiarity with Inkscape, I did this in Gimp. I chose the Select tool ( R ) and selected several images in one column. I thought, that I would see all the boxed-in layers selected for easy duplication, but nope.

So how can I quickly/easily select a box-full of layers at once, a la Inkscape?

See attachment.

View 2 Replies View Related

GIMP :: Quickly Move Through Layers Viewing One At A Time?

Sep 17, 2012

I just want to draw some simple animations, and I was thinking of using the layers as frames, like with gif creation. I know you can use pageup and page down to quickly shift focus from one layer to the next, but is there a way to only have the current layer visible without having to mess with the visbility toggle for each layer?

View 4 Replies View Related

GIMP :: Layers / Channels / Paths Will Not Display

May 14, 2012

I cannot bring up Layers, Channels, or Paths. Running Gimp 2.6.10 on a Windows 7 machine. Selecting Windows...Dockable Dialogs...Layers or Channels or Paths does not bring up a new dialog window. Also there is nothing in Windows...Recently Closed Docs

This occurs regardless of image file opened. Not sure how long this has been the situation as I have not been using gimp on the computer where this problem is occurring for a couple months. Am not an advanced user though have used it occasionally for years. All other Selecting Windows...Dockable Dialogs... actions bring up window boxes normally. Tab does toggle display for the Toolbox etc. Just Layers, Channels, or Paths have an issue and I suspect it may have occurred because they were sharing the same window box. I did reset Preferences.

I am able to readily create layers on top of a base image but without the dialog box, only have access to the last one created. Also can merge down the last new layer or flatten the image. My suspicion is gimp may be displaying the dialog box at XY coordinates beyond my monitor screen displayable coordinates. There is a configuration file that saves the last used settings that I can simply delete?

View 4 Replies View Related

GIMP :: How To Get Layers / Channels And Paths Toolbar To Appear

May 15, 2013

How do you get the 'Layers, Chanells and Paths' tool bar to appear. I am running Xubuntu 12.04, Gimp 2.6.12 and it does not appear. Can not upgrade to 2.8 because Ubuntu Software Center does not have it. I need this sub-window to wotk with test-along path.

View 3 Replies View Related

Photoshop :: I Want Grayscale, But I Still Need My RGB Channels

Jun 10, 2007

I need to convert an image to Grayscale in CS2, but I need to retain my RGB channels. I need them because a special bump map tool that I have, which also converts images to DDS format, requires them. And I need to make my bumpmaps with this tool because of the special format that dds files require for the game I am using these textures in.

I've been using the Photocopy filter, but I feel it leaves the image a bit "dirty." I'd like a clean Grayscale conversion.

View 5 Replies View Related

GIMP :: The Layers / Channels / Paths Dialog Window Doesn't Appear On Screen?

Feb 3, 2012

The Layers, Channels, Paths Dialog Window doesn't appear on my screen. Have tried everything I can think of.

View 2 Replies View Related

GIMP :: Layers / Channels And Paths Dialog Window Not Appearing On Screen

Jan 21, 2012

The Layers, Channels, Paths Dialog Window doesn't appear on my screen.

View 1 Replies View Related

GIMP :: Separate Layers To PNG?

Oct 6, 2012

How to separate layers in gimp and save them in png format, theres a function for this in photoshop, so how do you do this in gimp? Basically i designed a template and i want to be able to click any layer and save it in png format but its not letting me, or how to save all layers automatically?

View 4 Replies View Related

GIMP :: How To Separate 4 Layers Into Individual Images

Aug 3, 2012

I'm new to GIMP. I want to use it to create/test colour (or greyscale) separations for a woodcut, but I'm finding it hard.

For example I have attached a black and white image. kirsty.JPG (84.7K)

Number of downloads: 3

I open the image in GIMP, then from Image I choose mode - indexed, 4 colours. So far so good as this gives me the 4 greyscale levels I need to create a two block woodcut. Now I use the 'select by colour' tool to find the first colour, and I paste this into a new layer. That works fine. Then I select the next colour and try to paste that into a second new layer, but it doesn't work. It produces another layer called 'Floating Selection (pasted layer)' and won't paste the second or third layers.

How can I separate the 4 layers into individual images??

View 4 Replies View Related

GIMP :: How To Move RGB Channels From One Image To Another

Nov 14, 2013

I need to move one color channel from one image to anther and completely replace the channel.

View 3 Replies View Related

GIMP :: Color Coding For Grayscale Image?

Oct 28, 2013

I need to transform a selection of ranges of grayscale image in colors. For example: using GSM of a gray scale image as a parameter I want to recode pixels from 0 to 20 in red, 21 to 40 in orange, 41 to 60 in yellow and so forth... until pixel valued 256 in GSM.

View 2 Replies View Related

Photoshop :: Flattened Image Looking Different Than When Layers Are All Separate

Nov 11, 2013

I have an image that I've made in illustrator / Photoshop and I noticed that when I save the image as a JPEG out of Photoshop after it is finished it looks way different that it does while in Photoshop.

I merged the layers just out of curiosity and it looks that way after all of the layers are merged. Why it is doing that. Is there something I can do to change this? it is just happened to one of my images. I have multiple pieces in this style and it hasn't happened to any of the other ones.

View 2 Replies View Related

VideoStudio :: Separate (different) L And R Audio Channels

Apr 26, 2007

I need to make a video file which has different sound in the left and right channels. I have the sounds as separte files. Do I can make VS play one of these in the left channel and the other in the right channel? If it's not possible with VS, can MovieStudio do it?

View 4 Replies View Related

GIMP :: Image Won't Save As GBR After Changing Mode To Grayscale?

Oct 3, 2011

i'm using gimp 2.6.11 on a windows 7 enterprise machine. I made some brushes in rbg mode and saved as gbr, and also converted some ps brushes by exporting an abr as a png in rbg mode then saving as gbr. my goal is to get a gbr brush that i can change the color to the foreground color. I tried changing the mode from rgb to greyscale but when i try to re-save as gbr i get an error message that brushes can only be saved in greyscale or rgba (!).

i've tried saving the gbr as a png, changing the mode to greyscale and then saving as gbr but i get the same error message.

Any good skin texture brushes for gimp that can be used with foreground color? It's for a digital portrait of a male so I need an orangepeel texture and some other skin textures that aren't too airbrushed.

View 2 Replies View Related

GIMP :: Applied Filters Change Image To Grayscale?

May 23, 2013

I'm new to GIMP. I've used Adobe Photoshop for years an years and no longer have access to the license. So I've been giving GIMP a test drive for a little while. I'm confused as to why when I apply a filter to my image or layer it changes the color to B/W or grayscale? I'm sure this is a relatively easy fix, but most filters I'm using don't have many options and I can't seem to apply the filter "as is". It always changes my whole graphic to grayscale. See "Before & After" attachments.

View 1 Replies View Related

GIMP :: Use Layer Mask With Grayscale And Inverted Image

Dec 31, 2012

I've had gimp for quite awhile now and ive never come across this problem before. im trying to use the layer mask with greyscale and inverted image just as i always have. but when i go to edit my color i get grey! ive always been able to change colors this way! i know that the mode is set to rgb. im on the correct layer. ive closed it. ive restarted my laptop.

If i click on the transparency part i get a big blob of color as i should. but on the mask it does what its supposed to but in shades of grey. i dont understand whats wrong! it always worked perfectly. . .

newest Gimp
windows 7

Only thing that i have changed is i have a new tablet but i still have the problem without the tablet

View 1 Replies View Related

Photoshop :: Saving Layers As Separate Image Files?

Jun 24, 2013

I am trying to save all the layers I have in my PSD file as separate layers in a folder that I created.  I trying to do this by going to File- Scripts- Export Layers to Files but when I set it up and do this I get an error message saying:
 
"General Photoshop error occured.  This functionality may not be available in this version of Photoshop. -The command "Duplicate" is not currently available."
 
I am not sure why this is saying "this version" considering I installed  it not too long ago and the document has been made a few days ago meaning I never even used another version of photoshop.  I have all the layers visible too and even selected them.  I am using Photoshop CS6 by the way.

View 3 Replies View Related

GIMP :: Grayscale Image Displays In Gray - Prints In Color

Jan 11, 2014

I have an image that has elements pasted in from PNG files, and those elements have some shades of green. I want printed output in gray scale only, so I did Image -> Mode->Grayscale. The image on screen went gray as I wanted. When I print it, however, I get an image in which *some* of the colored parts still are colored!

View 1 Replies View Related

GIMP :: Make Grayscale Image Into Alpha Transparency Channel

Oct 21, 2012

Is there any way I can directly make a grayscale image into an alpha transparency channel?

I mean, NOT involving selection? Because selection by color to layer mask,is really difficult what I need to do the selection threshold.

Why is it easy to turn an alpha channel into a grayscale image but not the reverse?

View 3 Replies View Related

CorelDRAW Graphics Suite X5 :: Proper Way To Separate Layers On Image

May 25, 2012

How to separate layers on an image prior to printing?

View 2 Replies View Related

Photoshop :: How To Import Four Separate Images ( TIFFs) Into Four Channels

May 5, 2012

How do you import four separate images( four separate TIFFs) into four channels?

View 3 Replies View Related

Photoshop :: Save Color Channels As Separate Files

Mar 25, 2013

Is there a possibility to save every color-channel on my document as separate files (cmyk and rgb) ?

View 9 Replies View Related

GIMP :: Two Separate JPGs - Want To Put One Image On The Other

Jan 21, 2014

I have two jpg images in two separate windows. I want to put one of the jpgs onto the other...like layering it over a particular part of the other image. When I attempt to do this the image doesn't show up in the receiving window and disappears from the originating window. I also tried to do a regular copy and paste between open windows and that doesn't work either.

View 5 Replies View Related

GIMP :: Filling White Object With Colour Whilst Keeping Rest Of Image In Grayscale?

Jul 31, 2011

My image is in grayscale though it's recognised as RGB. It contains structures in white which I would like to fill with a colour. So basically, I'd like for all the white in the image to show up as e.g. red.

How do I do that? I'm guessing it must be possible to have a red layer and somehow this will then fill the white, but I'm getting confused with background and foreground filling options and I don't know which transparency options I have to choose.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved